[Arcade PC] Chunithm NEW / + / Int. / Sun / ... (S3G@ ALLS)

[ritsuyamabuki03]

hello can someone help me how to configure this resolution? this is my first time installing and launching chunithm on my pc
this is the sun plus ver. but the resolution was too stretched out of my screen resolution

 

Edited November 23, 2024 by ritsuyamabuki03

[laflegge]

Hi all,

Looking to play chunithm with a controller (all bloody expensive).... any experiences with the 'rpunithm' over here?

That one seems slightly more afforable for me with still 190 Eur + 30 eur transport + unknown amount for customs

Edited November 25, 2024 by laflegge

[unilock]

On 8/2/2024 at 1:39 AM, taptaptap2023 said:

Sent you a message with invite to two groups. Not sure why people giving you so much shade for asking. Not the flex they think it is. 

Sorry to be one of those people, but could I get an invite too, please? ^^

[Scribbler]

Any Chunithm Verse posters?

[Bentoowo]

if yall want lumi plus join 1cc the invite link is in my contacts

[laflegge]

Is there already a way to connect to/setup a local server for Lumnious plus??

[laflegge]

How wide (in millimeters) is the touchpanel of a tasoller controller ?

The website only gives you the total width. It is for me to see if i can align the keys with my screen (> 32 inch) and if not what the deviation is.

 

Thanks for measuring for me

 

[hybir]

9 hours ago, laflegge said:

How wide (in millimeters) is the touchpanel of a tasoller controller ?

The website only gives you the total width. It is for me to see if i can align the keys with my screen (> 32 inch) and if not what the deviation is.

 

Thanks for measuring for me

 

 

The touchpanel of mine is about 46cm in length, matches very closely on a 32inch monitor, you'll have trouble on larger screens.

[laflegge]

7 hours ago, hybir said:

 

The touchpanel of mine is about 46cm in length, matches very closely on a 32inch monitor, you'll have trouble on larger screens.

Thanks. Hopefully with a tool like lossless scaling I can make the game 32 inch (with some black bars on the side) 

 

Edit: nope. How hard i try but my ultrawide will not cooperate sizing this game so that the toucharea is between 45 and 47 cm.

so tasoller is out (am not buying a 32 inch monitor 🙂 ).. perhaps rpunithm 

Edited December 19, 2024 by laflegge

[junniebabe]

Anyone know if a114 is out for luminous or luminous plus? I know we have most options for luminous plus, but I haven't seen that one yet

[Scribbler]

On 12/21/2024 at 6:52 AM, junniebabe said:

Anyone know if a114 is out for luminous or luminous plus? I know we have most options for luminous plus, but I haven't seen that one yet

What do you mean luminous OR luminous plus? You shouldn't be combining options from different versions.

Also, there's no such thing as A114 for luminous plus. It's A001 to A112. Regular luminous is A001 to A181.

[junniebabe]

14 hours ago, Scribbler said:

What do you mean luminous OR luminous plus? You shouldn't be combining options from different versions.

Also, there's no such thing as A114 for luminous plus. It's A001 to A112. Regular luminous is A001 to A181.

Sorry, I could have worded it better.

Im looking for omnimix for luminous plus, on older game versions it was a114, from sun plus on i think it's called AOLD. I'm not mixing options from other versions.

[laflegge]

On 12/27/2024 at 1:27 AM, Scribbler said:

What do you mean luminous OR luminous plus? You shouldn't be combining options from different versions.

Also, there's no such thing as A114 for luminous plus. It's A001 to A112. Regular luminous is A001 to A181.

 

Hi

perhaps you can help me.

In luminous I also have AKON, ALM1, AOLD, AOMN en AZEN

I already noticed that ALM1 is not right because that 1 song already exists in AZEN, but I must admit that -apart from AOMN- I have no idea where these came from. Probably some stupid copy mistake from my side or some remainder of older versions of Chunithm?

 

Then in Luminous plus I also have AOMN (the right version for L+) but for now outside the option directory I also have ALM1 (again?), ALP1 and ATUY but again do not know if I should delete them or put them in the option directory?

edit: for L+ I already found out the ALM1,ALP1 and ATUY can be deleted because songs are in other option file and A000

 

another edit: never mind. Found the answers elsewhere

 

Edited December 29, 2024 by laflegge

[Nelg44]

Controller help. I have slidershim running and see my key inputs on the top half of the program.

 

a) What do I set the output device too?

b) Do I need specific keys or to ";" out anything in particular in sega.ini?

c) Is there I0 dll's which are required? currently I have the brokenithm ones (3 of) in the app directory.

 

Brokenithm-Evolved - Android works fine

 

Any help would be appreciated

Edited January 4 by Nelg44

[Scribbler]

On 1/4/2025 at 9:24 AM, Nelg44 said:

Controller help. I have slidershim running and see my key inputs on the top half of the program.

 

a) What do I set the output device too?

b) Do I need specific keys or to ";" out anything in particular in sega.ini?

c) Is there I0 dll's which are required? currently I have the brokenithm ones (3 of) in the app directory.

 

Brokenithm-Evolved - Android works fine

 

Any help would be appreciated

Slidershim is normally used to make controllers work with games that aren't CHUNITHM. Is there any reason you're trying to use it when you already have Brokenithm-Evolved working?

If you REALLY want to use slidershim with CHUNITHM, you'll need to set the output to one of the keyboard modes. This should be the segatools.ini settings for Keyboard 32-zone, Tasoller Layout

 

[io3]
; Test button virtual-key code. Default is the F1 key.
test=0x70
; Service button virtual-key code. Default is the F2 key.
service=0x71
; Keyboard button to increment coin counter. Default is the F3 key.
coin=0x72
; Set to 0 for enable separate ir control. Deafult is space key.
ir=0

[ir]
; Uncomment and complete the following sequence of settings to configure a
; custom ir-cappable controller if you have one.
ir1=0xBF
ir2=0xBE
ir3=0xDE
ir4=0xBA
ir5=0xDD
ir6=0xDB

[slider]
; Enable slider emulation. If you have real AC slider, set this to 0.
; Slider serial port must be COM1.
;enable=1

; Key bindings for each of the 32 touch cells. The default key map, depicted
; in left-to-right order, is as follows:
;
;                   SSSSDDDDFFFFGGGGHHHHJJJJKKKKLLLL
;
; Touch cells are numbered FROM RIGHT TO LEFT! starting from 1. This is in
; order to match the numbering used in the operator menu and service manual.
;
; Uncomment and complete the following sequence of settings to configure a
; custom high-precision touch strip controller if you have one.
cell32=0x41
cell31=0x31
cell30=0x5A
cell29=0x51
cell28=0x53
cell27=0x32
cell26=0x58
cell25=0x57
cell24=0x44
cell23=0x33
cell22=0x43
cell21=0x45
cell20=0x46
cell19=0x34
cell18=0x56
cell17=0x52
cell16=0x47
cell15=0x35
cell14=0x42
cell13=0x54
cell12=0x48
cell11=0x36
cell10=0x4E
cell9=0x59
cell8=0x4A
cell7=0x37
cell6=0x4D
cell5=0x55
cell4=0x4B
cell3=0x38
cell2=0xBC
cell1=0x49

 

[Nelg44]

Yeeeww! Thanks for the help. I got it working! 

[woopie2]

why do I get a error code 0904 when running the game.bat (on chunithm luminous) and it is written cannot inizialise system module?

[Sebas]

Hi! Anyone know where to get working Tasoller DLLs for Chuni Liminous+. I have some that work with base Luminous but not with L+.

 

Thank you!

 

PS: I have the regular Tasoller not the Plus.

Edited April 27 by Sebas