Guest linglang Posted February 23, 2019 Share Posted February 23, 2019 (edited) This procedure is probably not needed anymore since Teknoparrot 184.108.40.206 !!! According to the changelog: - [Reaver] [TeknoParrot] House of the Dead 4 now has the hidden cursor. - [Reaver] [TeknoParrot] The House of the Dead 4 now throws grenades with the mouse 3. Still does not work ? You want to add your own cursors ? Keep reading. House Of The Dead 4 (Lindbergh) Works fine on Window$ 10 (1803) and TeknoParrot 1.86 (straight loaded) I run it with GameLoader (0.3.2.7) and TeknoParrot 1.81 X-MAS Special. Run HOTD4_MouseFix.exe as administrator. Run GameLoader All RH as administrator. Edit 14-02-2019 The fault in "version 1" of these instructions was: I forgot to mention, Run HOTD4_MouseFix.exe as administor. Run Gameloader All RH.exe as administrator. I got House Of The Dead 4 working with Gameloader All RH ! DOES NOT RUN CORRECTLY ON 1.88 or higher. (as far as I know, just tested it on version 1.90 no go ! So run 1.81 X-MAS Special ! Just played it to the "end", "James", I won't spoil it .... I can get it to work with the mouse ,crosshair, dead centre. I have no idea how to configure it for a second player, second mouse on 1 system. At the moment, I can connect a second mouse to the PC, Ds_Diag sees it as a second device. But in game, both mice, control the player 1 crosshair. And I am missing the sound effects of the guns and zombies. There is only music and dialogue. OK, here is my documentation to get it working. I use a three button mouse a keyboard and a wireless XBox 360 controller, to get the mouse working to aim, shoot, reload and throw grenades. It should also be possible with only a keyboard and mouse, use Direct Input in TeknoParrot Emulation settings. For Xbox 360 controller input use XInput in TeknoParrot Emulation settings. Disable the headphone outputs of the Xbox 360 controllers in Window$ 10. Set the default output to the correct audio output device. https://www.youtube.com/watch?v=YWX4WxMkDxk Otherwise the Xbox 360 controllers switch the audio output to their headphone outputs everytime. Extract the HODT4 .bin file with 7zip or PowerISO https://www.7-zip.org/https://www.poweriso.com/ Then you need these files. Characters look corrupted ? Use the shader fix files, place in HOD4/disk0/fshttp://www.emuline.org/applications/core/interface/file/attachment.php?id=4729 Files needed for the test menu, place in HOD4/disk0/elf (HOD4/disk0/elf/hod4testM_HD.elf)http://www.emuline.org/applications/core/interface/file/attachment.php?id=4730 GameLoader All RH, place the three .exe files in HOD4/disk0/elf/https://mega.nz/#!4l0EFSDZ!So_xejXzSQEjDaqs6eeSaMW5TYC85jPPlRIzlXdGcGk Enable second player. Just open the .elf file with any HEX editor, go to file offset 0x2D5827 and replace 0x74 by 0xEB That's all Thanks to @argonlefou No, this will not work with two mice connected ! Not sure if it works with a Dolphin bar, and two Nintendo Wii controllers, or "light guns". (I can not check) Warning about "virus" ? (before version 0.3.2.4) Edit the file TTX.ini in C:\Users\"Your User Name"\ AppData\Roaming\Game Loader All RH\ And change Warning = Agree Seeing green version number of Gamleoader All RH at bottom of screen ? Edit the file setting.ini in C:\Users\"Your User Name"\AppData\Roaming\Game Loader All RH and change: [FileVersion] Show=0 Different resolution hod4M.elf files, place in HOD4/disk0/elf/ Use the one needed for the native resolution of your monitor / TV.http://www.mediafire.com/file/37k3y387vjwgm7u/2+-+HOTD4+game.exe+for+Game+Loader+All+RH.rar Read the readme.txt files included in the compressed files ! Out of this thread, thanks to 7zxkv. First open 2 - HOTD4 game.exe for Game Loader All RH with 7Zip. In your HOD4/disk0/elf folder change the extension of you original hod4M.elf to hod4M.elfo Can not see extensions of your files ? https://www.thewindowsclub.com/show-file-extensions-in-windows Drag the correct resolution hod4M.elf from 7Zip into your HOD4/disk0/elf folder. Choose the one with the correct native resolution for your monitor. For the Gameloader All RH to work, you must: 1. Put the 3 exe in the folder of a game, in this case, HOD4/disk0/elf 2. Launch the Game Loader Installer.exe file (do it once) You will get a Virus warning to see, FAKE !! (Old news, not anymore since version 0.3.2.3 of GameLoader ALL RH) 3. Go to C: \ Users \ USER NAME \ AppData \ Roaming \ Game Loader All RH \ TTX.ini 4. Edit TTX.ini and change the line [Ignore] Warning= Agree 5. Run Game Loader Installer.exe once again, and install the necesary files 6. Run the Game Loader Config.exe file, follow the instructions in the video below On to the next step. This video shows how to config GameLoader All RH for HOTD4.https://www.youtube.com/watch?v=7lSFvzd4pfc HOTD4_MouseFix.zip can be found here, place in HOD4/disk0/elf/http://forum.arcadecontrols.com/index.php/topic,149714.msg1674784.html#msg1674784 Updated version thanks to @argonlefou Somebody asked me to update the HOD4_mouseFix to play with the latest version of TP with enhanced resolution, so as I updated DemulShooter latelly, here it is : Tested with: TeknoParrotUI - 220.127.116.11 Ope nParrotWin32 - 18.104.22.168 OpenParrotx64 - 22.214.171.124 OpenSegaAPI - 126.96.36.199 TeknoParrot - 188.8.131.52 HOTD_MouseFix_v1.0.1.zip "HOTD4_MouseFix.exe" can be start minimalized in the task bar by running the command : "HOTD4_MouseFix.exe -minimized". Crosshair mouse cursors can be found here.http://www.rw-designer.com/gallery?search=crosshair+cursors&by=new The filename has to be CrossHair.cur This file needs to be installed in disk0/elf/sv Onto the next step. In Game Loader Config on the Update rate Tab, uncheck Update rate mouse cursor hide. On the Loader Settings 1 Tab, click on Select Folder, and link it to your TeknoParrot folder location. This should start TeknoParrot. 1. In TeknoParrot go to "EMULATION SETTINGS" and uncheck "Use Mouse for gun Games". That way you can set whatever keyboard key you want for START, TEST and SERVICE. 2. Go to HOTD4 game settings, set your START, TEST, SERVICE keys in "input Mapping" and check "General - OffscreenReload Hack". Others options are not important so do as you wish. 3. Make sure you link the correct path to hod4M.elf in TeknoParrot. .....\HOD4\disk0\elf\hod4M.elf for game mode. ......\HOD4\disk0\elf\hod4testM_HD.elf for testmode. 4. Now just run "HOTD4_MouseFix.exe" before starting the game. "HOTD4_MouseFix.exe" can be start minimalized in the task bar by running the command : "HOTD4_MouseFix.exe -minimized". Configure your game settings in TeknoParrot for House Of The Dead 4. Onto the next step. Demulshooter: https://github.com/argonlefou/DemulShooter/releases DemulShooter needs. .NET 3.5 (includes .NET 2.0 and 3.0) https://docs.microsoft.com/en-us/dotnet/framework/install/dotnet-35-windows-10 Do you get error 0x800f081f, like I did ? Here is the solution. https://www.youtube.com/watch?v=ZHQqb7IOHZE https://androidfilehost.com/?fid=1322778262904003837 Copy the file microsoft-windows-netfx3-ondemand-package.cab to the root of C: At the Command prompt (run as admin) paste this text, it will install .NET 3.5 if you have error 0x800f081f Dism.exe /online /enable-feature /featurename:NetFX3 /source:C:\ /LimitAccess DOES NOT RUN CORRECTLY ON 1.88 or higher ! So run 1.81 X-MAS Special ! My settings which work for me, on window$ 10 1803 (April) revision, and TeknoParrot 1.81 XMAS Special, XInput joysticks. https://ibb.co/MM9RpzHhttps://ibb.co/NVfFP9Phttps://ibb.co/tJXYvf0https://ibb.co/HhSM66vhttps://ibb.co/vDrd2pLhttps://ibb.co/7vd9C0thttps://ibb.co/Y7y6xMXhttps://ibb.co/xmLm4rVhttps://ibb.co/Y2SbBsFhttps://ibb.co/2Z3BKgchttps://ibb.co/3mq6m8ghttps://ibb.co/Z29118Yhttps://ibb.co/RSXDrrzhttps://ibb.co/34zSNMf Onto the next step. TeknoParrot still shows the Window$ mouse cursor ? You can use GameLoader All RH (0.3.X.X) in conjunction with TeknoParrot (1.93 any version above) to suppress the Window$ mouse cursor. "Update rate mouse cursor hide", enable and set to 0. https://ibb.co/BjNLTxJhttps://ibb.co/dGnHxKH Onto the next step. This step is probably optional ! Demulshooter 8.5.2 can be found here. http://forum.arcadecontrols.com/index.php/topic,149714.msg1674095.html#msg1674095 Here is the DemulShooter Wiki.https://github.com/argonlefou/DemulShooter/wiki I extracted the DemulShooter files in HOD4/disk0/elf Launch Ds_Diag.exe and change, select a device at the top, it should be your Xbox 360 controller. Move your mouse it should change the raw input values, test your mouse buttons. In DemulShooter choose your P1 Device, it should be your Xbox 360 controller. On to the next steps. 7. Launch HOTD4_MouseFix.exe as administrator. 8. Launch Game Loader All RH.exe as administrator. Wait a few moments, you get a black screen, with green v0.3.2.4 at the bottom. Patients ...... Right mouse click is start or 1 on keyboard, or start on the joystick ? Enjoy !! I hope that this tutorial helps other people out. It takes you a few moments to read, but it took me all night to figure it out. When you get the game working, thanks to this "manual", please give a thanks at this post. And a BIG thanks for the people who originally uploaded the games, we all can enjoy (if you do it right) !!! And of course all the people involved in, the game loaders and JVS I/O emulation applications we use, and all the people I "forgot". Also look at the posts below, some members / people add helpful information, thank them also ..... Edited October 22, 2019 by linglang proof read, added info, added link demulshooter , what is start button ? Enable second player. Link to comment Share on other sites More sharing options...
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!Register a new account
Already have an account? Sign in here.Sign In Now