atalec Posted January 14 Posted January 14 Hi, I have an issue, when I launch shooter.exe (decrypted), I see appear in my task bar but it desappear and the game dosen't launch. Idea ? Thx
lords Posted January 15 Posted January 15 (edited) On 1/14/2025 at 9:19 AM, atalec said: Hi, I have an issue, when I launch shooter.exe (decrypted), I see appear in my task bar but it desappear and the game dosen't launch. Idea ? Thx Disable your internet..it has been said here in the posts.....you can turn it back on once the game starts,if needed. Edited January 15 by lords 1
EncryptedMind Posted March 10 Posted March 10 4 hours ago, 7zxkv said: plugin updated 0.1 to 1.0. Does this go where the shooter.exe is?
jcstahl1 Posted March 10 Posted March 10 3 hours ago, EncryptedMind said: Does this go where the shooter.exe is? no. you need to install BepInEx 64bit and place it inside the plugins folder in the BepInEx folder after you extract and install it.
kkmedia Posted March 11 Posted March 11 I am still having problems with getting this game working. I used the dump that was on Page 1, I copied over the Decrypted EXE file, I setup the BepInEx folder with the DLL file in the plugins directory and I get is a black screen with two error messages(I also installed the Translator plugin). Is there another dump that is available?
jcstahl1 Posted March 11 Posted March 11 2 hours ago, kkmedia said: I am still having problems with getting this game working. I used the dump that was on Page 1, I copied over the Decrypted EXE file, I setup the BepInEx folder with the DLL file in the plugins directory and I get is a black screen with two error messages(I also installed the Translator plugin). Is there another dump that is available? did you just make a BepInEx and plugin folder? you need to actually download and extract BepInEx from their GitHub, into the game folder. need to use the x64 version of it. https://github.com/BepInEx/BepInEx/releases/download/v5.4.23.2/BepInEx_win_x64_5.4.23.2.zip
kkmedia Posted March 12 Posted March 12 It is a black screen with "Kamishu" and "Local phase desk interruption IO board interruption" in red text. @jcstahl1 I unzipped the BepInEx archive directly into the "Shooter" directory and copied the dll plugin in the plugins directory.
kkmedia Posted March 12 Posted March 12 I got it working! I did have the correct EXE file that I grabbed from here. I did a fresh install of the Main Program, unzipped the BepInEx archive, copied over the same EXE file, and the DLL plugin file and it started working. I believe it did not work the first time because I copied over the BepInEx folder from Family Guy Bowling and switched out the DLL file in the plugins directory and then unzipped the BepInEx archive. So thank you @jcstahl1 for suggesting that I unzip the BepInEx archive directly into the game folder, so that is what I did with a fresh install of the game. Thank again for your assistance!
jcstahl1 Posted March 12 Posted March 12 2 hours ago, kkmedia said: I got it working! I did have the correct EXE file that I grabbed from here. I did a fresh install of the Main Program, unzipped the BepInEx archive, copied over the same EXE file, and the DLL plugin file and it started working. I believe it did not work the first time because I copied over the BepInEx folder from Family Guy Bowling and switched out the DLL file in the plugins directory and then unzipped the BepInEx archive. So thank you @jcstahl1 for suggesting that I unzip the BepInEx archive directly into the game folder, so that is what I did with a fresh install of the game. Thank again for your assistance! no problem. and yeah, copying BepInEx from another game will almost always cause issues since it creates its own config & cache files for each game.
kkmedia Posted March 12 Posted March 12 @jcstahl1 As always, thank you! Even though you do not consider yourself "Tech Support", I always appreciate your assistance because it helps me to think harder about how to fix a problem. Sometimes it just takes for you to say "unzip the archive in the game folder" for me to just stop and think "Oh wait!, maybe that could be the issue, I copied over the directory from another game and then unzipped BepInEx and it did not work, what is my next step? Easy answer at that point, install a fresh instance of that game and VOILA! It works!!" So thank you again for providing guidance, keep it up!
312BhP Posted March 12 Posted March 12 When setting up the BepInEx translator for this game, if I already have DemulShooter installed do I overwrite the DS files please (doorstop_config.ini etc)?
argonlefou Posted March 12 Posted March 12 It's better to just add the plugin file in /bepinex/plugin/ Doorstop config and /bepinex/config file can have some different/specific settings 2
atalec Posted March 13 Posted March 13 Bonjour Je tente de lancer le jeu via Demulshooter, tout semble correct sauf que je vois l'icone du jeu en barre de tache s'afficher puis elle disparait. Le jeu ne se lance pas Un idée ? j'ai remplacé l'exe par celui fourni dans ce post mais pas mieux
argonlefou Posted March 13 Posted March 13 Le jeu ne se lance pas "via" Demulshooter, il se lance seul DemulShooter se lance avant/après et s'y attache. Donc avant tout, il faut un jeu fonctionnel seul
IronClaw Posted March 13 Posted March 13 4 hours ago, atalec said: Bonjour Je tente de lancer le jeu via Demulshooter, tout semble correct sauf que je vois l'icone du jeu en barre de tache s'afficher puis elle disparait. Le jeu ne se lance pas Un idée ? j'ai remplacé l'exe par celui fourni dans ce post mais pas mieux Disable your internet and try again.
nosoucy62 Posted March 13 Posted March 13 (edited) le jeu est installé sur quel lecteur ? à la racine du C ou autre part ? si autre part modification du fichier config avec le bon chemin ? ce probléme ressemble à un manque de dossier textures non trouvé.... une capture d'écran serait bien ! argon a raison......si déjà le jeu ne se lance pas ou mal demulshooter n'y fera rien tu as une image avec le titre du jeu qui se lance si j'ai bien compris ? Edited March 13 by nosoucy62
mr_punjana Posted March 18 Posted March 18 (edited) Hi guys trying to set this game up in TeknoParrot. I've got the game installed with the decrypted exe, and put BepInEx_Win_x64_5.4.23.2 which has created the BepInEx plugin folder etc and installed the latest patch from the Discord. Now I've got this error that says it uses a encrypted Unity Launcher and recommends using one from Hot Wheels or another unity game. I've copied the game.exe from one of the suggested titles into the main game folder with the shooter exe but now it says that same message again so no clue where to go from here? Any help would be much appreciated. Thanks. EDIT - got it working started again but this time I didn't give the directory a custom name left it the same as the archive unzipped folder, replaced with decrypted exe, installed BepInEX_Win_x64 into main directory, then added the plugin inside the BepInEx plugin folder and it ran first time so think the name of the directory has to be kept the same it then solved the boot issue. Edited March 18 by mr_punjana typo
Rhyader Posted May 20 Posted May 20 Hi, Mars sortie is running at low frame rate for me, even with a 3080 and i7 10700k: how can I run it smooth? Thanks!
mrparadize Posted May 20 Posted May 20 I have the same question as Rhyader. Very choppy frame rate.. On a 10series i7 and 2080, should be smoother. How can we run it smoothly? Launching through TP at 1080p
Rhyader Posted May 20 Posted May 20 For the slow framerate, I found that the camera that takes a picture of you before starting the game must be enabled: if disabled makes the game run slow; to enable/disable, I followed the demulshooter wiki. "Camera can be deactivated in the TEST menu (Main Menu → Option 1 → Option 1 → Option 5 → Small option to the right of the blue text at the bottom)" To change that small option, you have to use arrow up/down, then in the line below move with arrow right to the last option at the right and return to previous menu 2
bbilford83 Posted May 22 Posted May 22 (edited) Hi all. Has anyone figured out how to navigate/change settings in the test menu when running standalone? I can get to the test menu no problem with space, and clicking on each setting gets it to react, but like the early posters in this thread I can't actually change anything. Later thread comments suggest that folks have been able to change test menu settings but I assume that's in TP - are their any inputs that let you change settings aside from the ones identified in the early post from argonlefou? Thanks either way. Edit: solved it myself with some testing, keyboard right and left will change whichever setting you've selected. Edited May 22 by bbilford83
2xR91 Posted November 10 Posted November 10 Bonjour, j'ai essayé de suivre mais... quelqu'un aurai un lien avec le jeu plug and play ? Merci
miki91 Posted November 11 Posted November 11 https://mega.nz/file/p3sy3I5J#YQoFcB1FndCMcVtjkM3ZrAvPfbg2uISLOuOOPKQCa4Q 5
80sRkadeGuy Posted November 14 Posted November 14 (edited) Is there a way to turn crosshairs in standalone? I'm using a mouse to play. And is there a way to change the test menu language to English? Edit: I figured out how to change the language to English and I was able to turn on Crosshairs, but I keep getting a "Too many threads" error even with disabling my internet. Edited November 14 by 80sRkadeGuy
Silent Assassin Posted November 15 Posted November 15 (edited) Nice game Edited November 15 by Silent Assassin
RetrnArcGamer35 Posted Monday at 09:34 AM Posted Monday at 09:34 AM On 11/11/2025 at 6:31 AM, miki91 said: https://mega.nz/file/p3sy3I5J#YQoFcB1FndCMcVtjkM3ZrAvPfbg2uISLOuOOPKQCa4Q thank you, anyway, to change the language? 1
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now