Jump to content

[Emu] PCSX2 v2.2.0 / 2.3.XXX DEV - émulateur PS2 sur PC (HD/4K)


Recommended Posts

Posted (edited)

need help to increase fps setting for time crisis 3  it is lagging bad is there any best settings for pcsx2 for time crisis 3?

 

current specs decent not good but not bad also 

AMD A8 6600K ,GTX 1050Ti 4GB ,10 gb ram  it can play final fantasy 15 windows edition and nier automata at medium to low settings at 30 - 48 fps with no issues.

but lagging bad in time crisis 3 pcsx2.. is there a best setting for time crisis 3?
 

 

Edited by Tokyo/Manila
Posted (edited)

Which version of PCSX2 you are running?

 

Here it works good with v1.7, it needs only OpenGL HW as video renderer, check Enable HW Hacks and check then Auto Flush and Align Sprite.

 

 

CHEERs

 

Edited by nohero
  • 2 months later...
Posted (edited)

I have a problem with only Capcom vs SNK 2, it's not centered as you can see in the picture it's black on the left side and there is a part of the screen missing on the right side. Tried changing resolutions and everything nothing worked. I just decided to add the Dreamcast version and use Flycast unless someone has a fix for PCSX 2 the resolution seems to be better on PS2 so I still prefer PCSX 2. 

 

untitled-png.227888

 

Edit: solved the above problem by using 640 x 480, I guess higher resolutions caused the problem. 

 

The other problem I have with certain games such as Time Crisis 3 is these horrible lines can't get rid of them. I have a GTX 1650. 

 

Untitled.png.56e7293a39f00955e1abef30cf292bff.png

 

I did fix the lines or at least reduce them with align sprite but it stilll doesn't look right like very pale washed colors in Time Crisis 3. Just looks bad to my eyes.

 

Untitled.png.2571521133a5082ef818f7b84e2b00df.png

Edited by JustinCredible81
Posted (edited)

@JustinCredible81

 

here it runs without lines.

 

Try these settings in video plugin :

- OpenGL Hardware

- Bilinear ( PS2 )

- Allow 8-bit Textures ( check )

- Large Framebuffer ( check )

- Mipmapping Full ( Slow )

- CRC Hack Level Full ( Direct3D )

- Enable HW Hacks ( check )

- Auto Flush ( check )

- Align Sprite ( check )

Edited by nohero
Posted

in powerdrome, no matter what settings I choose i always have those vertical lines, any fix ?

Capture.PNG

  • 1 year later...
Posted

Hello would anyone be able to assist with setting up police 24/7 with a sinden lightgun and also virtua cop elite edition - I can play the game but cannot seem to navigate in the menus to play virtua cop 2 !  Thanks for any help out there !!!

Posted (edited)

some incredibly 'Clean' images there for the ps2 emu ' Backgamon ' , I went back to this site recently   https://www.emucr.com/2009/03/emu-v101-200309.html

since 2009 is when I started using it, been unbelievably good over the years for all emulators. winuae 1 of the main stays but also the early  PCSX2

and rpcs3 especially but pc engine etc etc .. supermodel etc ..

but its amazing this emu ' EMU v1.01' (03/20/09)  is released. EMU  emulates Apogee, Bashkiria-2M rom, Bashkiria-2M disk, BK-0010, BK-0010_01, BK-0010fdd, Irisha, Korvet, Lik, Lik2, Lvov, Mikro-80, Mikrosha, Mikrosha (cas), NuPogodi, Orion -128, Orion-128 Z80 HDD, Orion-128z80-Card-ll, Orion-Pro, Orion-Pro 2, Partner, PK-6128c, PK8000 KDOS, PK8000 Sura and Xobbi, PK8000 Sura and Xobbi (cas), PK8000 Vesta , PK8000 Vesta (case), Radio-86RK, Radio-86RK (case), Radio-86RK 4K, Radio-86RK color, Radio-86RK ordos, Radio-86RK romdisk, Specialist, SpecialistMX, SpecialistRamfos, Spektr-001, UT88, UT88 (case), Vector06c, Vector06c-z80, Vector-1200, Vesta, Vesta (case), ZX Spectrum 128, ZX Spectrum 128 (case) ZX Spectrum 48 and ZX Spectrum 48 (case). could do all this

Edited by Cool Coyote
Posted (edited)
On 11/9/2021 at 1:27 PM, atrain9 said:

Hello would anyone be able to assist with setting up police 24/7 with a sinden lightgun and also virtua cop elite edition - I can play the game but cannot seem to navigate in the menus to play virtua cop 2 !  Thanks for any help out there !!!

 

The last I checked Police 24/7 cannot be played with any lightgun. The reasons are it used a special webcam and didn't use Guncon 2 like most lightgun games on PS2. 

 

Edit: it seems it is possible to buy a webcam to make it work on an actual PS2 if you can still find one of the webcams, but still to my knowledge you can't use PCSX 2 and use a lightgun

 

http://forum.arcadecontrols.com/index.php?topic=161966.0

 

Edited by JustinCredible81
Posted
On 11/13/2021 at 3:31 AM, JustinCredible81 said:

 

The last I checked Police 24/7 cannot be played with any lightgun. The reasons are it used a special webcam and didn't use Guncon 2 like most lightgun games on PS2. 

 

Edit: it seems it is possible to buy a webcam to make it work on an actual PS2 if you can still find one of the webcams, but still to my knowledge you can't use PCSX 2 and use a lightgun

 

http://forum.arcadecontrols.com/index.php?topic=161966.0

 

Thanks ! 

Posted
On 09/11/2021 at 7:27 PM, atrain9 said:

Hello would anyone be able to assist with setting up police 24/7 with a sinden lightgun and also virtua cop elite edition - I can play the game but cannot seem to navigate in the menus to play virtua cop 2 !  Thanks for any help out there !!!

 

Game was also playable with a mouse - In the past managed to get it to work using Nuvee plugin and a Wiimote emulating a mouse - So might be possible with a Sinden as well. Wasn't a great experience, but that might have been because using a wiimote - far better on actual PS2 so didn't waste much time on it.

Had to use PCSX2 version 1.6 rather than the dev build of Version 1.7

In theory might be possible with the Dev build as setting that up to use a mouse in game seems to work, but as the Wiimote emulates a mouse PCSX2 doesn't recognise it as it uses rawinput, whereas I think that Sinden might actually be recognised as a system mouse so could work.

Good luck with it

 

Posted
On 15/11/2021 at 5:20 AM, atrain9 said:

Thanks ! 

use the arcade version its more apt and better use model 2  'multicpu.exe'

 

Posted
On 11/16/2021 at 7:22 AM, Tiberius said:

 

Game was also playable with a mouse - In the past managed to get it to work using Nuvee plugin and a Wiimote emulating a mouse - So might be possible with a Sinden as well. Wasn't a great experience, but that might have been because using a wiimote - far better on actual PS2 so didn't waste much time on it.

Had to use PCSX2 version 1.6 rather than the dev build of Version 1.7

In theory might be possible with the Dev build as setting that up to use a mouse in game seems to work, but as the Wiimote emulates a mouse PCSX2 doesn't recognise it as it uses rawinput, whereas I think that Sinden might actually be recognised as a system mouse so could work.

Good luck with it

 

I will try that and see ! Fingers crossed Thanks !!

  • 4 weeks later...
Posted (edited)

Is there a way now to switch to software mode for FMV now that build 1.70 has removed it was good for games like baulders gate 2

Edited by joe555
  • 3 months later...
Posted

hey ! sorry to butt in...

 

my time crisis 3 on pcsx2 has no crosshair... just the mouse cursor so i am really just using the cursor to know where to shoot...

 

how do i activate the gun crosshair...? thank you ! 

  • 9 months later...
Posted

looks like no one has posted here for a long time ...

last year has been a really good year for ps2 emulation ..pcsx2 got tons of updates ..

 

a lot of fixed bugs and features added and I think ppl should update to the latest qt nightly build ....or at least create a portable latest version folder beside  the older version ...they won't be disappointed .

of course a lot of ppl know that vulkan is now added .. and right now it's really stable .. basically has all the advantages of opengl (with all the graphical bugs fixed in a lot of games) and it's way faster and performance wise it's close to directx

so ppl can now get the best of both worlds ..

the new gui is amazing ..it's basically just like duckstation ..easy to use and we can easily make per-game configuration which is a big deal for pcsx2 ..because a lot of games need hacks to run correctly .

and at the same time they keep updating the automatic fixes db to make life easier for everybody .

and finally they added a native guncon option ...so a mouse or a gun can easily be used to play all the gun games .. and most of them run great .

 

  • The title was changed to [Emu] PCSX2 v1.6.0 / 1.7.4X DEV - émulateur PS2 sur PC (HD/4K)
Posted
Il 26/1/2023 at 10:26, mamefan2018 ha scritto:

looks like no one has posted here for a long time ...

last year has been a really good year for ps2 emulation ..pcsx2 got tons of updates ..

 

a lot of fixed bugs and features added and I think ppl should update to the latest qt nightly build ....or at least create a portable latest version folder beside  the older version ...they won't be disappointed .

of course a lot of ppl know that vulkan is now added .. and right now it's really stable .. basically has all the advantages of opengl (with all the graphical bugs fixed in a lot of games) and it's way faster and performance wise it's close to directx

so ppl can now get the best of both worlds ..

the new gui is amazing ..it's basically just like duckstation ..easy to use and we can easily make per-game configuration which is a big deal for pcsx2 ..because a lot of games need hacks to run correctly .

and at the same time they keep updating the automatic fixes db to make life easier for everybody .

and finally they added a native guncon option ...so a mouse or a gun can easily be used to play all the gun games .. and most of them run great .

 

I agree with you.
I also managed to get the aimtrak working and the graphics are much better than in the original playstation

  • 2 months later...
Posted

I have tested PCSX2 1.7 with mouse support the following games and all of them are working with mouse:

-Police 24/7

-Silent Scope

-Silent Scope 2

-Silent Scope 3

 

But the gameplay with aimtrak is impossible, the movements are sooooo sensitive and it is unplayable.

Does someone have corrected this?

I tried to configure mouse sensivity in emulator with no effect.

I tried to configure Guncon2 instead mouse HID and the cursor does not move ingame.

I tried with an ahk that reduces mouse sensivity and no luck.

Well, at least we can play with mouse

Posted

I tried with police 24/7, and I "succeed" with lightguns read as joysticks mapped as right analog. The problem is when you use this game with joystick or hid mouse, the pointer does not move instatly but have an speed that you can change in the ingame configuration, but even iif you set it the fastest, it's slow for a gun

  • 3 weeks later...
Posted

really hoping someone will make the "mouse patcher" working in the new pcsx2 versions. its the only way to play lightgun games without the epileptic flashes 

  • 6 months later...
  • 3 months later...
Posted
Le 08/05/2023 à 16:43, llll55 a dit :

really hoping someone will make the "mouse patcher" working in the new pcsx2 versions. its the only way to play lightgun games without the epileptic flashes 

hi

 

sory but with mouse patcher for police 24/7 don't works

  • The title was changed to [Emu] PCSX2 v2.2.0 / 2.3.XXX DEV - émulateur PS2 sur PC (HD/4K)
  • The title was changed to [Emu] PCSX2 v2.2.0 / 2.1.XXX DEV - émulateur PS2 sur PC (HD/4K)

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...