MAME 0.287 & clones : Multiple Arcade Machine Emulator

[CiTrON]

😂

[MyGames]

Hello people, new MAME .286 special build for you because this site has given me a lot of good stuff so this is my contribution, my way to thank you all.

*DSP QSound Enabled (includes the games that make use of it so just download and play)
*Ultimate Mortal Kombat 3 Wavenet Edition (included)
*Clockwork Aquario  (included)
*Akai Katana (included)
*Dodonpachi Saidaioujou (included)
*Command File also added so you have the moves for every character in every game
*History File

To play as Noob Saibot in UMK3 Wavenet you have to choose Kano then keep pressed Back, High Punch, Low Punch, Low Kick and Block until the match starts, in the default keyboard config is Left Arrow, Left Shift, Z, Left Ctrl, Left Alt

 

https://www.mediafire.com/file/hjx7013uhk4q6gz/MAME_.286.zip/file

 

[ducon2016]

2 hours ago, MyGames said:

Hello people, new MAME .286 special build for you because this site has given me a lot of good stuff so this is my contribution, my way to thank you all.

*DSP QSound Enabled (includes the games that make use of it so just download and play)
*Ultimate Mortal Kombat 3 Wavenet Edition (included)
*Clockwork Aquario  (included)
*Akai Katana (included)
*Dodonpachi Saidaioujou (included)
*Command File also added so you have the moves for every character in every game
*History File

To play as Noob Saibot in UMK3 Wavenet you have to choose Kano then keep pressed Back, High Punch, Low Punch, Low Kick and Block until the match starts, in the default keyboard config is Left Arrow, Left Shift, Z, Left Ctrl, Left Alt

 

https://www.mediafire.com/file/hjx7013uhk4q6gz/MAME_.286.zip/file

 

 

Great work but your download is over 1GB. 

[hippopippo]

Mame 0.286 NONAG *FULLSET* supa-dupa-release (plus all extras added in 0.283) 

 

FIXED NONAG (02-03-2026)

 

https://www.mediafire.com/file/9rvv4y9r45ytduk/mame0286-nonag-full.7z/file

Modifié le 2 mars par hippopippo

[Rhyader]

Con questo nuovo no nag ho ugualmente il warning, cambia solo che é in finestra arancione anziché gialla: cosa ho sbagliato?

 

[hippopippo]

sorry my bad, re-upping fixed 0.286 on same post (eta 1 hr recompiling)

 

-- new build added --

Modifié le 2 mars par hippopippo

[ultimatepump]

Where is the supa dupa set?

[hippopippo]

You still asking same question every build : seek special roms yourself, it’s not that hard and someone posted’em already on this thread. 

[ultimatepump]

By the title I thought it was a cleaned set, not a MAME build that filters.   I know and do have all sets of all systems.

[hippopippo]

my build doesn't filter anything, it contains the entire mame set plus the disabled roms and other extra additions (No Nag Screen) :

 

- Ketsui: Kizuna Jigoku Tachi (IKD 2007 SPECIAL (2007 CAVE MATSURI VER.)
- Ketsui: Kizuna Jigoku Tachi (2012/04/17 BACK. VER) 
- ESPGaluda -savefix ver-
- Ketsui -savefix ver- 
- Akai Katana (2010/ 8/13 MASTER VER.)
- DoDonPachi SaiDaiOuJou (2012/ 4/20)
- Clockwork Aquario
- Donkey Kong Halloween Spooky Remix 
- Donkey Kong Christmas Tournament Edition
- Donkey Kong Christmas Remix 

 

it was enough to read the previous versions.

[ultimatepump]

I have the full set but where is your version set?  I only see an executable.

[hippopippo]

Oh Jesus .. I can't do it, I'll pass.

Wolfy, you try, maybe you're a better communicator than me.

[jcstahl1]

1 hour ago, ultimatepump said:

I have the full set but where is your version set?  I only see an executable.

he's trying to say that it's a special build of mame 286 with the full set enabled including the missing cave games, the other games that have been listed, and no nag screen that are not built into the vanilla mame exe.  there are no roms/chds included.   

[ultimatepump]

Ok fine, thanks.  The words "fullset" usually mean a romset. 

 

I don't know why you are do upset and frustrated.   Just say you made a version of MAME that has those features.  

 

"Mame 0.286 NONAG *FULLSET* supa-dupa-release (plus all extras added in 0.283) "  immediately says "romset".  Not a big deal. Just miscommunication. 

[fire10]

Quick question guys, is it possible to make a groovymame version of this?

[mono20]

nuevo roms the Eye of the Typhoon 

[hippopippo]

Mame 0.287 NONAG  supa-dupa-release (plus all extras supported in 0.283) 

 

https://www.mediafire.com/file/lal3yhz8aoyro5y/mame0287-nonag-full.7z/file

[ducon2016]

3 hours ago, hippopippo said:

Mame 0.287 NONAG  supa-dupa-release (plus all extras supported in 0.283) 

 

https://www.mediafire.com/file/lal3yhz8aoyro5y/mame0287-nonag-full.7z/file

 

Thanks. This is my favorite version of Mame. Keep the good work!

[hippopippo]

A while ago, I started testing Area 51 Site 4 for MAME (v1.0) using a special fork for that game. Today, after many months, I've added some modifications to speed up a system from the dinosaur era that's poorly supported by MAME.

I'd ask you to kindly run some tests on high-performance PCs to get some feedback and move this game forward (the controls are fully playable).

 

Thank you.

 

PS: Use and test ONLY from the attached pre-configured and calibrated archive, do not mix it with your pre-installed mame.

 

 

https://www.mediafire.com/file/8ncstpsv5aqx0zk/area51s4_v1.1.7z/file

[dyniel83]

Hi Hippo,

Tested on Ryzen 5 9600X, Win11, 32GB Ram 

 

The game shows a constant 100% speed, and when I run it without limits it goes up to 200%. However, the actual gameplay is noticeably slower than normal, and you can hear lag in the sound effects. If I had to guess, it feels like it’s running at around 50% of the intended speed when frame rate limiting is enabled.

 

When I run it without limits and it drops from 200% to around 150%, it actually feels like normal speed

[hippopippo]

Thanks, I see you have a nice and powerful CPU, now do same test by activating these parameters please :

 

[miki91]

for update jurassik park? firmware viper work ?

[Rhyader]

Hi, I have a i7 10700k. About "area 51 site 4", if I choose d3d, I get an error message: failed to initialize d3d9 but I dwnloaded and installed all d3d runtimes.

[dyniel83]

I tested Area51 with the settings you recommended, and it looks like I can’t use Direct3D in MAME. I’m getting an “Unable to initialize Direct3D 9” error, even though I have the full DirectX package installed, including DirectX 9.

 

All the other settings are the same, and I can see improvements when using OpenGL.

 

Short video: https://ufile.io/glyvz8hr

 

FYI: I’ve sent you a DM on Discord in case that’s easier to follow up

[Rhyader]

I had to turn off hlsl and now works with d3d9. Tried to unthrottle , auto frameskip off, speed 1,5 and I notice that the sound is ok, game has no stuttering but seems to me quite slow, maybe is the game itself... seems to me having the same speed of original area 51 game. Grazie;

 

Modifié le 3 avril par Rhyader

[Rhyader]

Watched Dyniel's video: with my i7 10700k, the game runs slower than in the video, no matter what settings I choose, even opengl doesn't make a difference.... maybe is my cpu or maybe there are more settings to touch. I don't know how to run this game "without limits" , for example, I can't find any frame rate limiter ...

 

[hippopippo]

Yeah d3d9 issue is related to hlsl so just switch in auto instead, anyway tnx to all for testing, there are several things to fix (yet) but it’s not a rush so I’ll keep working on it till a stable full speed build to pull via official request. 

[Rhyader]

Thanks, do you think my CPU Is enough for this game?

[hippopippo]

my compiler runs on an i9 13900k so everything below ….. definitely no

[customizer2]

Hello. Does anyone have Mame 0.267 or later special build that has Konami Viper controls fixed ?. I would like to play the game "Gti Club 2: Corso Italiano", but the controls of this game don´t work on the official Mame build. 

I will be grateful if someone can share this Konami Viper fixed build !

Modifié hier à 19:54 par customizer2

[ducon2016]

3 hours ago, customizer2 said:

Hello. Does anyone have Mame 0.267 or later special build that has Konami Viper controls fixed ?. I would like to play the game "Gti Club 2: Corso Italiano", but the controls of this game don´t work on the official Mame build. 

I will be grateful if someone can share this Konami Viper fixed build !

 

Can you provide more info about the build that had the controls fixed? If we can check the code, I am sure @hippopippo can work out his usual magic and integrate them in his build. Without the code, might be hard.

[hippopippo]

I made a wip build a few years ago with the viper patch, but I don't remember where I put the source, I have a messed up head and too many years on my shoulders 😄

 

Tomorrow I'll try to look for it and write something down

 

 

[ultrabub563]

what the calabration?