Jump to content
7zxkv

idMacX + J/Rconfig + JVSemu + SpiceTools + BemaniTools + SegaTools + etc.

Recommended Posts

5 minutes ago, GamingRob said:

I wish I could say the same.

Maybe it's a NVidia problem (you seem to have an AMD card)?

Yes i have a Nvidia gt1030 2gb ddr5, 16gb memory.

 

Share this post


Link to post
Share on other sites

I have the same problem with Storm G and I play with a intel 530!

 

Edit:

 I just saw in the second window, while the game is playing, that there is an error "dx9 surface copy"

Maybe it can help...

Edited by maxbartop

Share this post


Link to post
Share on other sites

@GamingRob

my config
Win10 x64 version 20H2 (OS Build 19042.867)
CPU Ryzen 5 2400G
GPU RX Vega 11

 

has also been tested on GTX 660 and works well :very-good:

 

for NVIDIA users, install this program to solve the problem

Hidden Content

    Give reaction or reply to this topic to see the hidden content.

Share this post


Link to post
Share on other sites
58 minutes ago, CiTrON said:

works fine for me

srg.jpgthis is what i got so im assuming this is as far as we can go for right now for full screen =)

 

Share this post


Link to post
Share on other sites
il y a 22 minutes, CiTrON a dit :

@GamingRob

my config
Win10 x64 version 20H2 (OS Build 19042.867)
CPU Ryzen 5 2400G
GPU RX Vega 11

 

has also been tested on GTX 660 and works well :very-good:

 

for NVIDIA users, install this program to solve the problem

Hidden Content

    Give reaction or reply to this topic to see the hidden content.

Not work at all :/

Share this post


Link to post
Share on other sites
37 minutes ago, CiTrON said:

@GamingRob

my config
Win10 x64 version 20H2 (OS Build 19042.867)
CPU Ryzen 5 2400G
GPU RX Vega 11

 

has also been tested on GTX 660 and works well :very-good:

 

for NVIDIA users, install this program to solve the problem

Hidden Content

    Give reaction or reply to this topic to see the hidden content.

Already have wmv9VCM installed on my computer it does not fix the problem.

Share this post


Link to post
Share on other sites
38 minutes ago, CiTrON said:

@GamingRob

my config
Win10 x64 version 20H2 (OS Build 19042.867)
CPU Ryzen 5 2400G
GPU RX Vega 11

 

has also been tested on GTX 660 and works well :very-good:

 

for NVIDIA users, install this program to solve the problem

Hidden Content

    Give reaction or reply to this topic to see the hidden content.

Thanks, but the program is for fixing the attract mode.

The graphics problem is in the race.

When I start the game with Teknoparrot all works.

But the JConfig version would be superior, as you can see your time at the end (even it disappears quite fast).

00.jpg

Share this post


Link to post
Share on other sites
vor 22 Minuten schrieb GamingRob:

Thanks, but the program is for fixing the attract mode.

The graphics problem is in the race.

When I start the game with Teknoparrot all works.

But the JConfig version would be superior, as you can see your time at the end (even it disappears quite fast).

00.jpg

Same problem here with Nividia GTX 1070ti.
Anyone knows how to fix this?

Share this post


Link to post
Share on other sites

works for me on Windows 10-Nvidia GTX 760. But I have random crash during the race (before lap 1 usually) and quite often when drifting.

needs more fix I think...

WM drivers installed.

 

+

Share this post


Link to post
Share on other sites
3 ore fa, CiTrON ha scritto:

JConfig Storm Racer G
TNMnauX.jpg

 

Hidden Content

    Give reaction or reply to this topic to see the hidden content.


Storm Racer G emulated!!!
first version just to play

- Experimental Forcefeedback added (DInput Only)

 

special thanks to FlyBit (JConfig developer)

windows7: error xinput1_4.dll

jconfig SRG for windows7??????

thanks

Share this post


Link to post
Share on other sites

Not working for me using Nvidia GTX970, i5 6600k, 16g ram. It has the same garbled graphics as above. Thank you.

Share this post


Link to post
Share on other sites

00.jpg

 

People with the same problem as in this image above, enter the menu by pressing the 7 key, go to graphics and disable the msaa option.

 

605e4ab8b3d41_Semttulo.png.6014ed100df487637ebf0b8b0f8c0232.png

Share this post


Link to post
Share on other sites
vor 17 Minuten schrieb sk8t:

00.jpg

 

People with the same problem as in this image above, enter the menu by pressing the 7 key, go to graphics and disable the msaa option.

 

605e4ab8b3d41_Semttulo.png.6014ed100df487637ebf0b8b0f8c0232.png


Awesome man, that worked, thanx a lot :bravo:

Share this post


Link to post
Share on other sites
il y a 40 minutes, sk8t a dit :

00.jpg

 

People with the same problem as in this image above, enter the menu by pressing the 7 key, go to graphics and disable the msaa option.

 

605e4ab8b3d41_Semttulo.png.6014ed100df487637ebf0b8b0f8c0232.png

 

Works on intel too! Great man, thanks!

 

But unfortunatly it doesn't save the change when you reload the game.

Share this post


Link to post
Share on other sites
2 hours ago, ercolino2004 said:

windows7: error xinput1_4.dll

jconfig SRG for windows7??????

thanks

Hey ercolino2004,

Not sure if this will work, but you can try this: 

 

Share this post


Link to post
Share on other sites

Hello Everyone,

 

I  am running Storm Racer G on both Teknoparrot Patreon and on J-Config experimental launcher created by FlyBit. 

 

Let begin with addressed issues for some users whom cant launch Storm Racer G using J config for the below reason:

 

Issue address :  Cannot launch - xinput_1.4. dll is missing .

 

Debugging the issue : xinput_1.4.dll is a set of dll files embedded  starting windows 8 and above. Basically All win 7 users will have problems launching steam games or other utilizing this file.

 

Resolution : 

- Download Xinput_1.3.dll 32 bits version and extract this file to the bin folder of SRG after you have extracted Jconfig and usb_io.dll into the same bin directory and extracted the save file from assets into SRG/assets/ replace savefile.dll.  (better to backup the original in case you would like later on to use in TP). 

 

N.B : This is very important , Do not map the controls in Jconfig before extracting the xinput_1.3.dll  and renaming it to xinput_1.4.dll. 

 

After successfully completing this step, open J config in order to map the controls . 

 

Before mapping the controls , if the game crashes upon launch you might be better  by disabling the Direct3d9 wrapper .

 

-If you are using the xinput joystick, please select xinput from the drop down list.

If you are using Direct-input or Logitech wheels, make sure to set as below:

- Enable POVsends AxisXY

- Enable for Analog

- Do not select Fake steering or pedals.

- In order to map buttons  such as start, coins ,test , boost , up and down , exit. make sure to set in logitech profiler to combined settings.

- In order to map left /right steering analog and pedals x and Y , remove the combined first.

 

Trivia,

-On my testing , when selecting force feedback in the settings of Jconfig, this will cause no controls to be hooked to game upon launch . I advise to keep it deselected. (Ofcourse you can try it yourself, each user can have things work for him/her differently.)

 

Issues in Jconfig :

-Brake is inverted . It works , but when releasing the gas , the car auto brakes and drives backwards. Couldn't find a fix

-Boost/nitro can only be mapped to analog input. (update: IT works but when only mapped to an analog shifter " Does not work with g27/20 shifters. Ca be mapped to another hooked flight simulator joystick)

-Auto/ Manual Drifting selection Panel in the selection screen is missing .

-The game slows down on occasional courses . (Disregard)

-Force feedback seems not to work on Logitech wheels in win7. Others try on Win 10 to see if it is possible.

Enjoy for now.

 

 

Edited by naderkadd1981

Share this post


Link to post
Share on other sites
1 hour ago, sk8t said:

00.jpg

 

People with the same problem as in this image above, enter the menu by pressing the 7 key, go to graphics and disable the msaa option.

 

605e4ab8b3d41_Semttulo.png.6014ed100df487637ebf0b8b0f8c0232.png

is their a way to find the debug file to change this option off in the file and save it there?

Share this post


Link to post
Share on other sites

I crash in the menus too, but if you are fast you can change the value... use W to open and close the debug menu and get to MSAA setting.  

 

Storm Racer G default keys. 

I tested the keys without setting them up in Jconfig... This is what happens with each key. 

You can open the Debug menu while racing and turn msaa off after starting race. 

 

IN GAME

shift, P, 0, F1 - insert coin

1, F2, Q, W - Arcade Operator Menu

7, F8, W - Debug Menu - W,F8 closes Debug Menu

+, PGDown, [, ESC, F12 - exit game/crash?

 

Operator Menu 

F1, 0, P, Shift - Exit Arcade Operator Menu

F12, +, [  - Exit game/crash?

Backspace - Down

E - Left

F - Up

G - Right

H - Down

 

Debug Menu

F1, P, Shift - insert coin

F2,Q - Arcade Operator Menu

F8, W, [ - Close Debug Menu

F12 - Exit game/crash?

F - Up

H - Down

E - Left

G - Right

Enter, M - expand menu

 

 

 

Edited by maabus

Share this post


Link to post
Share on other sites

Has anyone gotten LAN VS for Storm Racer G working ? Cant seem to find a way to set Machine ID or Turn network on. If someone got LAN working please post what you did to get it working.

 

when it comes to controls using Jconfig
If I click on combined axis and map controls in Jconfig for G27 everything works execpt the start button. I can insert credits ect. However for the start button to kick in I have to run the game Windowed so I can turn the combined axis checkbox on and the game presses start by itself. If I click the combined checkbox off again when the game has started all other controls work like they should, wheel,  pedals, coin, view change, boost. So It seems like the problem is that the start button is always held in if combined axis is off, and is always out and cant be pressed if combined axis is on.

Edited by bestekar

Share this post


Link to post
Share on other sites

Work fine on Windows 10 with compability win 7 and xbox one controller

Only need to remove MSAA on setting

 

Big thank's to the JConfig Team for have do Jconfig for this game 

without your great work we can still wait a very long time before we can play this game

Share this post


Link to post
Share on other sites

Turning off MSAA works fine, but when I do it and close the debug menu, the debug menu keeps popping up at the start of every race and on the results screen, which is mildly annoying.

Any idea how to fix this?

Share this post


Link to post
Share on other sites
1 ora fa, soso92 ha scritto:

Work fine on Windows 10 with compability win 7 and xbox one controller

Only need to remove MSAA on setting

 

Big thank's to the JConfig Team for have do Jconfig for this game 

without your great work we can still wait a very long time before we can play this game

Excuse me how can i remove this problem in graphich settings? What test menu?

Share this post


Link to post
Share on other sites
il y a 33 minutes, Rex2573 a dit :

Excuse me how can i remove this problem in graphich settings? What test menu?

In the menu game after put credit presse 7 on your keyboard you see a menu and turn off option Msaa and press again 7

And play

 

I see in test mode it's possible ti activate infinite boost its working good. 

 

What I'm trying to disable is the blur effects when you activate the boost

Edited by soso92

Share this post


Link to post
Share on other sites
19 minuti fa, soso92 ha scritto:

I see in test mode it's possible ti activate infinite boost its working good. 

 

wheres this option

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×