Guest petje Posted November 30, 2022 Share Posted November 30, 2022 (edited) The error you got in GL is a very generic one, it could be anything, a setting in GL or incompatibility with Windows 7, or even your hardware. GL is a bit complex to setup, with all the settings it got, but runs games other loaders do not, so ..... choices. But that said, the other loaders are easier to setup. Don't use the files from the YT video, but from the link I gave you, those are "clean" dumps. Edit: they are not !! Some of those VM dumps contain a bunch of crap from other people whom tried to get the game working in their own way and failed. So it could be those dumps do not work, ever. I DM'd you, check your inbox, enjoy ! Follow the settings as given here Just the basic settings to get the game working, the side art and such can be done later if needed. Edited November 30, 2022 by petje Link to comment Share on other sites More sharing options...
NightKitty Posted November 30, 2022 Share Posted November 30, 2022 2 hours ago, Shahram said: thanks for your information. I have read about them somehow. I did all it needs to be run. Try different video loader modes... Here is some info i collected when testing.. Might be differnt for you though. Gouketsuji Ichizoku - Senzo Kuyou for NESiCAxLive v1.0.1 - Working Loader: Tekno Parrot - N, GLARH - Y, Jconfig - N GLARH settings Working Loader Mode: 0, 6, dg Notes: TeknoParrot will load game but gives black sreen after intro video 1 Link to comment Share on other sites More sharing options...
Guest petje Posted November 30, 2022 Share Posted November 30, 2022 (edited) 10 minutes ago, NightKitty said: GLARH settings For me 6 works and I use TTXConfig2.0.exe for input emulation, otherwise JVS 0303 error with JConfig. This is the Nesica version, with a bunch of crap placed into the CRAP folder, the dump on VM's site, I cleaned it up. https://ibb.co/4jmRv1Y The "normal" version for TTX2 afaik.https://ibb.co/F5DC6S6 Edited November 30, 2022 by petje Link to comment Share on other sites More sharing options...
NightKitty Posted December 1, 2022 Share Posted December 1, 2022 4 hours ago, petje said: For me 6 works and I use TTXConfig2.0.exe for input emulation, otherwise JVS 0303 error with JConfig. This is the Nesica version, with a bunch of crap placed into the CRAP folder, the dump on VM's site, I cleaned it up. https://ibb.co/4jmRv1Y The "normal" version for TTX2 afaik.https://ibb.co/F5DC6S6 What crap is in the crap folder? 1 Link to comment Share on other sites More sharing options...
Guest petje Posted December 1, 2022 Share Posted December 1, 2022 1 hour ago, NightKitty said: What crap is in the crap folder? All kinds of other files, for F knows what, all unneeded to run the game. I already deleted it, so if you really want to know, download it from VM's site. Link to comment Share on other sites More sharing options...
NightKitty Posted December 1, 2022 Share Posted December 1, 2022 (edited) 7 hours ago, Shahram said: I have some questions: How can we say objectively it is nesicaxlive verison or ttx/x2 version? and is there any reported graphical differences in them? nesicaxlive version released in 2012, 3 years after the ttx/x2 version so ther is maybe some? Here is my properties for a clean data folder for both TTX, and Nesica version. TTX is on the left, Nesica is on the right. I dont see anything that overtly shows a difference. I have a debug.ini file for the TTX version in the root folder The exe's are slightly different... Edited December 2, 2022 by NightKitty 1 Link to comment Share on other sites More sharing options...
Houb Posted December 1, 2022 Share Posted December 1, 2022 (edited) if ever this game should work perfect using ArcCabView (ttx and nesica version) Edit : At least with jconfig and a clean dump... Edited December 1, 2022 by Houb Link to comment Share on other sites More sharing options...
gamer9347 Posted July 24, 2023 Share Posted July 24, 2023 On 1/5/2021 at 8:49 AM, Layer said: I guess you can open a NxL2 Windows session and use Bitlocker recovery. User : typexiot Domain : DESKTOP-QOCI3PH Password : Passiot2017 Btw, you can use Nesicabrute tool posted on Facebook to extract all the vdimg_ec.img not locked by Bitlocker : https://mega.nz/folder/nIQBTYzL#yEmJ5nVFVkjfT7_ZMdiCfQ The link is down, any chance you could repost the Nesicabrute tool please? Many thanks in advance. 🙂 Link to comment Share on other sites More sharing options...
pic3k1 Posted July 28, 2023 Share Posted July 28, 2023 HI, I'm looking to the HDExes.7z pack in order to run games like Crimzon Clover in high resolution, but i don't find this pack anywhere...please can anyone help me? 1 Link to comment Share on other sites More sharing options...
arkadito3030 Posted October 21, 2023 Share Posted October 21, 2023 (edited) Hey!!!!!!! 🙄 I'm back after a long time. I see that you can now play some NSXLive titles on LAN under teknoparrot! How is that? 🤨🤔😯 how does the nesic card emulation work? I want to play the titles with the online option of Nesica lol. You know? How do I have to do? postscript: I have been able to play the blazblue croos tag batle (APM3) on the local network, using the same configuration that is used for the local network of tekken 7fr2 namco es3x. IP 192.168.138.254 GATEWAY: 192.168.138.1 and change the option in the croos tag batle test menu from 1p to 2p. but I want to play the nesicaxlive ones il y a 54 minutes, arkadito3030 a dit : Hey!!!!!!! 🙄 I'm back after a long time. I see that you can now play some NSXLive titles on LAN under teknoparrot! How is that? 🤨🤔😯 how does the nesic card emulation work? I want to play the titles with the online option of Nesica lol. You know? How do I have to do? postscript: I have been able to play the blazblue croos tag batle (APM3) on the local network, using the same configuration that is used for the local network of tekken 7fr2 namco es3x. IP 192.168.138.254 GATEWAY: 192.168.138.1 and change the option in the croos tag batle test menu from 1p to 2p. but I want to play the nesicaxlive ones my room lol 😁 . All that's left is to connect it to the network. I hope to find answers here. 😊 Edited October 21, 2023 by arkadito3030 Link to comment Share on other sites More sharing options...
Zen_B7 Posted October 21, 2023 Share Posted October 21, 2023 13 minutes ago, arkadito3030 said: solo falta conectarlo a la red. espero encotrar respuestas aqui. Only English and French on this forum !! 1 Link to comment Share on other sites More sharing options...
arkadito3030 Posted October 21, 2023 Share Posted October 21, 2023 il y a 43 minutes, Zen_B7 a dit : Only English and French on this forum !! I'M SORRY, I'VE ALREADY CORRECTED THE TRANSLATION 😊 Link to comment Share on other sites More sharing options...
eproxy Posted December 17, 2023 Share Posted December 17, 2023 aHR0cHM6Ly8xZmljaGllci5jb20vP2ljZWdwazEzN2JvNmJ2MXY0M2tp aHR0cHM6Ly8xZmljaGllci5jb20vPzhjeWxkc2RtdThhcDV6MjE0b2Vw aHR0cHM6Ly8xZmljaGllci5jb20vP2QzbXUyMXE4NjQ5eHRsdjV2ZGlq enjoy 5 Link to comment Share on other sites More sharing options...
Son of Blindboy Posted December 17, 2023 Share Posted December 17, 2023 Cheers! Link to comment Share on other sites More sharing options...
stanleyyeh0205 Posted February 18 Share Posted February 18 Does anyone know why "Dragon Dance" launched by Game Loader RH all just crashed without any screen? Sometimes, (I do mean "sometimes") the game can be launched by TeknoParrot but I'd notice "failed to initialize audio mixer". Link to comment Share on other sites More sharing options...
stanleyyeh0205 Posted February 29 Share Posted February 29 (edited) On 12/29/2021 at 8:23 PM, EmuAl said: i guess not lol well thanks everyone for the help with this but i give up with this one For anyone that has tried thousands of times to get the intro video and KOF Maximum Impact Regulation A a.k.a MIRA going, Don't give it up. Even though I have 3060ti, after I changed VIDEO_CARD to AMD, I have the intro. However, the sad story is that I am still not able to continue the game after counting down. Edited February 29 by stanleyyeh0205 Link to comment Share on other sites More sharing options...
Galaya Posted February 29 Share Posted February 29 (edited) 30 minutes ago, stanleyyeh0205 said: For anyone that has tried thousands of times to get the intro video and KOF Maximum Impact Regulation A a.k.a MIRA going, Don't give it up. Even though I have 3060ti, after I changed VIDEO_CARD to AMD, I have the intro lol. Have you tried it with tp as well? for me black screen on intro using nvidia gpu and tp 1218 Edited February 29 by Galaya Link to comment Share on other sites More sharing options...
stanleyyeh0205 Posted February 29 Share Posted February 29 7 minutes ago, Galaya said: Have you tried it with tp as well? for me black screen on intro using nvidia gpu GLRA or TP wouldn't even boot, just black screen after SNK. Link to comment Share on other sites More sharing options...
Galaya Posted February 29 Share Posted February 29 (edited) 8 minutes ago, stanleyyeh0205 said: GLRA or TP wouldn't even boot, just black screen after SNK. Thanks still searching a solution for tp without success so far btw if you press coin it’ll take you to title screen and gameplay is fine just no intro video Edited February 29 by Galaya Link to comment Share on other sites More sharing options...
hippopippo Posted February 29 Share Posted February 29 Kof Mia intro video uses the directdraw overlay which Windows 10+ no longer supports since several updates (many years ago) Use the program and see. dxcapsviewer.exe 1 Link to comment Share on other sites More sharing options...
stanleyyeh0205 Posted February 29 Share Posted February 29 4 minutes ago, Galaya said: Thanks still searching a solution for tp without success so far btw if you press coin it’ll take you to title screen and gameplay is fine just no intro video I have another KOF MIRA that can be launched by TK without intro and still crashes after counting down. Link to comment Share on other sites More sharing options...
Galaya Posted February 29 Share Posted February 29 6 minutes ago, stanleyyeh0205 said: I have another KOF MIRA that can be launched by TK without intro and still crashes after counting down. yes it happens here as well the crash after the fight ends also @hippopippo thanks for the info Link to comment Share on other sites More sharing options...
stanleyyeh0205 Posted March 7 Share Posted March 7 On 2/29/2024 at 10:28 PM, Galaya said: yes it happens here as well the crash after the fight ends also @hippopippo thanks for the info So weird that KOF MIRA intro video is totally fine on my humble laptop with INTEL 520 graphics card without any patch. Link to comment Share on other sites More sharing options...
joe555 Posted March 7 Share Posted March 7 (edited) Not so strange, I have 2 different PC that can run it with intro, one is a laptop other is desktop, both win 10 no patches , desktop has 1050ti and laptop has some built in Nvidia one Edited March 7 by joe555 Link to comment Share on other sites More sharing options...
Galaya Posted March 7 Share Posted March 7 2 hours ago, stanleyyeh0205 said: So weird that KOF MIRA intro video is totally fine on my humble laptop with INTEL 520 graphics card without any patch. With tp using win10 os and a clean dump? Link to comment Share on other sites More sharing options...
stanleyyeh0205 Posted March 8 Share Posted March 8 13 hours ago, Galaya said: With tp using win10 os and a clean dump? No. Just Gameloader All RH. See my screenshot. Besides, even though I posted that I was able to see the intro, it was just random in-game fighting scene, not the real intro. So weird. I am sorry if my previous posts on KOF MIRA confuses anyone. Link to comment Share on other sites More sharing options...
Galaya Posted March 8 Share Posted March 8 (edited) 16 minutes ago, stanleyyeh0205 said: No. Just Gameloader All RH. See my screenshot. Besides, even though I posted that I was able to see the intro, it was just random in-game fighting scene, not the real intro. So weird. I am sorry if my previous posts on KOF MIRA confuses anyone. The intro video file of kof mira is kof_op.sfd maybe there's a way to encode it to work with tp and win 10 os using a clean dump sadly still haven't found any Edited March 8 by Galaya Link to comment Share on other sites More sharing options...
wallmachine2017 Posted March 18 Share Posted March 18 On 10/28/2022 at 5:25 AM, gStAvEn said: Thanks Joe that would be awesome. Looking forward to hear from you ❤️ edit: All worked great and it works both for Raiden III and Raiden IV NesicaX version, full speed a head now 😄😄 Thanks again Joe!! could you post the settings? Link to comment Share on other sites More sharing options...
joe555 Posted March 18 Share Posted March 18 6 hours ago, wallmachine2017 said: could you post the settings? Add dgvoodo and put your settings like so Link to comment Share on other sites More sharing options...
gasabbath Posted July 29 Share Posted July 29 For KOF MIRA, as some user said, for those who use nvidia card like me, changing the video card type to AMD in the .ini allows me to skip the intro and star the game and everything works fine. Link to comment Share on other sites More sharing options...
drewjbs Posted August 31 Share Posted August 31 Going through my TTX section.. the NesicaLive game Exception seems to be broken. It launches with Jconfig/Nesica Unlocker but I get an error shortly after game start (game music still going but this error window pops up) This game is very cool and I do not see any other versions (not that I know of), also TeknoParrot does not support this. It is worth preserving this one. Link to comment Share on other sites More sharing options...
buck116 Posted August 31 Share Posted August 31 (edited) 6 hours ago, drewjbs said: Going through my TTX section.. the NesicaLive game Exception seems to be broken. It launches with Jconfig/Nesica Unlocker but I get an error shortly after game start (game music still going but this error window pops up) This game is very cool and I do not see any other versions (not that I know of), also TeknoParrot does not support this. It is worth preserving this one. Are you using W10 or 11 - Nvidea, AMD or Intel Gpu? I'm using W10 22H2 and on an Intel laptop and it's running fine for me with Nesica Unlocker. No errors like the above. Also using iDmacXv2.0_2023_01_16 Edited August 31 by buck116 Link to comment Share on other sites More sharing options...
joe555 Posted September 2 Share Posted September 2 Love the intro, game with intro still plays fine here 1 Link to comment Share on other sites More sharing options...
jcstahl1 Posted September 2 Share Posted September 2 1 hour ago, joe555 said: Love the intro, game with intro still plays fine here works great with your dgvoodoo settings. i guess some people just can't read, or just want everything done for them. Link to comment Share on other sites More sharing options...
joe555 Posted September 2 Share Posted September 2 You do care since you posted about it, and I also have it running fine in TP with clean dump 1 Link to comment Share on other sites More sharing options...
joe555 Posted September 2 Share Posted September 2 (edited) No need to have modded, works perfectly , also continue to lie, you do use mods, I see you all the time ask about English translations and 4k patches, you also prob tried the win 10 patch for this, keep lying , you care a great deal, and the intro is great , love being able to watch it, funny also that you use fixes I post , I see your still giving yourself likes, LOL pathetic Edited September 3 by joe555 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now