joefish Posted March 12 Posted March 12 7 minutes ago, mamefan1 said: I tried all the games and some keys worked... 5 is coin F1 is test button F2 is service Working buttons W a s d x c q e I could not get p1 start to work with wangan games i got black screen after chihiro logo and dont go in game - whats the trick ?
mamefan1 Posted March 12 Posted March 12 (edited) dont know... same thing happens to me with the release version. The W7 version gives me a dashboard error. I found a working dashboard, but then it gave a cant read the disk error in the dashboard... not an emulator error. Outrun was giving me a drive board not connected error. Edited March 12 by mamefan1
jonathanhooper Posted March 12 Posted March 12 just tested = "failed to init xboxrenderstates" on wangan 1/ 2 ! virtua cop 3 works fine ? 0_o
mamefan1 Posted March 12 Posted March 12 Quote 58 minutes ago, jonathanhooper said: just tested = "failed to init xboxrenderstates" on wangan 1/ 2 ! virtua cop 3 works fine ? 0_o I got this. I saw a github post that dashboards greater than 4920 are not supported, so i found an older one. but then i got this.
brudibru Posted March 13 Posted March 13 I can launch all the games except the Wangan ones, with the Yaca version (The release version runs into memory allocation errors and the debug one just doesn't launch anything). Some games doesn't go far (crazy taxi, Outrun special tours, sega golf,...), some have major graphical issues (ollie king) but they all at least start the bios. The Wangan games are not and I just get an error message I wonder why it happens only with these games and why nobody else has reported this issue here (Am I the only one with this error ?) Anyway, I do understand that these CXBX forks are very WIP and I will patiently wait and hope for new versions. A big thank you to the devs and to Hippo, The Chihiro emulation has been neglected for too long and it is great to see something happening now.
scooby Posted March 13 Posted March 13 (edited) This is because you have to put the files in the A folder of the dump in the root game directory, where the data folder is. Edited March 13 by scooby
joefish Posted March 13 Posted March 13 18 minutes ago, scooby said: This is because you have to put the files in the A folder of the dump in the root game directory, where the data folder is. i did that but got black screen after chihiro logo and doesn't go in game
jcstahl1 Posted March 13 Posted March 13 1 hour ago, brudibru said: I can launch all the games except the Wangan ones, with the Yaca version (The release version runs into memory allocation errors and the debug one just doesn't launch anything). Some games don't go far (crazy taxi, Outrun special tours, sega golf,...), some have major graphical issues (ollie king) but they all at least start the bios. The Wangan games are not and I just get an error message I wonder why it happens only with these games and why nobody else has reported this issue here (Am I the only one with this error?) Anyway, I do understand that these CXBX forks are very WIP and I will patiently wait and hope for new versions. A big thank you to the devs and to Hippo, The Chihiro emulation has been neglected for too long and it is great to see something happening now. install an xbox dashboard. i used 4817. also clear symbol cache in the emu settings every time you change games.
brudibru Posted March 13 Posted March 13 Il y a 3 heures, scooby a dit : This is because you have to put the files in the A folder of the dump in the root game directory, where the data folder is. Thanks for the tip Scooby. Now the bios is starting but I have an error message: "can't open the xbe file" Il y a 2 heures, jcstahl1 a dit : install an xbox dashboard. i used 4817. also clear symbol cache in the emu settings every time you change games. I have done that and same fatal error. If I leave the xbe files in the folder A I have the same unknown disc error as Mamefan1. Thank you for the help anyway !
mamefan1 Posted March 13 Posted March 13 So to recap, put the files in the A folder into the root folder next to boot.id and data folder use a desktop that is lower than 4092, 4817 works good and put it in your Release-W7-Yaca\EmuDisk\Partition2 folder when game starts press F1+F2, you might be able to just press F1 Go to the game's sub test menu and turn off drive motor, and card reader if you are not going to use the card system. F1 - test F2 - service you might have to wait on black screen for a little bit. it takes a short while to load. 1
brudibru Posted March 13 Posted March 13 Il y a 4 heures, mamefan1 a dit : So to recap, put the files in the A folder into the root folder next to boot.id and data folder use a desktop that is lower than 4092, 4817 works good and put it in your Release-W7-Yaca\EmuDisk\Partition2 folder when game starts press F1+F2, you might be able to just press F1 Go to the game's sub test menu and turn off drive motor, and card reader if you are not going to use the card system. F1 - test F2 - service you might have to wait on black screen for a little bit. it takes a short while to load. Thanks mamefan1, my problem was that my wangan games were not in the same folder as the emu. Also If I move the files from the folder A it doesn't work, I have to copy them in the root folder and leave the A folder. Now wangan 1 is working but not the 2. I just got to a black screen and that's it. Strange behavior but that was to be expected and it will get better.
mamefan1 Posted March 14 Posted March 14 (edited) For maximum tune 2 did you copy all 3 files from the a folder? Also make sure you are using a desktop below 4092. I had the black screen at one point but it is working now. You might have to keep the files in a folder... i have them there too, but i haven't tried removing the a folder. Games don't have to be in the same folder as the emulator. You just need to make sure the dashboard is in partition 2 in the emu emudisk folders and the bios files are in the chihiro folder Edited March 14 by mamefan1
joefish Posted March 14 Posted March 14 1 hour ago, mamefan1 said: For maximum tune 2 did you copy all 3 files from the a folder? Also make sure you are using a desktop below 4092. I had the black screen at one point but it is working now. You might have to keep the files in a folder... i have them there too, but i haven't tried removing the a folder. Games don't have to be in the same folder as the emulator. You just need to make sure the dashboard is in partition 2 in the emu emudisk folders and the bios files are in the chihiro folder i tried 4034 and 4817 but always black screen you said it takes a bit for loading - how much time ?
joefish Posted March 14 Posted March 14 ok its started but it hangs here and no matter if i use keyboard or joypad also f1 and f2 doesnt do anything
joefish Posted March 14 Posted March 14 (edited) yes nothing worked it doesnt boot always - i tried like 50 times and booted 3 times does it boots and goes in game always for you ? this emulator is like joe biden - really broken maybe one day will work - maybe Edited March 14 by joefish
mamefan1 Posted March 14 Posted March 14 Yeah these are the only 2 games that work flawless for me. The other games I can't start. I can put in coins but not start them
jcstahl1 Posted March 14 Posted March 14 2 hours ago, mamefan1 said: Yeah these are the only 2 games that work flawless for me. The other games I can't start. I can put in coins but not start them that's because this build is made specifically for the two Wangan games.
ultrabub563 Posted March 14 Posted March 14 Help Me... I Used The Right Bios of Spirited Away, But it Showed Like This: Is There A Way TO FIx This... Help Me... 😞
hippopippo Posted March 14 Posted March 14 rawinput emulation in progress .. get your guns ready (wip) 17
brudibru Posted March 14 Posted March 14 Thanks mamefan1 for the help !! I have Maximum tune 1 working with a 4034 dashboard but Maximum tune 2 doesn't (black screen when trying to reach the game's test sub menu, just like joefish). Can you tell us which dashboard you are using (and eventually where to find it) ?
brudibru Posted March 14 Posted March 14 Never mind, I have found the original XBOX dashboard in archive.org and now Maximum tune 2 works !
mamefan1 Posted March 14 Posted March 14 8 hours ago, jcstahl1 said: that's because this build is made specifically for the two Wangan games. i know... but even with the debug and release one i can't start them. i've tried every key. I'm using the w7 release only for wangan.
joefish Posted March 14 Posted March 14 can someone send me files emulator created in emudisk\partition 1 folder?
mamefan1 Posted March 14 Posted March 14 @joefish extract this to your partition2 folder https://download.digiex.net/Consoles/Xbox/Dashboards/Microsoft/Xbox Dash 1.00.4817.01 V1.1.zip 1
joefish Posted March 15 Posted March 15 7 hours ago, mamefan1 said: @joefish extract this to your partition2 folder https://download.digiex.net/Consoles/Xbox/Dashboards/Microsoft/Xbox Dash 1.00.4817.01 V1.1.zip i already tried it and got no benefit if you can send me files from partition 1 folder would be so kind 1
bucksoverfame Posted March 15 Posted March 15 Just want to say thank you to everyone who helps others out. 2
mjshl2 Posted March 17 Posted March 17 (edited) So as of right now are most of the games unable to start with this chihiro build? I really want to check out ollie king. Edited March 17 by mjshl2
Kiriya403 Posted Tuesday at 07:40 AM Posted Tuesday at 07:40 AM Any idea? Already selected xbe files but when i start it doesn't let me into chihiro screen
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now