nohero Posted October 16, 2020 Posted October 16, 2020 (edited) 12 ore fa, vitamina ha scritto: start trek voyager i not use this game because don't like sorry but but i think it works the same light gun game set input direct and run with game loader and edit txt in folder sv the setting example teknoparrot version 1.0.0.361 and my light games work with select direct input in TP and run with demulshooter and my solution work : (4 day to work around) Good to know. 11 ore fa, JustinCredible81 ha scritto: I use a Lightgun I would just play HOTD 4 on RCPS3 but I don't know if there's a fix for a Lightgun to emulate the shaking of the move controller that is required to reload and shake zombies off. I wish you could turn that garbage off I have an actual PS3 and Move and it's garbage there too. The shaking feature is not emulated in RPCS3. You can get it using a sixaxis controller like a PS4 one and there's no way to turn off that feature unfortunately. Edited October 16, 2020 by nohero
SuperMagoAlex Posted October 16, 2020 Posted October 16, 2020 On 6/9/2020 at 4:19 PM, nohero said: I made an AHK script for changing the mouse cursor with a custom crosshair Hi nohero can you send me your script? Thx!
nohero Posted October 16, 2020 Posted October 16, 2020 (edited) 3 ore fa, SuperMagoAlex ha scritto: Hi nohero can you send me your script? Thx! Yes, no problem. I will do it later because I'm not at my home right now. EDIT : Check your inbox CHEERs Edited October 16, 2020 by nohero 1
cyrax3 Posted October 17, 2020 Posted October 17, 2020 21 ore fa, nohero ha scritto: Yes, no problem. I will do it later because I'm not at my home right now. EDIT : Check your inbox CHEERs I'm interested too. I find it very useful for those who use dolphinbars. you can send me this script?. thank you
nohero Posted October 17, 2020 Posted October 17, 2020 2 ore fa, cyrax3 ha scritto: I'm interested too. I find it very useful for those who use dolphinbars. you can send me this script?. thank you Check your inbox CHEERs 1
aeliss Posted October 17, 2020 Posted October 17, 2020 (edited) Citation Not sure if it works with a Dolphin bar, and two Nintendo Wii controllers, or "light guns". (I can not check) I can confirm, only 1 dolphin bar and 2 wiimotes, workss perfectly with Touchmote+DemulShooter. Edited October 17, 2020 by aeliss
fwlr Posted October 23, 2020 Posted October 23, 2020 TeknoParrot 1.0.0.437 works fine with mouse input and full screen. For Player 1 Light Gun I had to select Windows Mouse Cursor instead of my actual mouse. Still have some graphical issues with nvidia card like mentioned at beginning, and shaderfix does not solve.
susoarkangel Posted October 26, 2020 Posted October 26, 2020 Hi nohero can you send me your script? Thx! 1
SuperMagoAlex Posted October 26, 2020 Posted October 26, 2020 8 hours ago, susoarkangel said: Hi nohero can you send me your script? Thx! It's useless to quote him, he left us for sure, avatar changed, no infos in his account page and impossible to send him private messages. 1
fwlr Posted October 27, 2020 Posted October 27, 2020 (edited) Everything working in latest TeknoParrot 437 when using mouse and raw input. What exactly is needed to get custom cursor? I downloaded a CrossHair.cur I placed in disk0\elf and also tried disk0\elf\sv I tried launching MouseFix 1.0.1 as admin to see if that works, but doesn't, and I'm assuming this is the problem because it was made for earlier version of Teknoparrot. Edited October 27, 2020 by fwlr
ISOHaven Posted October 27, 2020 Posted October 27, 2020 3 hours ago, fwlr said: Everything working in latest TeknoParrot 437 when using mouse and raw input. What exactly is needed to get custom cursor? I downloaded a CrossHair.cur I placed in disk0\elf and also tried disk0\elf\sv I tried launching MouseFix 1.0.1 as admin to see if that works, but doesn't, and I'm assuming this is the problem because it was made for earlier version of Teknoparrot. Here's my ReadMe for it. I followed these on a brand new Win10 2004 machine. Still worked fine. Extract main game into folder of choice. Main game path - disk0\elf Impliment Update C Impliment crosshair Impliment missing test menu files Impliment shader fix From within "HOTD4 game.exe for Game Loader All RH.rar" pick a resolution file. This is a pain, for my 4k monitor I had to pick 1080 in order for the bullets to hit my crosshair and have the game centered fullscreen. Setup game in TeknoParrot Executable - disk0\elf\hod4M.elf Select FreePlay, OffScreenReloadHack and UseMouseForGun. Extract executables from "Game Loader All RH 344.7z" into elf folder and run the config app. Windows Size Tab - Monitor Resolution - Input 1920x1080 and click enable. I'm guesing this must match the executable resolution. Update Rate Tab - Update rate Mouse Cursor Hide - Uncheck Enable. Loader Settings 1 Tab - Make sure it's properly pointing to TeknoParrot. Load game with "Game Loader All RH.exe" Left Click - Fire Middle Click - Grenade Right click - Reload
JustinCredible81 Posted October 27, 2020 Posted October 27, 2020 I wonder if the graphics problems during cutscenes will ever be fixed. rpcs3 version works fine, but you can't shake your lightgun like a move controller which is required to reload and shove zombies off. So there's no perfect way to play this with a lightgun on PC right now.
fwlr Posted October 28, 2020 Posted October 28, 2020 3 hours ago, ISOHaven said: Here's my ReadMe for it. I followed these on a brand new Win10 2004 machine. Still worked fine. Extract main game into folder of choice. Main game path - disk0\elf Impliment Update C Impliment crosshair Impliment missing test menu files Impliment shader fix From within "HOTD4 game.exe for Game Loader All RH.rar" pick a resolution file. This is a pain, for my 4k monitor I had to pick 1080 in order for the bullets to hit my crosshair and have the game centered fullscreen. Setup game in TeknoParrot Executable - disk0\elf\hod4M.elf Select FreePlay, OffScreenReloadHack and UseMouseForGun. Extract executables from "Game Loader All RH 344.7z" into elf folder and run the config app. Windows Size Tab - Monitor Resolution - Input 1920x1080 and click enable. I'm guesing this must match the executable resolution. Update Rate Tab - Update rate Mouse Cursor Hide - Uncheck Enable. Loader Settings 1 Tab - Make sure it's properly pointing to TeknoParrot. Load game with "Game Loader All RH.exe" Left Click - Fire Middle Click - Grenade Right click - Reload Thanks. I did the first part, The game plays fine without Game Loader so I was hoping not to use it. So Game Loader All RH is needed to add CrossHair.cur?
fwlr Posted October 28, 2020 Posted October 28, 2020 3 hours ago, JustinCredible81 said: I wonder if the graphics problems during cutscenes will ever be fixed. rpcs3 version works fine, but you can't shake your lightgun like a move controller which is required to reload and shove zombies off. So there's no perfect way to play this with a lightgun on PC right now. I like the rpcs3 version, except what you mention. Hopefully they can implement true Move functionality someday. But even on real hardware the Move controller didn't work very well for shake.
JustinCredible81 Posted October 28, 2020 Posted October 28, 2020 3 minutes ago, fwlr said: I like the rpcs3 version, except what you mention. Hopefully they can implement true Move functionality someday. But even on real hardware the Move controller didn't work very well for shake. Yeah I have a CFW PS3 and Move, just trying to get all arcade type games on PC. I prefer my lightgun on PC over Move anyday.
ISOHaven Posted October 28, 2020 Posted October 28, 2020 17 hours ago, fwlr said: Thanks. I did the first part, The game plays fine without Game Loader so I was hoping not to use it. So Game Loader All RH is needed to add CrossHair.cur? Well, mind you this was a long time ago. Back then this was the only way I could get the game to work "well". TP has obviously advanced since then. So no, this is not definitive. However it still worked well for me today....er yesterday.
EncryptedMind Posted October 31, 2020 Posted October 31, 2020 CAN anyone help me. Ive seen it posted somewhere but i cant find it now. When I run HOD4 for instance the screen is way to big for the tv and i cant see everything. Im running 1920 x 1080. on windows 7 64 bit with 750ti nvidia card. Straight from teknoparrot 1.0.0.447
JustinCredible81 Posted October 31, 2020 Posted October 31, 2020 (edited) 1 hour ago, EncryptedMind said: CAN anyone help me. Ive seen it posted somewhere but i cant find it now. When I run HOD4 for instance the screen is way to big for the tv and i cant see everything. Im running 1920 x 1080. on windows 7 64 bit with 750ti nvidia card. Straight from teknoparrot 1.0.0.447 Try right clicking the .exe of the game (not Teknoparrot) select properties > compatibility > change high DPI settings > and click the bottom one "override high DPI scaling behavior scaling performed by" and leave it on application. Edited October 31, 2020 by JustinCredible81
EncryptedMind Posted November 1, 2020 Posted November 1, 2020 (edited) 18 hours ago, JustinCredible81 said: Try right clicking the .exe of the game (not Teknoparrot) select properties > compatibility > change high DPI settings > and click the bottom one "override high DPI scaling behavior scaling performed by" and leave it on application. Ok i got it to work now thanks. I had to right click on teknoparrotUI. Thanks so much. Edited November 1, 2020 by EncryptedMind
erdoboy43 Posted November 5, 2020 Posted November 5, 2020 On 06/09/2020 at 3:19 PM, nohero said: I made an AHK script for changing the mouse cursor with a custom crosshair A little video : This script can be adapted to other emulators like Demul ( I used it time ago for many Naomi shooting games ). I did it because I'm using a xbox controller and that script helps to have a crosshair instead of the mouse cursor, that's it. CHEERs Could i have a copy of this script please? Much appreciated. Thank you
Deflep Posted November 18, 2020 Posted November 18, 2020 hello 1st post here a newbe, I'm struggling to get hotd4 running. When I launch it through Teknoparrot UI 1.0.0.482, the black screen comes up runs through some messages and then ends on: Initialization Complete amLibInit: cannot open /proc/bus/pci/00/if.0 The game then exits back to the UI. Please Help
dlburge1 Posted November 19, 2020 Posted November 19, 2020 Any idea how to fix this been trying for hours
cristiano1987 Posted November 19, 2020 Posted November 19, 2020 Hi everyone I have two aimtraks, is there a way to enable the second player? With enable mouse olny the first player worked Best regards
Guest petje Posted November 19, 2020 Posted November 19, 2020 2 hours ago, cristiano1987 said: is there a way to enable the second player? Did you do this ? Enable second player. Just open the .elf file with any HEX editor, go to file offset 0x2D5827 and replace 0x74 by 0xEB That's all Thanks to @argonlefou No, this will not work with two mice connected ! Not sure if it works with a Dolphin bar, and two Nintendo Wii controllers, or "light guns". (I can not check)
Guest petje Posted November 19, 2020 Posted November 19, 2020 Maybe "soon" support for 2 mice for Sega Ring games https://imgshare.io/image/rawinput2.NJbEA4
Houb Posted November 20, 2020 Posted November 20, 2020 Any solution to get crosshairs using joysticks or keyboard with this game?
as81 Posted November 23, 2020 Posted November 23, 2020 On 2/24/2019 at 5:14 AM, linglang said: This procedure is probably not needed anymore since Teknoparrot 1.0.0.140 !!! According to the changelog: - [Reaver] [TeknoParrot] House of the Dead 4 now has the hidden cursor. - [Reaver] [TeknoParrot] The House of the Dead 4 now throws grenades with the mouse 3. Still does not work ? You want to add your own cursors ? Keep reading. House Of The Dead 4 (Lindbergh) Works fine on Window$ 10 (1803) and TeknoParrot 1.86 (straight loaded) I run it with GameLoader (0.3.2.7) and TeknoParrot 1.81 X-MAS Special. Run HOTD4_MouseFix.exe as administrator. Run GameLoader All RH as administrator. Edit 14-02-2019 The fault in "version 1" of these instructions was: I forgot to mention, Run HOTD4_MouseFix.exe as administor. Run Gameloader All RH.exe as administrator. I got House Of The Dead 4 working with Gameloader All RH ! DOES NOT RUN CORRECTLY ON 1.88 or higher. (as far as I know, just tested it on version 1.90 no go ! So run 1.81 X-MAS Special ! Just played it to the "end", "James", I won't spoil it .... I can get it to work with the mouse ,crosshair, dead centre. I have no idea how to configure it for a second player, second mouse on 1 system. At the moment, I can connect a second mouse to the PC, Ds_Diag sees it as a second device. But in game, both mice, control the player 1 crosshair. And I am missing the sound effects of the guns and zombies. There is only music and dialogue. OK, here is my documentation to get it working. I use a three button mouse a keyboard and a wireless XBox 360 controller, to get the mouse working to aim, shoot, reload and throw grenades. It should also be possible with only a keyboard and mouse, use Direct Input in TeknoParrot Emulation settings. For Xbox 360 controller input use XInput in TeknoParrot Emulation settings. Disable the headphone outputs of the Xbox 360 controllers in Window$ 10. Set the default output to the correct audio output device. https://www.youtube.com/watch?v=YWX4WxMkDxk Otherwise the Xbox 360 controllers switch the audio output to their headphone outputs everytime. Extract the HODT4 .bin file with 7zip or PowerISO https://www.7-zip.org/https://www.poweriso.com/ Then you need these files. Characters look corrupted ? Use the shader fix files, place in HOD4/disk0/fshttp://www.emuline.org/applications/core/interface/file/attachment.php?id=4729 Files needed for the test menu, place in HOD4/disk0/elf (HOD4/disk0/elf/hod4testM_HD.elf)http://www.emuline.org/applications/core/interface/file/attachment.php?id=4730 GameLoader All RH, place the three .exe files in HOD4/disk0/elf/https://mega.nz/#!4l0EFSDZ!So_xejXzSQEjDaqs6eeSaMW5TYC85jPPlRIzlXdGcGk Enable second player. Just open the .elf file with any HEX editor, go to file offset 0x2D5827 and replace 0x74 by 0xEB That's all Thanks to @argonlefou No, this will not work with two mice connected ! Not sure if it works with a Dolphin bar, and two Nintendo Wii controllers, or "light guns". (I can not check) Warning about "virus" ? (before version 0.3.2.4) Edit the file TTX.ini in C:\Users\"Your User Name"\ AppData\Roaming\Game Loader All RH\ And change Warning = Agree Seeing green version number of Gamleoader All RH at bottom of screen ? Edit the file setting.ini in C:\Users\"Your User Name"\AppData\Roaming\Game Loader All RH and change: [FileVersion] Show=0 Different resolution hod4M.elf files, place in HOD4/disk0/elf/ Use the one needed for the native resolution of your monitor / TV.http://www.mediafire.com/file/37k3y387vjwgm7u/2+-+HOTD4+game.exe+for+Game+Loader+All+RH.rar Read the readme.txt files included in the compressed files ! Out of this thread, thanks to 7zxkv. First open 2 - HOTD4 game.exe for Game Loader All RH with 7Zip. In your HOD4/disk0/elf folder change the extension of you original hod4M.elf to hod4M.elfo Can not see extensions of your files ? https://www.thewindowsclub.com/show-file-extensions-in-windows Drag the correct resolution hod4M.elf from 7Zip into your HOD4/disk0/elf folder. Choose the one with the correct native resolution for your monitor. For the Gameloader All RH to work, you must: 1. Put the 3 exe in the folder of a game, in this case, HOD4/disk0/elf 2. Launch the Game Loader Installer.exe file (do it once) You will get a Virus warning to see, FAKE !! (Old news, not anymore since version 0.3.2.3 of GameLoader ALL RH) 3. Go to C: \ Users \ USER NAME \ AppData \ Roaming \ Game Loader All RH \ TTX.ini 4. Edit TTX.ini and change the line [Ignore] Warning= Agree 5. Run Game Loader Installer.exe once again, and install the necesary files 6. Run the Game Loader Config.exe file, follow the instructions in the video below On to the next step. This video shows how to config GameLoader All RH for HOTD4.https://www.youtube.com/watch?v=7lSFvzd4pfc HOTD4_MouseFix.zip can be found here, place in HOD4/disk0/elf/http://forum.arcadecontrols.com/index.php/topic,149714.msg1674784.html#msg1674784 Updated version thanks to @argonlefou Somebody asked me to update the HOD4_mouseFix to play with the latest version of TP with enhanced resolution, so as I updated DemulShooter latelly, here it is : Tested with: TeknoParrotUI - 1.0.0.226 Ope nParrotWin32 - 1.0.0.93 OpenParrotx64 - 1.0.0.93 OpenSegaAPI - 1.0.0.118 TeknoParrot - 1.0.0.17 HOTD_MouseFix_v1.0.1.zip "HOTD4_MouseFix.exe" can be start minimalized in the task bar by running the command : "HOTD4_MouseFix.exe -minimized". Crosshair mouse cursors can be found here.http://www.rw-designer.com/gallery?search=crosshair+cursors&by=new The filename has to be CrossHair.cur This file needs to be installed in disk0/elf/sv Onto the next step. In Game Loader Config on the Update rate Tab, uncheck Update rate mouse cursor hide. On the Loader Settings 1 Tab, click on Select Folder, and link it to your TeknoParrot folder location. This should start TeknoParrot. 1. In TeknoParrot go to "EMULATION SETTINGS" and uncheck "Use Mouse for gun Games". That way you can set whatever keyboard key you want for START, TEST and SERVICE. 2. Go to HOTD4 game settings, set your START, TEST, SERVICE keys in "input Mapping" and check "General - OffscreenReload Hack". Others options are not important so do as you wish. 3. Make sure you link the correct path to hod4M.elf in TeknoParrot. .....\HOD4\disk0\elf\hod4M.elf for game mode. ......\HOD4\disk0\elf\hod4testM_HD.elf for testmode. 4. Now just run "HOTD4_MouseFix.exe" before starting the game. "HOTD4_MouseFix.exe" can be start minimalized in the task bar by running the command : "HOTD4_MouseFix.exe -minimized". Configure your game settings in TeknoParrot for House Of The Dead 4. Onto the next step. Demulshooter: https://github.com/argonlefou/DemulShooter/releases DemulShooter needs. .NET 3.5 (includes .NET 2.0 and 3.0) https://docs.microsoft.com/en-us/dotnet/framework/install/dotnet-35-windows-10 Do you get error 0x800f081f, like I did ? Here is the solution. https://www.youtube.com/watch?v=ZHQqb7IOHZE https://androidfilehost.com/?fid=1322778262904003837 Copy the file microsoft-windows-netfx3-ondemand-package.cab to the root of C: At the Command prompt (run as admin) paste this text, it will install .NET 3.5 if you have error 0x800f081f Dism.exe /online /enable-feature /featurename:NetFX3 /source:C:\ /LimitAccess DOES NOT RUN CORRECTLY ON 1.88 or higher ! So run 1.81 X-MAS Special ! My settings which work for me, on window$ 10 1803 (April) revision, and TeknoParrot 1.81 XMAS Special, XInput joysticks. https://ibb.co/MM9RpzHhttps://ibb.co/NVfFP9Phttps://ibb.co/tJXYvf0https://ibb.co/HhSM66vhttps://ibb.co/vDrd2pLhttps://ibb.co/7vd9C0thttps://ibb.co/Y7y6xMXhttps://ibb.co/xmLm4rVhttps://ibb.co/Y2SbBsFhttps://ibb.co/2Z3BKgchttps://ibb.co/3mq6m8ghttps://ibb.co/Z29118Yhttps://ibb.co/RSXDrrzhttps://ibb.co/34zSNMf Onto the next step. TeknoParrot still shows the Window$ mouse cursor ? You can use GameLoader All RH (0.3.X.X) in conjunction with TeknoParrot (1.93 any version above) to suppress the Window$ mouse cursor. "Update rate mouse cursor hide", enable and set to 0. https://ibb.co/BjNLTxJhttps://ibb.co/dGnHxKH Onto the next step. This step is probably optional ! Demulshooter 8.5.2 can be found here. http://forum.arcadecontrols.com/index.php/topic,149714.msg1674095.html#msg1674095 Here is the DemulShooter Wiki.https://github.com/argonlefou/DemulShooter/wiki I extracted the DemulShooter files in HOD4/disk0/elf Launch Ds_Diag.exe and change, select a device at the top, it should be your Xbox 360 controller. Move your mouse it should change the raw input values, test your mouse buttons. In DemulShooter choose your P1 Device, it should be your Xbox 360 controller. On to the next steps. 7. Launch HOTD4_MouseFix.exe as administrator. 8. Launch Game Loader All RH.exe as administrator. Wait a few moments, you get a black screen, with green v0.3.2.4 at the bottom. Patients ...... Right mouse click is start or 1 on keyboard, or start on the joystick ? Enjoy !! I hope that this tutorial helps other people out. It takes you a few moments to read, but it took me all night to figure it out. When you get the game working, thanks to this "manual", please give a thanks at this post. And a BIG thanks for the people who originally uploaded the games, we all can enjoy (if you do it right) !!! And of course all the people involved in, the game loaders and JVS I/O emulation applications we use, and all the people I "forgot". Also look at the posts below, some members / people add helpful information, thank them also ..... thank you.. so much.. definitely it works! .. for teknoparrot user, just skip the 7 and 8 steps, launch teknoparrot then play the game there
otomon Posted November 26, 2020 Posted November 26, 2020 (edited) Came here from another topic you posted a link to this from... I am trying to get another game Elevator Action Death Parade to show cursor (so the reverse of what you mention on op), I got a folder called sv in the main folder of the game, and the cursor file is in there... -Running the game with Jconfig set to enable mouse makes it so I can actually play the game, no cursor tho.... -If I disable mouse on Jconfig and run Demulshooter shortcut,it shows cursor but I can only shoot on the top left no matter where my cursor is (also wont show the crosshair from sv) Any idea what I could be doing wrong? Game Loader is not set to hide mouse Edited November 26, 2020 by otomon
moondrop Posted December 15, 2020 Posted December 15, 2020 (edited) I can't select scenario roots between A and B (left and right). Nothing happens when I put cursor on the selection and clicking. Anyone solve this problem? Edited December 15, 2020 by moondrop
anfdhwlddj Posted December 16, 2020 Posted December 16, 2020 14 hours ago, moondrop said: I can't select scenario roots between A and B (left and right). Nothing happens when I put cursor on the selection and clicking. Anyone solve this problem? Did you run the game as full-screen mode? I couldn't select path when I run this game in full-screen mode. I solved this problem through run THOTD4 as a windowed-mode. after that, It was worked path select.
Zebra Posted January 31, 2021 Posted January 31, 2021 Is there any way to use guns that output like analog controllers in Windows with HOD4 yet? I use a USB2Gun board for real light guns and I have various positional and IR arcade guns connected via a UHID and an Apac. All of the above output like HID analog controllers but Demul Shooter only works with guns that output as a mouse. When you try to use analog controllers in Teknoparrot it converts it to relative positioning. That's fine if you are using an Xbox360 pad but not for a gun. I need absolute analog positioning to use my arcade guns...
Guest Bootleg Posted February 8, 2021 Posted February 8, 2021 Update Rev A to Rev C (final): https://mega.nz/#F!cQ0FDKKZ!PiYhaPpXjE7yhgTpA7-0hA this down?
Guest R.R.Z. Posted February 8, 2021 Posted February 8, 2021 6 minutes ago, Bootleg said: Update Rev A to Rev C (final): https://mega.nz/#F!cQ0FDKKZ!PiYhaPpXjE7yhgTpA7-0hA this down? You have it also on the section of patches of trymado
Guest Bootleg Posted February 8, 2021 Posted February 8, 2021 Just now, R.R.Z. said: You have it also on the section of patches of trymado thanks alot! =)
farhanpx Posted March 1, 2021 Posted March 1, 2021 (edited) Please, somebody tell me what are the file names of custom crosshair files (P1,P2) to put in teknoparrot folder? Edited March 1, 2021 by farhanpx
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now