GamingRob Posted November 20, 2019 Share Posted November 20, 2019 4 minutes ago, customizer2 said: Are you on Windows 7 or Windows 10 ? It´s weird, are you using only JConfig or RH Loader along with it ? I'm on Windows 10. First I tried with JConfig only, now with RH Loader... but there's basically no difference. After every race there is a crash. Errolog always says 'Read from location 00000000 caused an access violation'. I now tried with a fresh original folder + Jconfig... same problem. I guess I have to give up. Link to comment Share on other sites More sharing options...
customizer2 Posted November 20, 2019 Share Posted November 20, 2019 hace 7 minutos, GamingRob dijo: I'm on Windows 10. First I tried with JConfig only, now with RH Loader... but there's basically no difference. After every race there is a crash. Errolog always says 'Read from location 00000000 caused an access violation'. I now tried with a fresh original folder + Jconfig... same problem. I guess I have to give up. I don´t know if the version of Windows 10 has something to do with the issue, I have an old version of Windows 10. version 1709. I have heard it works better on Windows 7 or 8 and on early versions of Windows 10, but not sure, maybe the GPU model has to do too with the problem, who knows ? Link to comment Share on other sites More sharing options...
Guest Hot buttered poodle Posted November 20, 2019 Share Posted November 20, 2019 I know Im going to get some comments for this post but I honestly dont know what Jconfig is. Is it a loader like TP to load games through or what? I keep reading and reading about it but I dont know how to use it or where to download it from. Is there a Jconfig site or something to get it from? Sorry for being so ignorant about this but I want to get Snocross running and this seems like the only way to do it for now. Thanks for Any help😀 Link to comment Share on other sites More sharing options...
arcade_power Posted November 20, 2019 Share Posted November 20, 2019 10 minutes ago, Hot buttered poodle said: I know Im going to get some comments for this post but I honestly dont know what Jconfig is. Is it a loader like TP to load games through or what? I keep reading and reading about it but I dont know how to use it or where to download it from. Is there a Jconfig site or something to get it from? Sorry for being so ignorant about this but I want to get Snocross running and this seems like the only way to do it for now. Thanks for Any help😀 Jconfig is an application/tool that let's you play certain arcade games as stand-alone and configure your gamepad, meaning you can play certain games without any loaders/emulators etc. You simply download a Jconfig for a game you want to play from 1cc on Discord (or on this site) and place the required files in the game folder, where the game executable file is. Then you run the Jconfig.exe application and configure your keys/butons etc. And after that you run the game executable to play. Link to comment Share on other sites More sharing options...
GamingRob Posted November 20, 2019 Share Posted November 20, 2019 Well, I'm on Win 10 Pro version 1703. GPU is GeForce GTX 1050 Ti. So it's not completely different from some systems SnoCross is working on with less problems, it seems.... Link to comment Share on other sites More sharing options...
arcade_power Posted November 20, 2019 Share Posted November 20, 2019 11 minutes ago, GamingRob said: Well, I'm on Win 10 Pro version 1703. GPU is GeForce GTX 1050 Ti. So it's not completely different from some systems SnoCross is working on with less problems, it seems.... yeah.some people are lucky enough to be able to play it without any major issues, some not so much. Only thing I can say is that it worked much better for me using the All RH Loader, than without. Link to comment Share on other sites More sharing options...
davodeaks Posted November 20, 2019 Share Posted November 20, 2019 10 hours ago, xtremebuga said: Set it up with Jconfig and use Game Loader All RH to run, it's perfect. Cheers will give it a go tonight Link to comment Share on other sites More sharing options...
Guest Hot buttered poodle Posted November 21, 2019 Share Posted November 21, 2019 1 hour ago, arcade_power said: Jconfig is an application/tool that let's you play certain arcade games as stand-alone and configure your gamepad, meaning you can play certain games without any loaders/emulators etc. You simply download a Jconfig for a game you want to play from 1cc on Discord (or on this site) and place the required files in the game folder, where the game executable file is. Then you run the Jconfig.exe application and configure your keys/butons etc. And after that you run the game executable to play. So I d/l the file on the first page under Jconfig SnoCross_2019_11_18.rar and then extract the files and then place the extracted files in the same folder as the exe and it "should" work? Link to comment Share on other sites More sharing options...
Guest Hot buttered poodle Posted November 21, 2019 Share Posted November 21, 2019 Ok...so I got the game to run. But....its very hit and miss for me. Sometimes I can play a full track then it crashes back to the desktop and other times it crashes before I can even choose my bike or my upgrades. Any way to fix this problem or am I just stuck with the way it plays?? Link to comment Share on other sites More sharing options...
mamefan2018 Posted November 21, 2019 Share Posted November 21, 2019 so here is an update with snocross and jconfig ... i only used it on my win 10 (build 1903) with NVIDIA GPU and it was really unstable ..some stages were good others were messed up and it would crash randomly ...and after each race it always crashes ...with the d4d8to9 fix it helped a litlle because it rarely crashes in the menus and the graphics in a lot of areas are better .. but still lots of messed up stages and crashes randomly at some stages and at the end of each stage it always crashes ... tried game loader and still the same problems. so today i tried on my win 7 machine (Nvidia GPU) .. and i used a fresh copy no fixes applied just the Jconfig files and guess what it plays perfectly fine ... i tried every single stage and played them all to the end and saved my scores and it never crashed ... and almost all graphical glitches r gone .. only time i saw something wrong was in the Washington track for a coupl eof seconds and thats all .. so i played for at least 30 mins and it was perfect ... so my guess its mainly a win 10 issue. 1 Link to comment Share on other sites More sharing options...
DarkX1 Posted November 21, 2019 Share Posted November 21, 2019 I wonder if they coded it on Windows 7? It was a 2012 release and probably in development since 2010 & 2011. Its newer than Superbikes 2 though which runs flawless on Win 10/Nvidia Link to comment Share on other sites More sharing options...
tweetyfromouterspace2 Posted November 21, 2019 Share Posted November 21, 2019 hi guys question for jconfig team is your starwars battle pod loader builded with win10 lib exclusively ? (specifically xinput v1.4 dll) if yes, could you rebuild your dll with win7 lib (xinput v1.3 dll). Not sure, but may be the reason I can't launch your loader on win 7 1 Link to comment Share on other sites More sharing options...
GamingRob Posted November 21, 2019 Share Posted November 21, 2019 3 hours ago, mamefan2018 said: so here is an update with snocross and jconfig ... i only used it on my win 10 (build 1903) with NVIDIA GPU and it was really unstable ..some stages were good others were messed up and it would crash randomly ...and after each race it always crashes ...with the d4d8to9 fix it helped a litlle because it rarely crashes in the menus and the graphics in a lot of areas are better .. but still lots of messed up stages and crashes randomly at some stages and at the end of each stage it always crashes ... tried game loader and still the same problems. so today i tried on my win 7 machine (Nvidia GPU) .. and i used a fresh copy no fixes applied just the Jconfig files and guess what it plays perfectly fine ... i tried every single stage and played them all to the end and saved my scores and it never crashed ... and almost all graphical glitches r gone .. only time i saw something wrong was in the Washington track for a coupl eof seconds and thats all .. so i played for at least 30 mins and it was perfect ... so my guess its mainly a win 10 issue. Thanks. So it seems I'm doomed, as I don't have any Windows 7 machine anymore. Still strange that some people here can play fine on Windows 10. Link to comment Share on other sites More sharing options...
mamefan2018 Posted November 21, 2019 Share Posted November 21, 2019 4 minutes ago, GamingRob said: Thanks. So it seems I'm doomed, as I don't have any Windows 7 machine anymore. Still strange that some people here can play fine on Windows 10. maybe older builds of win 10 can give much better results .... but yea i was really surprised how will it run on win 7 and an older machine too ...and the game did run really well now slowdowns or anything Link to comment Share on other sites More sharing options...
Guest Hot buttered poodle Posted November 21, 2019 Share Posted November 21, 2019 14 hours ago, arcade_power said: Jconfig is an application/tool that let's you play certain arcade games as stand-alone and configure your gamepad, meaning you can play certain games without any loaders/emulators etc. You simply download a Jconfig for a game you want to play from 1cc on Discord (or on this site) and place the required files in the game folder, where the game executable file is. Then you run the Jconfig.exe application and configure your keys/butons etc. And after that you run the game executable to play. I forgot to thank you for helping me....so thank you😀 Link to comment Share on other sites More sharing options...
Team 7zxkv Posted November 21, 2019 Author Team Share Posted November 21, 2019 spicetools 17nov: - Screenshots (PrtScr Key) - DLL Architecture detection - SCard Felica support - Improve MIDI performance - Fix bt5api error handling - Fix XP support 1 Link to comment Share on other sites More sharing options...
customizer2 Posted November 21, 2019 Share Posted November 21, 2019 (edited) hace 5 horas, GamingRob dijo: Thanks. So it seems I'm doomed, as I don't have any Windows 7 machine anymore. Still strange that some people here can play fine on Windows 10. You can install Windows 7 in dual boot with Windows 10 on another partition, or run Windows 7 on a virtual machine - The drawback is that it will take some extra space of your hard disk. If you have VMWare and install Windows 7 x64, maybe it works fine, I didn´t try yet Edited November 21, 2019 by customizer2 Link to comment Share on other sites More sharing options...
customizer2 Posted November 21, 2019 Share Posted November 21, 2019 (edited) Today I tried SNOCROSS again in C: rawart, and found that I was wrong yesterday. The game has random crashes even placed in C:rawart, at least for me, in Windows 10. I give up trying, there may be many possible causes for it, and I don´t have much time to test, maybe the game needs Windows 7 so as not to crash ? Edited November 21, 2019 by customizer2 Link to comment Share on other sites More sharing options...
soso92 Posted November 21, 2019 Share Posted November 21, 2019 Nobody found in the Washington DC race at one point of the race the road is not visible ???? I just noticed some graphic bugs for this race all the other races are ok Link to comment Share on other sites More sharing options...
DarkX1 Posted November 21, 2019 Share Posted November 21, 2019 What RH loader are you guys using? Link to comment Share on other sites More sharing options...
Inari Posted November 22, 2019 Share Posted November 22, 2019 (edited) 12 hours ago, customizer2 said: Today I tried SNOCROSS again in C: rawart, and found that I was wrong yesterday. The game has random crashes even placed in C:rawart, at least for me, in Windows 10. I give up trying, there may be many possible causes for it, and I don´t have much time to test, maybe the game needs Windows 7 so as not to crash ? Yeah, nothing impacts the stability on Win10 (aside from having close to root, else some races won't even start). I'm going to try it on a Win7 VM next (don't want dual boot). EDIT: Someone posted on my account again. I'll always let yall know if a post is done by the real me. Always check who you're logged in as when you use the forums please. ~Inari Edited November 22, 2019 by Inari Link to comment Share on other sites More sharing options...
tweetyfromouterspace2 Posted November 22, 2019 Share Posted November 22, 2019 (edited) thx for the new version but no go on win 7 now the xinput v1.3 dll is loaded instead of v1.4 -> ok sv directory is created with all directory Inside that were before in G and H drive-> ok the original exe is launched -> ok but an unreal crash dump is now created (no window, no errors) may be looking for other users if they have same trouble I have I'm unable to discuss this on their jconfig channel because 1cc is totally locked for new guys update : nevermind, after a reboot all is working normally. certainly old ghosted dll in memory Edited November 23, 2019 by tweetyfromouterspace2 Link to comment Share on other sites More sharing options...
soso92 Posted November 22, 2019 Share Posted November 22, 2019 Il y a 3 heures, spiderzsoft a dit : @tweetyfromouterspace2 Star Wars Battle Pod Jconfig update post 1 - Game sound fixed - Test menu saving correctly - Optimized main engine - Forcefeedback added (experimental) For windows 10, set to Win8 compatibility modeSpecial Thanks Goes To... FlyBIT - Jconfig developersimple_peon - for memory analysis, view button and test menu button were discoveredTP BANDIT - for analyze in memorySource: 1cc For Further Information Check Top of The Post #1 Hi man and thx for information In read me file I see : High Resolution: On/Off Sets the game to run in 480P or 720P Natively. When i open Jconfig.exe interface I dont see where put the game on 480p for test it Can you explain how do that ??? This update work for win7 64 bits ??? Link to comment Share on other sites More sharing options...
DarkX1 Posted November 22, 2019 Share Posted November 22, 2019 damn, I have windows 10. Why does windows 10 have to ruin playing SnoCross for me ? haha Link to comment Share on other sites More sharing options...
alexillo90 Posted November 22, 2019 Share Posted November 22, 2019 Any news if they gonna support dirty driving? Link to comment Share on other sites More sharing options...
GamingRob Posted November 22, 2019 Share Posted November 22, 2019 Any news if anyone is trying to make Snocross stable on Windows 10? I'm almost ready to install Windows 7, but I don't really want to. Is it stable on Windows 7 64 bit for someone or only on 32 bit versions? Link to comment Share on other sites More sharing options...
antonio2018 Posted November 22, 2019 Share Posted November 22, 2019 26 minutes ago, GamingRob said: Alguma novidade se alguém está tentando tornar o Snocross estável no Windows 10? Estou quase pronto para instalar o Windows 7, mas realmente não quero. É estável no Windows 7 de 64 bits para alguém ou apenas nas versões de 32 bits? yes for me it runs well with windows 7 64bits 1 Link to comment Share on other sites More sharing options...
GamingRob Posted November 22, 2019 Share Posted November 22, 2019 3 minutes ago, antonio2018 said: yes for me it runs well with windows 7 64bits Thanks, that will make it a bit easier for me. Link to comment Share on other sites More sharing options...
DarkX1 Posted November 22, 2019 Share Posted November 22, 2019 (edited) Someone said it crashed in windows 7 on youtube. Some say it works in win 10 (just crashes in Moscow and Washington DC) and some says it crashes after the end of each race in win 10. You can try it in windows 7 and see if that helps it. Edited November 22, 2019 by DarkX1 1 Link to comment Share on other sites More sharing options...
GamingRob Posted November 22, 2019 Share Posted November 22, 2019 34 minutes ago, DarkX1 said: Someone said it crashed in windows 7 on youtube. Some say it works in win 10 (just crashes in Moscow and Washington DC) and some says it crashes after the end of each race in win 10. You can try it in windows 7 and see if that helps it. Oh... I just hope it will work on Win 7. Will try installing it later tonight. Right now it crashes at the end of each race for me on Win 10. So only crashing on some tracks would be a big step forward already. Link to comment Share on other sites More sharing options...
customizer2 Posted November 22, 2019 Share Posted November 22, 2019 I tested Star Wars BP on Windows 10 and latest JConfig. Sound works fine, Test mode saves fine, but I have the problem that the game quits after one or two missions. I have ticked on Windows 8 compatibility mode as adviced. Could this be due to lack of Ram ? Did anyone have a similar issue ? Link to comment Share on other sites More sharing options...
soso92 Posted November 22, 2019 Share Posted November 22, 2019 il y a 27 minutes, customizer2 a dit : I tested Star Wars BP on Windows 10 and latest JConfig. Sound works fine, Test mode saves fine, but I have the problem that the game quits after one or two missions. I have ticked on Windows 8 compatibility mode as adviced. Could this be due to lack of Ram ? Did anyone have a similar issue ? you play in what resolution ??? I have no crash of the game but when I leave the game my PC is very very slow for a few minutes Link to comment Share on other sites More sharing options...
soso92 Posted November 22, 2019 Share Posted November 22, 2019 Il y a 6 heures, spiderzsoft a dit : Try this \Star Wars Battle Pods\Engine\Config\BaseEditor.ini [UnrealEd.GeneralSettings] MinimumEditorViewportSizeX=1280 MinimumEditorViewportSizeY=720 I tested Star Wars with the latest Jconfig on windows 7 64 bit I saw performance better than with Teknoparrot the game is faster and no crashes of the game. The display in the menus and him also faster than with Teknoparrot I uncheck High Resolution 1 Link to comment Share on other sites More sharing options...
customizer2 Posted November 22, 2019 Share Posted November 22, 2019 (edited) hace 2 horas, soso92 dijo: you play in what resolution ??? I have no crash of the game but when I leave the game my PC is very very slow for a few minutes I play in 1280 x 720, as I have high resolution ticked on JConfig. I have some delay in Windows after leaving the game too, but it quits faster than Teknoparrot. Edited November 22, 2019 by customizer2 Link to comment Share on other sites More sharing options...
GamingRob Posted November 23, 2019 Share Posted November 23, 2019 (edited) Here my Snocross update... I installed Win 7 64 bit, and for the first time ever the game did not crash for me after a race. I still wish it could work on Win 10 for the future... Edited November 23, 2019 by GamingRob Link to comment Share on other sites More sharing options...
mamefan2018 Posted November 23, 2019 Share Posted November 23, 2019 25 minutes ago, GamingRob said: Here my Snocross update... I installed Win 7 64 bit, and for the first time ever the game did not crash for me after a race. I still wish it could work on Win 10 for the future... yep like i expected ... its mainly a win 10 issue ... game runs fine on win 7. Link to comment Share on other sites More sharing options...
LEGEND80 Posted November 23, 2019 Share Posted November 23, 2019 11 hours ago, DarkX1 said: Someone said it crashed in windows 7 on youtube. Some say it works in win 10 (just crashes in Moscow and Washington DC) and some says it crashes after the end of each race in win 10. You can try it in windows 7 and see if that helps it. Colorado too. All three of those stages have extremely long loads and crash more often then not. Colorado and Washington also both have a ton of missing gfx too (related?). The other 4 stages look mostly fine and are mostly stable. Could be worse, just glad the game is 60% playable vs 0% on Win10. Hopefully those, the bike select and the post race crashes are isolated and fixed some day. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now