JustinCredible81

You turned into a douche archive.org is a HUGE website there's not one page that it's easy to search for things. I DID search there and I have multiple bookmarks from there. If you knew about those pages you should shared them in the first place otherwise you didn't know just like I didn't. Use some sense. There was zero reason to rub it in my face but screw you don't interact with me anymore.

I'm not searching for any, I just said they're difficult to find. But I found ToeJam & Earl III and Midtown Madness 3 on this forum called nextgenroms.com and I think that's the only place on the entire internet that has either one.

I have those archive.org pages bookmarked and it's not there not the PAL version only NTSC, but I don't see any post from you showing a link on this thread. Most of the time, nobody cared about USA vs PAL on Xbox because if your Xbox was hacked it could play any regions.

OIC, some of these PAL ISOs are getting very difficult to find on the internet. I know for ToeJam & Earl III I had to find some forum I had never heard of nextgenroms where someone just happened to post it a few years ago if not AFAIK it wouldn't exist on the internet at all. And that includes ByAlvro, downloadgamexbox etc... PAL version wasn't there only USA.

Figured out how to convert PAL DVD-9 to folder than standard ISO and it worked. Only PAL works.

Does anyone know why I can't get Midtown Madness 3 to load. I tried downloading every version I could find but I don't think I was able to find PAL version on the internet at all, and I think I have all the sites that have Xbox ISOs except maybe torrents which I don't use. I tried converting with DVDMulleter and QWIX and patched the xbe, but it just stays at loading screen . I just tried Backgamons new version too but it made no difference. The only PAL version I could find the ISO is like 6 gb does anyone know how to convert it to regular ISO? It wont work in Xemu.

Fixed it, the xbox_hdd.qcow2 seems to get corrupted or something. I had to replace it again and I can get past that door.

ToeJam & Earl III the xemu site says playable but I tried USA and PAL you collect 5 keys then enter the first door and it black screens. I would love it if someone else could try it but I doubt anyone cares about that game but me. I know how to find both USA and PAL there's only one place on the internet that has the PAL version that I know of if you are interested in trying it. PAL: https://mega.nz/file/CltTybDR#APf19i9G6oFn_0yat4yvLxFHKg5SfI41e1FYrZJ1hlw (zip password MobCat@nextgenroms.com) USA: https://1fichier.com/?pssvma19sl (Enter password ByAlvro) You have to convert the ISOs to Folder using QWIX or XDVDMulleter

Is Crash Bandicoot It's About Time working on any switch emulators yet?

Wonder if it will have Denuvo?

It's been this way for about 2 years and no fix.

Is Ollie King capable of working on any Xbox emulator.

Ok I did just stumble across a Chihiro game that I want, that I never knew existed until today. Ollie King made by makers of Jet Set Radio. Is it possible to emulate on any Xbox emulator?

Thanks, I'm pretty much set though I have an RGH 360 that has most of my original Xbox games on it, but ToeJam and Tao Feng never worked for it I tried for years even doing hex edits and things but never worked and now today I finally got to work on PC. I'm giving my original Xbox that's hacked away to a friend because those were the only two reasons I kept it.

I did try qwix it did the same thing but I asked on github got an immediate answer to try a different xbox hdd image and it fixed it.

No biggie, Im happy right now I had my original Xbox hooked up for two games now they're working on PC. In addition to this, you need to know more about it. I am however getting a black screen on ToeJam after boot screen and it was just working. Not sure why.

I was never talking about chihiro nor did I use that word I have those games elsewhere I just wanted the emulator to work period.

I just got it to work! Booted Tao Feng Fist of the Lotus and ToeJam & Earl III the two games I couldn't get to work on my Xbox 360 RGH. Need folder format and convert with XDVDMulleter to ISO. Do not try to download already made ISOs they won't work. You don't need a dash and you do not need ftp. You only need a proper ISO. I did find some other bios though so maybe that is why others could still have problems if so let me know I'll upload the bios. This link helped me a lot if anyone has further issues https://forums.launchbox-app.com/topic/59105-tutorial-xemu-configuration/ 1. Check "Build / Rebuild an ISO"> Next 2. The top / left tab "Load local folder"> Browse> Select your game folder> OK> Next 3. Bottom option "Create standard XBOX 1 ISO (No XBE checks)"> Next 4. Check "Optimize for disk size"> Drop-down menu select "Small as possible"> Next 5. Click "Make ISO"> Select save location> Save In addition to this, you need to know more about it

Does xemu work with iso only no folder format? I can't load folder. I did just try ISO but the emulator just closes. I opened iso set it to open with xemu. I set the bios. Edit: I see now that the redump ISOs such as from archive.org don't work and you have to rebuild folder formater with XDVDMulleter, but it requires layout files and the site that had them were down. Does anyone have a solution?

No matter what I do it always crashes before a race. I put files in C: drive didn't help when I launch the game I get corrupted registry error and yes I did install the registry files and did move files to syswow64, tried xp2 compatiblity, with/without admin rights. Nothing works. And controller still isn't working even after correcting it from what ZX3000GT1 said. Guess it just won't work unless someone has any other advice.

Guess I have to give up on this one for now. I used joytokey to map buttons to my controller but it crashes before starting a race and makes my computer act all glitchy and I have to reboot. I don't have a bs computer either, I have a i5-9300H Nvidia GTX 1650 16 GB Ram 4.1 GHz that can play any PC game.

It was because I was using 1.1 1.0 works, just no gamepad yet. I tried both of these neither worked, entire default.inis pasted. What am I doing wrong? [joystick 0] name = keyboard InputRight = key SC_RIGHT InputLeft = key SC_LEFT InputGas = key SC_UP InputBrake = key SC_DOWN InputHorn = key SC_H InputHandBrake = key SC_SPACE InputShiftUp = key SC_A InputShiftDown = key SC_Z InputCycleCamera = key SC_C InputLookBehind = key SC_B InputReset = key SC_R InputCallBackUp = key SC_U InputCallRoadBlock = key SC_J InputCallCopter = key SC_N InputLookLeft = key SC_COMMA InputLookRight = key SC_PERIOD InputGear_Reverse = key SC_MINUS InputGear_Neutral = key SC_O InputGear_1 = key SC_1 InputGear_2 = key SC_2 InputGear_3 = key SC_3 InputGear_4 = key SC_4 InputGear_5 = key SC_5 InputGear_6 = key SC_6 [joystick 1] name = defaultPad LS Right = axis 1 LS Left = axis 0 RT = axis 4 LT = axis 5 Y = button 1 X = button 3 LB = button 4 RB = button 5 InputHorn = button 8 InputReset = button 6 InputShiftUp = button 2 InputShiftDown = button 0 InputLookBehind = button 3 InputCallBackUp = key SC_U InputCallRoadBlock = key SC_J InputCallCopter = key SC_N InputLookLeft = key SC_COMMA InputLookRight = key SC_PERIOD InputGear_Reverse =.key SC_MINUS InputGear_Neutral = key SC_O InputGear_1 = key SC_1 InputGear_2 = key SC_2 InputGear_3 = key SC_3 InputGear_4 = key SC_4 InputGear_5 = key SC_5 InputGear_6 = key SC_6 [joystick 0] name = keyboard InputRight = key SC_RIGHT InputLeft = key SC_LEFT InputGas = key SC_UP InputBrake = key SC_DOWN InputHorn = key SC_H InputHandBrake = key SC_SPACE InputShiftUp = key SC_A InputShiftDown = key SC_Z InputCycleCamera = key SC_C InputLookBehind = key SC_B InputReset = key SC_R InputCallBackUp = key SC_U InputCallRoadBlock = key SC_J InputCallCopter = key SC_N InputLookLeft = key SC_COMMA InputLookRight = key SC_PERIOD InputGear_Reverse = key SC_MINUS InputGear_Neutral = key SC_O InputGear_1 = key SC_1 InputGear_2 = key SC_2 InputGear_3 = key SC_3 InputGear_4 = key SC_4 InputGear_5 = key SC_5 InputGear_6 = key SC_6 [joystick 1] name = defaultPad LS Right - axis 1 LS Left - axis 0 RT - axis 4 LT - axis 5 A/B/X/Y - button 0/1/2/3 LB/RB - button 4/5 Back - button 6 Start - button 7 LS Button - button 8 RS Button - button 9 Do I need to rename defaultpad to my gamepad? Or am I entering the buttons on the default.ini incorrectly? Although just copying ZX3000GT1's default.ini didn't work either.

I just did that but it crashed afterwards now it just crashes everytime I launch it. Edit: Tried to reextract and start with a fresh copy did the same thing pressed x and crashes again. And I did follow the installation instructions fully.

I was wondering why is it 7zip I thought mame only ran .zip?

I copied this to correct location but still can't do anything on this screen. I tried editing myself but didn't work either. Probably doing it wrong. Using 360 controller. Don't have an Xbox One controller don't know if that's why or I'm doing it wrong. I've tried several things but this is what I made the default.ini last and nothing's worked. See upload. defaults.ini