Jump to content

[Tuto] Mario Kart DX Arcade GP 1.10, including banapassport save and online play, QR codes and LAN versus play !


Recommended Posts

Guest linglang
Posted (edited)

Till this day I see people having trouble installing, Mario Kart DX Arcade GP.

 

So here a tutorial, I hope it helps.

 

Here we go .....

mario_kart_icon_by_betatus-d6th2q4.png

 

Unpack the game in a folder of your choosing.

Link TeknoParrot 1.92 (1.86) to MK_AGP3_FINAL.exe

Set the correct resolution in TeknoParrot, game specific settings tab.

Game resolution not correct ?

Check these files, open with notepad.

Edit teknoparrot.ini in the game folder, for the correct resolution.

Edit, AMConfig.ini in gamefolder/AMCUS.

Edit, DefaultConfig.csv in gamefolder/Data/System/Config.

 

 

In TeknoParrot 1.0.0.142 Bana passport / online game save work again !!

 

Mario Kart DX Arcade GP, online gaming / banapassport save does not work correctly, with TeknoParrot 1.92.+

Tested it with version 1.0.0.125, game / banapassport save still does not work properly.

Fallback to version 1.86 for online game / banapassport save.

Old versions of Teknoparrot can be found on the front page !

First of all, be aware that a mirror of all versions is available on this link . 
First of all, be aware that a mirror of all versions is available on this link . 


The latest version is either available on the mirror or on the official website .

 

Use TeknoParrotOnline.exe for online gaming, register a Mario Kart account on www.teknoparrot.com (top right).

 

Login at www.teknoparrot.com

And now you see MKDX

Create a MKDX profile.

Add the account number to TeknoParrot MKDX settings.

 

Create a shortcut for MKDX, check properties of shortcut, and add.

Target:

"            \Your TeknoParrot Folder\TeknoParrotUi.exe" --profile=MKDX.xml

(notice the space between " and --)

Above start in:

 

https://ibb.co/PQjc8bq

The blank area is the path to YOUR TeknoParrot 1.86 !

 

NOTE:
* Mario Kart DX Must be run as admin since emulation of Namco amAuth COM interface does not work otherwise. (You cannot get online)
* As gateway put your local area networks own gateway. (For example 192.168.1.1)
* Get PlayerId from https://teknoparrot.com/ (after registration)
* Leave ServerAddress and ServerPort as is unless other servers come around.
* AmAuthPort leave it unchanged unless you have to use only certain port on your local machine for amAuth emulation.
* Full player statistics pages coming soon!

 

Press F2 to insert your Bana passport card, after ending the game / saving, remove the card again by pressing F2.

 

But before you can start, be sure to install these files first !!

 

This is a slightly edited copy from the front page, but still people look past it.

All research, and links to files below, thanks to their respective posters !

 

First, think about updating your system files:

https://www.sereby.org/site/downloads/All in One Runtimes

(clean pack, without any bastard installation, removes itself and you can uncheck the features that you do not like, like Java for example)

Note that for some games like MarioKartDX, you will also need the installation of the Direct X SDK.

The end user runtimes is already integrated in the pack but if you do not want to install this pack then install the runtimes yourself.

DirectX End-User Runtimes (June 2010): 

https://www.microsoft.com/en-us/download/details.aspx?id=8109 ( normally present in the sereby pack )

DirectX SDK (June 2010): 

https://www.microsoft.com/en-us/download/details.aspx?id=6812 )

You can ignore the error at the end of the installation.

 

Failed creating Direct 3D device.

Game won't launch due to graphic error, or only launches in a tiny window.

This game requires a couple of extra DLLs to run properly.
Download here: https://mega.nz/#!eIlGAKDS!sOCDDmPXCmPwzSZ_EPCPvg3SIMXbSVQ0PscachAS-K8
Extract to respective folders inside Windows directory.

Mirror:

Fix: http://www.emuline.org/applications/core/interface/file/attachment.php?id=4335

Enable "Nam Cam"
Apparently only works for certain model web cams, so if it doesn't work for you, then maybe you're out of luck.

We're still investigating.

 

Executable file is, MK_AGP3_FINAL.exe (Run as administrator)

 

1) Run game and enter test menu. Choose 2nd option from the top:

mk3cam1.png

2) In next screen, choose 4th (bottom) option and turn to ON or OFF as needed.

mk3cam2.png

As far as I know this is all the information you need to get the game working.

Otherwise you get a error E08-01

1475302715.1834.jpg

 

LAN versus play !

https://ibb.co/30gLstv

https://ibb.co/D9sNM1f

https://ibb.co/mFzwnQC

https://ibb.co/9t9VRzx

https://ibb.co/LPmj2wc

 

How to ?

I set my network to use preferred network addresses.

xsia_top.png.pagespeed.gp+jp+jw+pj+ws+js

192.168.1.1 for the router.

192.168.1.2 for the first PC.

192.168.1.3 for the second PC.

Et cetera.

 

You want to know your network settings ?

Windows key+r

cmd

ipconfig /all
 

In TeknoParrot 1.86 (if you want banapassport safe) set your network address in MKDX settings.

https://ibb.co/FVPgZ93

(uncheck General - Windowed)

 

Get in the service menu.

(set buttons in TeknoParrot)

https://ibb.co/wyg6qkQ

 

https://ibb.co/F7RCdyF

https://ibb.co/qMmS985

And set one PC / cabin to board ID 1, and the other PC / cabin to board ID 2 (or 3 or 4)

https://ibb.co/TvPrrWr

 

There are also translation packs, to French and English.

(save the original files)

Still a work in progress.

Also from the front page.

French translation pack here:

 

(Sorry link is dead at the moment, admins will probably solve in due time.)
English translation pack here:

https://github.com/Harmmmm/MKDX-English-Mod

New version releases on 24-03-2019 !

 

Game unlock patches are here, also from the front page, but as far as I know these patches only work on version 1.00.

(lien1 [All cups unlock save by beatlep]

lien 2 [All unlock save by Reaver)
The second link is a 100% unlock ?

 

Found this on the emuline discord.

 

MKDX 1.10 100% unlock ?

 

Quote:

 

Mario Kart GP Deluxe 1.10 + Teknoparrot 1.63 Now All can be unlocked, look this vidéo :

- All items - All characters + QR code Characters - All karts + all colors,

the 2 missing karts are QR code Karts you cannot save them permanently as the original game

- All Championship gold in 50cc /100cc/150cc/150cc mirror - Story mode was finished 3 times to unlock 3 karts QR Code here (you need a compatible webcam) :

https://uptobox.com/oy10r7emr523

Don't ask me to share this savegame because it is not possible,

it is an individual backup stored on a network server via bana passport emulated

 

Here some other QR codes, I doubt that it will work, because we do not have the updated version of Mario Kart. (1.10+)

So We do not have the new Pac-Man Stadium and Namco Circuit .:(:

The update of 21 April 2016 has these tracks.

Version 1.10 was released on 1 September 2015 ?

There was also a update on 18 December 2018.

Two new races are added:

Banana Labyrinth "and" DK Jungle ", two technical tracks, with racing a lot of successive curves.:o

 

Fire Mario

spcode-firemario.jpg

Ice

spcode-iceluigi.jpg

Blue Luigi Toad 

spcode-aokinopio.jpg

Strawberry Don-chan

spcode-ichigodonchan.jpg

Red Yoshi

spcode-akayoshi.jpg

Gold Mario Hone Koopa

spcode-goldmario.jpg

 

spcode-honekoopa.jpg

spcode-yushadonchan.jpg

spcode-kuroyoshi.jpg

spcode-turbodolphin.jpg

spcode-hunterbee.jpg

mdx_06.jpg

mdx_07.jpg

mdx_09.jpg

mdx_12.jpg

mdx_14.jpg

mdx_19.jpg

mdx_51.jpgmdx_52.jpg

mdx_53.jpg

mdx_62.jpg

mdx_58.jpgmdx_59.jpg

mdx_54.jpg

mdx_63.jpg

mdx_68.jpg

Anyhow ....

Enjoy !!! (version 1.10)

No, I do not have a later version !

 

Green-Red-Blue-Shell-Mario-Kart-enamel-p

I hope that this tutorial helps other people out.

It takes you a few moments to read, but it took me all night to figure it out.

When you get the game working, thanks to this "manual", please give a thanks at this post.

:very-good:

 

And a BIG thanks for the people who originally uploaded the games, we all can enjoy (if you do it right) !!!

And of course all the people involved in, the game loaders and JVS I/O emulation applications we use, and all the people I "forgot".

 

Also look at the posts below, some members / people add helpful information, thank them also .....

 

https://www.mariowiki.com/Mario_Kart_Arcade_GP_DX

https://www.nintendoenthusiast.com/2015/07/10/mario-kart-arcade-gp-dx-getting-its-first-yearly-update/

 

Edit:

There is also a way to run Mario Kart GP Arcade DX version 1.10 100% unlocked with these files.

http://www.emuline.org/applications/core/interface/file/attachment.php?id=4886

The latest version of this tool can be downloaded from this page:

(version 1.6 as of 28-02-2019)

The profile.bin file needs to be placed in the folder: game folder/sv

BUT, at the moment I get very often a DNS error, and JconfigMK.exe does often not register the joystick buttons correctly.

I can not get gas and brake assigned onto the triggers, it sees it as buttons 4 and 5 ? (at other times as other buttons)

 

And no, the profile.bin file does not unlock anything when used to run the game with TeknoParrot.

 

Onto a bug hunt !!!

 

tumblr_mpk6ygWd2o1r8ptvvo1_500.jpg

 

If somebody knows a solution, for the above described problems, please leave a helpful comment in this thread, to also help other people on this forum out.

 

giphy.gif?cid=3640f6095c6bd5785677744e6b

Edited by linglang
Added information, information about online gaming and banapassport save, added correct links, added request, added 1.10 100% unlock QR code, English translation pack update, added QR codes.
Posted (edited)
On 2/28/2019 at 1:57 AM, linglang said:

Runtimes

Can 1.93 play online?

Edited by Baka9
  • 2 weeks later...
Posted

Wait, so which one of these links has the actual base game?

Questioning because LAN and stuff like that are out of the question for me.

Posted (edited)

Hi there. 

 

I love MK. I got the English original 

Manual of the Arcade. Anyone need? 

 

So another question. Is it possible to 

Update MK without internet? I mean 

to update via placing the update files into there correct folders etc? 

 

And last question.

Anyone played the latest version? 

Is it possible to drift there cause on 

the first version I am not able to drift

or I am too dumb :P

 

Cya

 

Update.
Manual English. Just a nice to have

 

https://www.bandainamco-am.co.uk/files/37

 

Maybe helpfull for Newbies without the english conversion.

 

 

 

Edited by Fulgore18
  • 2 weeks later...
Posted

Hi !

I really appreciate the great works done by all of you to allow to play this great version of the game.

 

i though the japanese 1.10 update includes the PacMan courses. Am i wrong ?

 

  • 3 weeks later...
Posted
On 06/05/2019 at 6:16 PM, Visitor Q said:

Version V1.0 runs at 1024x768 or 1280x720, I don't recall but is there anyway to run 1.10 at one of these resolutions?

Seems to work best at 1360x768

Posted

Thank you so much for this guide. All up and running with my wheel on teknoparrot. Awesome game. However. I cannot jump drift. Any clue what I'm doing wrong? Running 1.10.22, using thrustmaster wheel, tried accelerate on buttons and also pedals. Press down on brake while holding accelerate as approaching a corner, but don't jump or drift. Got a feeling I'm missing something obvious. Perhaps the earlier cars don't drift?

Guest linglang
Posted (edited)

@butflash

Sorry for my late reaction, I was away for a while.

 

I think the solution for not being able to drift is ......

The settings in TeknoParrot for MKDX should be checked for General - Xinput.

At least that is the solution for me for usage with a joystick, no idea if this works for a steering wheel, good luck.

Edited by linglang
Guest pixels
Posted
3 hours ago, linglang said:

@butflash

Sorry for my late reaction, I was away for a while.

 

I think the solution for not being able to drift is ......

The settings in TeknoParrot for MKDX should be checked for General - Xinput.

At least that is the solution for me for usage with a joystick, no idea if this works for a steering wheel, good luck.

welcome back linglang, you were truly missed mate!

Posted
On 19/06/2019 at 8:36 PM, linglang said:

@butflash

Sorry for my late reaction, I was away for a while.

 

I think the solution for not being able to drift is ......

The settings in TeknoParrot for MKDX should be checked for General - Xinput.

At least that is the solution for me for usage with a joystick, no idea if this works for a steering wheel, good luck.

Thank you @linglang Hopefully I'll get a chance to try this out later tonight. I'll leave feedback here in case anybody else has the same issue

Posted
On 19/06/2019 at 8:36 PM, linglang said:

@butflash

Sorry for my late reaction, I was away for a while.

 

I think the solution for not being able to drift is ......

The settings in TeknoParrot for MKDX should be checked for General - Xinput.

At least that is the solution for me for usage with a joystick, no idea if this works for a steering wheel, good luck.

Alas, this didn't work. As my wheel is Direct input, when I select Xinput my wheel is not recognised as an input device, that is nothing responds when configuring the controls. I guess I'm going to have to play this on the Xbox pad in order to jump-drift :( :( :( :( 

  • 1 month later...
Posted

Hello I have Mkdx with french traducción, I use Jconfig, the Game works but when play 10-12 games show Windows error.

I have Nvidia Gt750

8 GB RAM, Windows 10 and Pentium G4560 with 3.5 GHz. Anyone hace this error?

  • 2 weeks later...
Guest trouby
Posted

mdx_14.jpgmdx_63.jpgdd

darn good looking game alright. 😍🏓

Guest trouby
Posted (edited)
On 10/08/2019 at 6:21 AM, gareth_iowc said:

any signs of a full english rip yet?

nope, only text is translated to English so far.  i know, i would like to know wtf that women is saying also 🤨

Edited by trouby
  • 4 weeks later...
Posted (edited)

I am currently having an extreme problem with running Revision 1.00.32.

Every time I run it, it crashes after the self-test, and if I don't use Admin, it throws either "Failed to create Direct3D device." and automatically closes, or throws both "Failed to create Direct3D device." and "The Direct3D device was removed.", closing afterwards, although I had already copied the D3D11Ref.dll files into the System folders.

If I do use Admin, it still crashes after the self-test, but it doesn't throw any errors.

The only place that doesn't crash after self-testing is the test menu. I've experimented with some of the settings, and it did nothing to help with the cause. Plus, even if I'm running it with Admin permissions, it shows that I'm not online.

Sometimes, if I'm lucky, I can get to the Attract green text, but it crashes afterwards.

Basically, the game is crashing no matter what I try, and I'm confused about how.

 

Specs:

Alienware, Revision 1

CPU: Intel i7-47 @ 2.50GHz, max speed: 4.55GHz

GPUs: Intel HD Graphics 4600, NVIDIA GeForce GTX 970M

Hard Drive: 500GB Samsung SDD, 6GB/s

Windows 10, Version 1903 (OS Build: 18362.418)

Edited by Distray
Forgot to add specs
Posted

Mario runs fine on windows [Version 10.0.18363.476] v1903 with teknoparrot 1.0.0.242

Run teknoparrot as administrator

Run MK_AGP3_FINAL.exe as normal user

Antivirus disabled ?

Try new install of game files ?

Posted (edited)
23 minutes ago, petje said:

Mario runs fine on windows [Version 10.0.18363.476] v1903 with teknoparrot 1.0.0.242

Run teknoparrot as administrator

Run MK_AGP3_FINAL.exe as normal user

Antivirus disabled ?

Try new install of game files ?

I tried updating Windows and TeknoParrot, but that did nothing to the cause.

 

I'm currently using XInput, and running in a 1360x768 window.

I may have to disable Windowed.

 

Disabling Windowed also didn't fix anything.

Edited by Distray
Posted
1 hour ago, Distray said:

GPUs: Intel HD Graphics 4600, NVIDIA GeForce GTX 970M

 

I see now

Do not use your intel gpu to play this game

 

Posted (edited)

I am using the NVIDIA GPU to run TeknoParrot, but for some reason, TeknoParrot runs Mario Kart Arcade GP DX with the Intel processor by default.

I set the preferred GPU to the GTX, and now it works.

An extra note: I mapped the controls in the worst possible way, and movement is an absolute nightmare.

jesuscrust.PNG

Edited by Distray
Guest student123
Posted

Hi guys, 

 

Any trick to set steering wheel, brake and gas on a keyboard? 

 

You can set it in the game options, but then doesn't do anything ingame. 

 

I am using an Ipac 4 on a full arcade cabinet, so playing this on an xbox controller would defeat the purpose. 

 

I read somewhere you could use UCR (universal control remapper) to for an axis on from 2 button presses, any other way? 

 

Thank you for the help! 

Posted

Anyone else notice subtle glitches when running higher resolutions? For example during selection screen the square is fully green and when you win the eggs by yoshi you cant see the winning object only the background? I tried linglangs:

Edit teknoparrot.ini in the game folder, for the correct resolution.

Edit, AMConfig.ini in gamefolder/AMCUS.

Edit, DefaultConfig.csv in gamefolder/Data/System/Config.

but that doesnt seem to fix the little glitches.

 

I even tried the MKDX_ShaderResolution fix but that did fix the green squares selection bug, but when you win and open the eggs you still cant see what you won? Does it still not work outside of its native resolution? Thx in advance!

 

 

Posted (edited)
Le 06/05/2019 à 18:16, Visitor Q a dit :

Version V1.0 runs at 1024x768 or 1280x720, I don't recall but is there anyway to run 1.10 at one of these resolutions?

And no, the profile.bin file does not unlock anything when used to run the game with TeknoParrot.

Sarkari Result Pnr Status 192.168.1.1

Edited by ELIOTYRA
Guest student123
Posted (edited)

So was able to get UCR + vjoy working. Emulates 4 xbox controllers and was able to configure Pacman BattleRoyal and a bunch of pc fighting games to play perfectly. Mario kart should work perfect now.

 

You guys know how to get UCR loaded in rocketlauncher automatically? Tried using AHK in the pc games.ini but come up with a loading screen that never goes away on Hyperspin.

 

Here is the tutorial I followed: https://medium.com/@thedoteater/ucr-x360-controller-support-for-multiplayer-from-single-hid-tutorial-c4801663b89f

 

Here is the Rocketlauncher tutorial too : https://medium.com/@thedoteater/automating-ucr-via-rocketlauncher-tutorial-b7424c8a7a41

 

I used the following scripts : 

 

UCRStart.ahk

Run, UCR.exe

{
WinWait, UCR - Universal Control Remapper v0.1.18
WinHide
Sleep, 5000
}

Exitapp
Return

 

UCRStop.ahk

Process, close, UCR.exe
Exitapp
Return

 

 

Loaded in Rocketlaucher via this: 

 

PreLaunch = ..\Software\UCRStart.ahk
PostExit=..\Software\UCR\UCRStop.ahk

 

Used this with the regular ini information I use to get games loaded. Updated the program name from task manager to match the version I loaded.

 

Game starts loading, but gets stuck at the loading screen in hyperspin. Any ideas?

 

Thanks!!

 

Credits to "TheDotEater" for the tutorials!, 

 

 

Note: Got it working, issue was the game I was testing, just need to update Universal Control Remapper v0.1.18 to the current version : Universal Control Remapper v0.1.22 in the script

Edited by student123
Posted

this tutorial is old but has some shit in it that helps , but it seems it was only on the fukn front page. anyway, for future noobs this is still ok.  😅

 

Posted
On 11/17/2019 at 9:25 PM, petje said:

No need to run TeknoParrotUi.exe with the nvidia card you can if you want to

But you need to run the game MK_AGP3_FINAL.exe with nvidia

https://imgshare.io/image/mkdx-joystick.U4Rr4

Check general-xinput in game settings or you can not drift

 

I am using XInput and a PS4 controller with DS4Windows, and I can only accelerate [slowly] at a very specific angle on the right thumb.

If I deviate slightly from the angle, I literally can't move.

That is the exact reason why I decided to turn Auto-Acceleration on.

  • 5 weeks later...
Posted

Hello, I have the following problem.  Mario Kart starts I select everything and after the loading screen I always fly out of the game without receiving an error message.  I have NVIDIA® GeForce® 750Ti graphics.  What else do I have to set to make it work?  Thanks in advance

Posted
1 hour ago, iAno said:

Hello, I have the following problem.  Mario Kart starts I select everything and after the loading screen I always fly out of the game without receiving an error message.  I have NVIDIA® GeForce® 750Ti graphics.  What else do I have to set to make it work?  Thanks in advance

 

Did you check this ?

 

https://teknogods.github.io/compatibility/mkdx.htm

 

On 11/25/2019 at 2:25 AM, sharingam said:

Hello Could someone send me the Save 100% of Mario Kart DX 1.10.

(lien1 [All cups unlock save by beatlep] + lien 2 [All unlock save by Reaver])
 

Posted (edited)

where must the sav file be saved?  I saved the file in the root folder, nothing is unlocked

Edited by iAno
Posted
On 12/26/2019 at 6:01 AM, iAno said:

where must the sav file be saved?  I saved the file in the root folder, nothing is unlocked

 

Does anyone know? I am also having this issue. I even created a sv folder in mkdx10 folder and placed the profile.sav file there. Thanks in advance

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...