SuperMagoAlex Posted March 7, 2020 Posted March 7, 2020 Just tested Nunchuck (+ Wiimote + touchmote), works perfect!
EmuAl Posted March 7, 2020 Posted March 7, 2020 1 hour ago, SuperMagoAlex said: Just tested Nunchuck (+ Wiimote + touchmote), works perfect! did you follow a guide or can you make one or just put what you did to get it going ?
SuperMagoAlex Posted March 7, 2020 Posted March 7, 2020 1 hour ago, EmuAl said: did you follow a guide or can you make one or just put what you did to get it going ? It's super easy, you need: 1 Dolphin bar 1 Wiimote 1 Nunchuck Touchmote software Select the "mode 4" of the dolphin bar, install Touchmote and pair wiimote, in Controller Configuration select "default". Now you'll be able to move the caracter with the Nunchuck stick and fly pressing the C button. For the magic I use a Leap Motion controller.
EmuAl Posted March 7, 2020 Posted March 7, 2020 4 minutes ago, SuperMagoAlex said: It's super easy, you need: 1 Dolphin bar 1 Wiimote 1 Nunchuck Touchmote software Select the "mode 4" of the dolphin bar, install Touchmote and pair wiimote, in Controller Configuration select "default". Now you'll be able to move the caracter with the Nunchuck stick and fly pressing the C button. For the magic I use a Leap Motion controller. yeah i was hoping you had the magic on the touchmote lol
Guest Onkel Posted March 7, 2020 Posted March 7, 2020 14 minutes ago, SuperMagoAlex said: Now you'll be able to move the caracter with the Nunchuck stick and fly pressing the C button. does the Z button work for you ?
SuperMagoAlex Posted March 7, 2020 Posted March 7, 2020 2 hours ago, Onkel said: does the Z button work for you ? Yes, use this MAGIDEIO.ini: Quit=Esc Start=Return Test=F1 Service=F2 Coin=F3 USBIO Up=W USBIO Down=S USBIO Right=D USBIO Left=A USBIO Switch1=1 USBIO Switch2=2 USBIO Switch3=3 USBIO Switch4=4 USBIO Switch5=5 USBIO Switch6=6 Analog Up=XINPUT_LEFT_ANALOG_UP Analog Down=XINPUT_LEFT_ANALOG_DOWN Analog Left=XINPUT_LEFT_ANALOG_LEFT Analog Right=XINPUT_LEFT_ANALOG_RIGHTUp Button=XINPUT_LEFT_TRIGGER Down Button=XINPUT_RIGHT_TRIGGER Lever Button=XINPUT_LEFT_THUMB 1
coolmax Posted March 11, 2020 Posted March 11, 2020 2 minutes ago, spiderzsoft said: https://www.oboom.com/NNV4OOVT https://mixdrop.co/f/947j57j8xu8qm https://nitroflare.com/view/3402933125C57A5/MagD.7z https://1fichier.com/?igxojvv5bm83z41d2qau https://letsupload.co/2aOyn/MagD.7z https://filerio.in/bfezcpn8ccol You're really quick dude, thank you very much!
gasabbath Posted March 17, 2020 Posted March 17, 2020 En 28/2/2020 a las 21:35, sagaopc dijo: On me, all buttons are the same atack... how to use other atacks? I am in the same situation. I doný understand the buttons function at all. And the .ini only works with xbox controller?
Guest petje Posted March 17, 2020 Posted March 17, 2020 (edited) 9 hours ago, gasabbath said: I am in the same situation. I doný understand the buttons function at all. And the .ini only works with xbox controller? There is only one attack style / button. The other buttons got the exact same function, attack. There is also a lever button, no idea why it is used. In total 3 buttons, attack, jump/fly and lever. And you will need a Leap Motion Maybe this of any use ? Ducon's fix works only for XInput (xbox controller) as far as i know. There are also DInput devices. (use original files) Edited March 17, 2020 by petje
gasabbath Posted March 17, 2020 Posted March 17, 2020 (edited) Thanks for your response. So, the only way of using the "hand attacks" is by having a motion sensor? Edited April 20, 2020 by 7zxkv
Guest petje Posted March 17, 2020 Posted March 17, 2020 (edited) 2 hours ago, gasabbath said: Thanks for your response. So, the only way of using the "hand attacks" is by having a motion sensor? Yes, at the moment. Maybe joystick / mouse emulation in the future, no idea when, if ever. Edited March 17, 2020 by petje
Swissychief Posted March 17, 2020 Posted March 17, 2020 That's the whole point of the game... Get a leap motion if you want to play it correctly... :/ mouse emulation wouldn't really work either, because a lot of the moves require really specific gestures and some even require 2 hands.
ducon2016 Posted March 17, 2020 Posted March 17, 2020 1 hour ago, petje said: Yes, at the moment. Maybe joystick / mouse emulation in the future, no idea when, if ever. I will look into it at some point, I have in my list but yes not sure when I can get to it. Will emulate the leap with mouse, but clearly there will be trade-offs and fidelity issues. Meanwhile someone can try to fiddle with the unreal config files, it might be possible to reassign leap stuff to keys.
ericpierre Posted April 4, 2020 Posted April 4, 2020 I have a question to ask. Every time I start the game by clicking bppgame.exe, my VR applications, including Oculus and Steam VR, also start. Does anyone have the same problem and does anyone know how to solve it?
raz Posted April 20, 2020 Posted April 20, 2020 is there possible to play Densha De Go on PC? by the way im newbie to this forum, many thanks!
gasabbath Posted April 20, 2020 Posted April 20, 2020 hace 6 horas, raz dijo: is there possible to play Densha De Go on PC? by the way im newbie to this forum, many thanks! Densha De Go arcade version is not dumped yet and probably never will.
Hydreigon Posted April 23, 2020 Posted April 23, 2020 Idk if multiplayer is possible in this game. Magician's dead (and Gunslinger Stratos) has some weird network issues where it's impossible to link cabinets locally. Because both are designed around multiplayer, I'm kind of curious why Byking didn't develop these games as a twin cabinet (akin to very early Namco games).
vitamina Posted October 14, 2020 Posted October 14, 2020 Hi people is possible save game with card and traduction game when power up player because only japan and i don't know select power up Thanks for answer.
bigcam Posted October 29, 2020 Posted October 29, 2020 (edited) On 3/6/2020 at 9:23 AM, SuperMagoAlex said: Hi can someone please tell me definitively at this point is it possible to play this game without the leap sensor or wiinmote. ive looked all over the internet and the best i can get using the latest jconfig dll is being able to move, lock on, leap, fly and melee attacks but no magic. Edited October 29, 2020 by bigcam
JimmyZ Posted November 7, 2020 Posted November 7, 2020 Most of the links are either too slow or not downloading (not found) does anyone have a mega or google drive link?
JimmyZ Posted November 29, 2020 Posted November 29, 2020 On 3/2/2020 at 9:24 AM, Trymado said: @PolybiusExtreme Magicien Dead Freeplay + English + Nesica Online + All Check OK https://drive.google.com/file/d/1c1wfff_Df9COoQKNvPnKiTlFNqOwB5Ls/view?usp=sharing Magicien Dead Insert Coin + English + Nesica Online + All Check OK https://drive.google.com/file/d/1k-dpx-RrH9FXarluLbQQHBBg4QHXf4Uc/view?usp=sharing Merci à @ducon2016 et @line pour l'aide This shows them in trash... can you reshare these?
ViRuS-MaN Posted November 30, 2020 Posted November 30, 2020 Le 02/03/2020 à 15:24, Trymado a dit : @PolybiusExtreme Magicien Dead Freeplay + English + Nesica Online + All Check OK https://drive.google.com/file/d/1c1wfff_Df9COoQKNvPnKiTlFNqOwB5Ls/view?usp=sharing Magicien Dead Insert Coin + English + Nesica Online + All Check OK https://drive.google.com/file/d/1k-dpx-RrH9FXarluLbQQHBBg4QHXf4Uc/view?usp=sharing Merci à @ducon2016 et @line pour l'aide quand je click sur un des liens j ai le message que ton fichier est dans la poubelle donc pas moyen de le telecharger autre question quelqu un peux me uploader ce fichier MAGIDEIO.ini car je na l ai pas et je voudrais l utiliser avec ma manette xbox 3660 merci d avance
Trymado Posted November 30, 2020 Posted November 30, 2020 Le 29/11/2020 à 02:16, JimmyZ a dit : This shows them in trash... can you reshare these? It's up on my seedbox
JimmyZ Posted November 30, 2020 Posted November 30, 2020 5 minutes ago, Trymado said: It's up on my seedbox I think that is what I am missing is the URL for seedbox?
JimmyZ Posted December 5, 2020 Posted December 5, 2020 On 3/7/2020 at 1:48 PM, SuperMagoAlex said: It's super easy, you need: 1 Dolphin bar 1 Wiimote 1 Nunchuck Touchmote software Select the "mode 4" of the dolphin bar, install Touchmote and pair wiimote, in Controller Configuration select "default". Now you'll be able to move the character with the Nunchuck stick and fly pressing the C button. For the magic I use a Leap Motion controller. I did that but the issue right now is that the IO file is setup for WASD for movement... what should that file be set to for the nunchucks to work?
Guest tommiegunz Posted December 5, 2020 Posted December 5, 2020 On 11/30/2020 at 3:33 PM, Trymado said: It's up on my seedbox hey buddy i lost the link to the seedbox can you share it with me again please
Trymado Posted December 5, 2020 Posted December 5, 2020 (edited) il y a 6 minutes, tommiegunz a dit : hey buddy i lost the link to the seedbox can you share it with me again please Edited December 5, 2020 by Trymado
JimmyZ Posted December 17, 2020 Posted December 17, 2020 @SuperMagoAlex or @Trymado What do I have to edit or set in the IO ini file for wii nunchuck to work?
SuperMagoAlex Posted December 18, 2020 Posted December 18, 2020 On 17/12/2020 at 11:07 AM, JimmyZ said: @SuperMagoAlex or @Trymado What do I have to edit or set in the IO ini file for wii nunchuck to work? Hi, this is my ini file. MAGIDEIO.ini
JimmyZ Posted December 19, 2020 Posted December 19, 2020 3 hours ago, SuperMagoAlex said: Hi, this is my ini file. MAGIDEIO.ini Maybe I am missing a step I connected the dolphin bar to PC set mode to 4 I then started the game with the INI file and it doesn't detect the nunchuck.. BUT the WSDA keys work fine.... on my xtension joystick controller
shitoken Posted July 16, 2021 Posted July 16, 2021 This is my setting but coin and esc wont work Quit=Esc Start=1 Test=F1 Service=F2 Coin=5 USBIO Up=Up USBIO Down=Down USBIO Right=Right USBIO Left=Left USBIO Switch1=Left Control USBIO Switch2=Left Alt USBIO Switch3=Space USBIO Switch4=Left Shift USBIO Switch5=z USBIO Switch6=x
shitoken Posted July 18, 2021 Posted July 18, 2021 On 7/17/2021 at 1:01 AM, shitoken said: This is my setting but coin and esc wont work Quit=Esc Start=1 Test=F1 Service=F2 Coin=5 USBIO Up=Up USBIO Down=Down USBIO Right=Right USBIO Left=Left USBIO Switch1=Left Control USBIO Switch2=Left Alt USBIO Switch3=Space USBIO Switch4=Left Shift USBIO Switch5=z USBIO Switch6=x Hi Ducon can you help me to check if these settings are correct? I want to use keyboard
stanleyyeh0205 Posted September 30, 2021 Posted September 30, 2021 (edited) To play this game at 1080p, simply created a short cut to "BppGame-Win64-Shipping" and specify -resx=1920 -resy=1080 Edited September 30, 2021 by stanleyyeh0205 Just added note for everyone.
xtremebuga Posted September 30, 2021 Posted September 30, 2021 On 28/02/2020 at 10:02 PM, Trymado said: Fichier exe patché avec Freeplay + Tous les vérifications de démarage OK + Logo Nesica Online + Anglais Exe file patched with Freeplay + All Boot Check Ok + Nesica Online + English https://drive.google.com/file/d/1c1wfff_Df9COoQKNvPnKiTlFNqOwB5Ls/view?usp=sharing The link is off, please upload it again. Thank you very much in advance.
Trymado Posted October 1, 2021 Posted October 1, 2021 (edited) Il y a 19 heures, xtremebuga a dit : The link is off, please upload it again. Thank you very much in advance. https://pool389.seedbox.fr/files/index.php/s/P5L7zJRKp3dYKQ2?path=%2FMagiciansDead%2FPatch edit: added to 1. Edited October 1, 2021 by 7zxkv 1
Swissychief Posted January 14, 2022 Posted January 14, 2022 Hey does the Nesica Online patch mean that we can now save, or it's just to spoof the server? Otherwise this game is kinda lame to only be able to play a round and then restart...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now