idMacX + J/Rconfig + JVSemu + SpiceTools + BemaniTools + SegaTools + etc.

[LEGEND80]

Spent a few hours with this last night and here's my personal notes on Win10 v1803 (didn't try the d3d8to9 file yet):

 

To Play:

 

-          State sdaemon

 

 

Controls:

 

-          Start:  Start

-          LS: Steering

-          LT/RT: Brake/Gas

-          A: Nitro/Balls

 

 

-          RSB:  Exit

-          Back: Camera

-          LSB: Coin

 

 

Issues:

 

-          Track issues:

o   Mosco (long load, unstable)

o   Colorado (long load,  missing gfx, unstable)

o   Wash DC (long load,  missing gfx, broken logic)

o   Alaska, Antarctica, France, China fine

 

-          Crash after race

-          Delete minidumps after crashes

-          Intermittent issues:

o   Bike selection unless spam start

o   Crash on race load

o   Slow menu (rare)

 

 

Initial Install:

 

-          Has to be close to root else race won’t start

-          Configure input/screen in config

Edited November 18, 2019 by LEGEND80

[joeplay]

hace 4 horas, enes dijo:

Games must be fully tested with jconfig, and if jconfig runs 100 percent games without error, jconfig should be released!
  The games must be tested with Intel, AMD, Nvida graphics cards and Intel, AMD processors. If a hundred games run without error, jconfig should be released.

Do you think Teknoparrot developers do that? ... and you pay for it.

Edited November 18, 2019 by joeplay

[GamingRob]

4 hours ago, teknikmans2 said:

try this file!

d3d8to9.7z

This seems to have helped, thanks!

 

Now I just have the same issues as others... crash at the end of a race and some gfx missing for some tracks.

Edited November 18, 2019 by GamingRob

[arcade_power]

Le 18/11/2019 à 18:02, LEGEND80 a dit :

Spent a few hours with this last night and here's my personal notes on Win10 v1803 (didn't try the d3d8to9 file yet):

 

(...)

Good analyze of all the issues! Hopefully they can be solved soon!

Edited November 20, 2019 by 7zxkv

[EmuAl]

just played Snocross for 20 odd minutes with no real issues at all great stuff... well done Flybit 

 

only problem i had was entering my name  can't land on the M at all  

Edited November 18, 2019 by EmuAl

[GamingRob]

1 minute ago, EmuAl said:

just played for 20 odd minutes with no issues at all great stuff... well done Flybit

So for you there is no crash after a race?

Could you tell us your settings and which system you are on?

[arcade_power]

19 minutes ago, EmuAl said:

just played Snocross for 20 odd minutes with no real issues at all great stuff... well done Flybit 

 

only problem i had was entering my name  can't land on the M at all  

You must have been super lucky then! The rest of us encounter all the issues mentioned above, and the crashing to desktop after a race being the most annoying one. 

[EmuAl]

i have amd gpu and dunno what other settings you need to know

 

 

 

one thing i don't do is button mash after a race to make it continue, just wait and be patient

Edited March 31, 2020 by EmuAl
had to remove images sorry

[DarkX1]

Does it work on Intel/nvidia and a gaming controller?  Like was done with Super Bikes 2? 

[braders1986]

Evening, gents.

 

Would anyone kindly tell me how to disable 3D Mode on Let's Go Island 3D when playing via Jconfig.

 

 

[GamingRob]

22 minutes ago, EmuAl said:

i have amd gpu and dunno what other settings you need to know

 

one thing i don't do is button mash after a race to make it continue, just wait and be patient

Thanks. So maybe it's the AMD GPU...

Do you run as admin or in any kind compatibiliy mode?

I don't mash buttons.

[EmuAl]

no changes to anything else and on latest win10

[GamingRob]

Hm I'm on Windows 10 v1803.

In case anyone can make sense of this... this is what the errorlog.txt says almost every time for me:

 

sdaemon caused an Access Violation in module sdaemon.exe at 0023:004cd31a.
Exception handler called in main thread.
Error occurred at 11/18/2019 20:46:52.
C:\rawart\sdaemon.exe, run by Unknown.
4 processor(s), type 586.
2048 MBytes physical memory.
Read from location 00000000 caused an access violation.

Registers:
EAX=8007000e CS=0023 EIP=004cd31a EFLGS=00010246
EBX=00000000 SS=002b ESP=6512fb90 EBP=00000015
ECX=0ea56c46 DS=002b ESI=4056f540 FS=0053
EDX=00000036 ES=002b EDI=00000800 GS=002b
Bytes at CS:EIP:
8b 13 8b 42 34 53 ff d0 89 46 38 5d c7 46 44 92 

 

[arcade_power]

2 minutes ago, GamingRob said:

Hm I'm on Windows 10 v1803.

In case anyone can make sense of this... this is what the errorlog.txt says almost every time for me:

 

sdaemon caused an Access Violation in module sdaemon.exe at 0023:004cd31a.
Exception handler called in main thread.
Error occurred at 11/18/2019 20:46:52.
C:\rawart\sdaemon.exe, run by Unknown.
4 processor(s), type 586.
2048 MBytes physical memory.
Read from location 00000000 caused an access violation.

Registers:
EAX=8007000e CS=0023 EIP=004cd31a EFLGS=00010246
EBX=00000000 SS=002b ESP=6512fb90 EBP=00000015
ECX=0ea56c46 DS=002b ESI=4056f540 FS=0053
EDX=00000036 ES=002b EDI=00000800 GS=002b
Bytes at CS:EIP:
8b 13 8b 42 34 53 ff d0 89 46 38 5d c7 46 44 92 

 

I get this error as well at times, but saying 6 processors  for me instead of 4, most likely because I have AMD-FX 6300. 

[EmuAl]

also i have the game in

 

g\roms\arcadepc\snocross\

 

incase that matters

 

i got intel i5 6600 cpu and amd gpu

Edited November 18, 2019 by EmuAl

[DarkX1]

Does it work on Intel/nvidia and a gaming controller?  Like was done with Super Bikes 2? 

[leonardombn]

Mon SNOCORSS démarre, mais ne quitte pas cet écran d'impression ou se termine de manière inattendue. Les commandes ne répondent pas non plus au menu de sélection. Une solution d'amis?

My SNOCORSS starts but does not exit this print screen, or ends unexpectedly, the controls also do not respond to the selection menu. Any friends solution?
 

Edited November 19, 2019 by leonardombn

[Manson976]

Sorry have to get this of my chest...

Appreciate all the work that goes into making a loader, but  ONE thing I hate is why the F@#k does J-Config Never Ever recognise my 360 controllers properly no matter what I do..

First off for a long while now my inputs are all over the shop... the buttons don't match up (DPad Up is now X axis Apparently, B button is the Start button etc) You get my drift so I can't set it up properly I'm not the only one here..

Battle Gear 4  I Have No inputs at all!!!  I have to use the keyboard then X-Padder "What a Ball Ace!"

Here we are snowcross Start = Test

Top Right Button = Start

Now all my button input a recognised as only -y axis (I've tried many 360 controllers!)

Shame I can't set up a PS3 pad maybe it needs an alternative because J - Config never works for me..

May a patch fix??

 

 

Update: tried deleting the MiscInput

Now my triggers are button 5 and 6 keyboard inputs aint work so that option is ditched..

Edited November 19, 2019 by Manson976

[GamingRob]

10 minutes ago, Manson976 said:

Sorry have to get this of my chest...

Appreciate all the work that goes into making a loader, but  ONE thing I hate is why the F@#k does J-Config Never Ever recognise my 360 controllers properly no matter what I do..

First off for a long while now my inputs are all over the shop... the buttons don't match up (DPad Up is now X axis Apparently, B button is the Start button etc) You get my drift so I can't set it up properly I'm not the only one here..

Battle Gear 4  I Have No inputs at all!!!  I have to use the keyboard then X-Padder "What a Ball Ace!"

Here we are snowcross Start = Test

Top Right Button = Start

Now all my button input a recognised as only -y axis (I've tried many 360 controllers!)

Shame I can't set up a PS3 pad maybe it needs an alternative because J - Config never works for me..

May a patch fix??

 

 

Update: tried deleting the MiscInput

Now my triggers are button 5 and 6 keyboard inputs aint work so that option is ditched..

?

So you can't assign buttons?

I use a generic 360 controller and it worked by just double clicking on the input I wanted to change and then press the button or move the stick I wanted to assign,

I checked 'Individual Left Analog' and under 'Settings' I unchecked both options.

Controls are working perfectly fine for the game.

However, I needed to choose DInput, as otherwise the game crashed on pressing the start button.

[Manson976]

4 minutes ago, GamingRob said:

?

So you can't assign buttons?

I use a generic 360 controller and it worked by just double clicking on the input I wanted to change and then press the button or move the stick I wanted to assign,

I checked 'Individual Left Analog' and under 'Settings' I unchecked both options.

Controls are working perfectly fine for the game.

However, I needed to choose DInput, as otherwise the game crashed on pressing the start button.

i KNOW ..

It has never worked for me on my end since the Type X days and thats been 3 different rigs with a 360 pad...

What I use to do was copy past a profile of a user here.. BRUCE or WOLF and paste it into each fighting game for example.

I just think personally it's buggy because Teknoparrot or T Input they all recognised my pads so do most loaders and PC games..

 

I can assign them it its not matched up correctly like button start is button B you get me?

Edited November 19, 2019 by Manson976

[leonardombn]

hace 12 horas, teknikmans2 dijo:

try this file!

d3d8to9.7z

I tried and it didn't work

[GamingRob]

7 minutes ago, Manson976 said:

i KNOW ..

It has never worked for me on my end since the Type X days and thats been 3 different rigs with a 360 pad...

What I use to do was copy past a profile of a user here.. BRUCE or WOLF and paste it into each fighting game for example.

I just think personally it's buggy because Teknoparrot or T Input they all recognised my pads so do most loaders and PC games..

 

I can assign them it its not matched up correctly like button start is button B you get me?

Yes, now I got you. Sorry, I couldn't imagine your situation.

And unfortunately I have no idea how to resolve the problem.

[Guest claymanred01]

3 hours ago, Manson976 said:

Sorry have to get this of my chest...

Appreciate all the work that goes into making a loader, but  ONE thing I hate is why the F@#k does J-Config Never Ever recognise my 360 controllers properly no matter what I do..

First off for a long while now my inputs are all over the shop... the buttons don't match up (DPad Up is now X axis Apparently, B button is the Start button etc) You get my drift so I can't set it up properly I'm not the only one here..

Battle Gear 4  I Have No inputs at all!!!  I have to use the keyboard then X-Padder "What a Ball Ace!"

Here we are snowcross Start = Test

Top Right Button = Start

Now all my button input a recognised as only -y axis (I've tried many 360 controllers!)

Shame I can't set up a PS3 pad maybe it needs an alternative because J - Config never works for me..

May a patch fix??

 

 

Update: tried deleting the MiscInput

Now my triggers are button 5 and 6 keyboard inputs aint work so that option is ditched..

Few things, Jconfig is exclusively tested with 360 pads, both wired, and wireless

 

There are 2 modes of opperation, 

Xinput, and Dinput, 

Since the Gui. is reused for all our builds it is not always clear if a game supports both of them 

however you must select your mode, and save the config, then rebind your keys 

 

So if you would like to use Dinput , select Dinput, save, then bind keys and save, or the reverse with xinput

The reason for this is the button order is different for Xinput and Dinput, as Dinput mode supports analog triggers, instead of treating them as additional buttons 

[EmuAl]

i have dinput working great on all jconfigs including snocross, no problems recognising buttons or anything, might be worth getting a dinput pad instead of xinput see if it works for you 

[arcade_power]

I'd like to recommend the Logitech F710 gamepad, as it has a switch for for Xinput & DInput. I bought one a while back, and to me it's a better choice than an Xbox 360 controller. 

 

[joeplay]

hace 16 horas, EmuAl dijo:

just played Snocross for 20 odd minutes with no real issues at all great stuff... well done Flybit 

 

only problem i had was entering my name  can't land on the M at all  

 

The game works perfect except for some error in the image when the girls appear before starting the race, otherwise everything is perfect .

Many thanks to the developers of jconfig !!!

[Manson976]

6 hours ago, claymanred01 said:

Few things, Jconfig is exclusively tested with 360 pads, both wired, and wireless

 

There are 2 modes of opperation, 

Xinput, and Dinput, 

Since the Gui. is reused for all our builds it is not always clear if a game supports both of them 

however you must select your mode, and save the config, then rebind your keys 

 

So if you would like to use Dinput , select Dinput, save, then bind keys and save, or the reverse with xinput

The reason for this is the button order is different for Xinput and Dinput, as Dinput mode supports analog triggers, instead of treating them as additional buttons 

I will test another pad soon as using the keyboard works as I said flawless so I don't know what's up with my 360 device if there is even a problem..

 

[arcade_power]

1 hour ago, joeplay said:

 

The game works perfect except for some error in the image when the girls appear before starting the race, otherwise everything is perfect .

Many thanks to the developers of jconfig !!!

yeah but the game only runs perfect for those running it on older Windows versions such as 1803, or those who runs it on Win 7 machines. The rest of us who use Win 10 (1903 or newer) it will crash after finishing a race, along with other issues.

[EmuAl]

I am on latest win 10 and it doesn’t crash

 

 

[braders1986]

17 hours ago, braders1986 said:

Evening, gents.

 

Would anyone kindly tell me how to disable 3D Mode on Let's Go Island 3D when playing via Jconfig.

 

 

 

Quoting myself as it got lost, and ignored on the last page.

[arcade_power]

40 minutes ago, EmuAl said:

I am on latest win 10 and it doesn’t crash

 

 

That's very odd, since it does crash for most people using latest Win 10, at least for those using Nvidia cards Some people are very lucky I guess. 

 

Edited November 19, 2019 by arcade_power

[LEGEND80]

I'm on 1803 and it crashes after race always as well as general instability on bike select, race load and in race sometimes. I'm nvidia, so maybe it's an nvidia thing.

[sebamiga57]

Salut tout le monde,

 

Sous Windows 7, le jeu plante et reviens sous windows après la sélection de customize (avec la dll d3d8to9 cela ne change rien)

 

J'espère qu'il y aura un fix rapidement

 

@ plus

 

Séb

[Manson976]

I tried dxwnd, voodoo and compatibility to no avail it just crashes randomly on newer versions of windows :(

 

[leonardombn]

hace 10 horas, arcade_power dijo:

That's very odd, since it does crash for most people using latest Win 10, at least for those using Nvidia cards Some people are very lucky I guess. 

 

 

Exactly, I'm using version 1903 + GTX970 and it really hangs.

[arcade_power]

1 minute ago, leonardombn said:

 

Exactly, I'm using version 1903 + GTX970 and it really hangs.

Almost same here, but GTX 960 and Win 1903. We're doomed!

[leonardombn]

hace 1 hora, arcade_power dijo:

Almost same here, but GTX 960 and Win 1903. We're doomed!

 

I have been testing again, and now it worked but crasha all the time, is inconsistent, ends at the end of the race or in the middle of the game.