Eryx Posted February 27, 2024 Posted February 27, 2024 so i did my research and i was in fact using fufubot segatools so i redid my segatools.ini just in case, i had some problem while debugging but now the game is launching better than ever, the aime card thingy is working well. my tasoller is now turning black when game is launching and get the right color when the game is on, if i emulate the aime card it even turned blue and red as it should be, but still no answer from the touch pad when i tap on it. i link the zip where i got the segatoolschusan-segatools_v1.0.3.1_by_fufubot_team.zip note that i also installed all the file in there i also link my segatools.inisegatools.ini just in case something is wrong. if you tell me eveything should work i'll go ahead and do the laborious install of the touchpad firmware with the special wire. once again thanks a lot for your help you're doing god's work
huangallen Posted February 27, 2024 Posted February 27, 2024 could anyone tell me whats wrong with it when i enter python dbutils.py create to install artemis and it doesnt have allnet connection to
Scribbler Posted February 28, 2024 Posted February 28, 2024 2 hours ago, huangallen said: could anyone tell me whats wrong with it when i enter python dbutils.py create to install artemis and it doesnt have allnet connection to 4 hours ago, Eryx said: so i did my research and i was in fact using fufubot segatools so i redid my segatools.ini just in case, i had some problem while debugging but now the game is launching better than ever, the aime card thingy is working well. my tasoller is now turning black when game is launching and get the right color when the game is on, if i emulate the aime card it even turned blue and red as it should be, but still no answer from the touch pad when i tap on it. i link the zip where i got the segatoolschusan-segatools_v1.0.3.1_by_fufubot_team.zip note that i also installed all the file in there i also link my segatools.inisegatools.ini just in case something is wrong. if you tell me eveything should work i'll go ahead and do the laborious install of the touchpad firmware with the special wire. once again thanks a lot for your help you're doing god's work your [vfs] is fucked, either put the directoy in "quotes" or just use relative paths. Looks like all your folders are inside the bin folder so just put amfs=amfs, option=Option, appdata=appdata
mmm7 Posted February 28, 2024 Posted February 28, 2024 4 hours ago, Eryx said: so i did my research and i was in fact using fufubot segatools so i redid my segatools.ini just in case, i had some problem while debugging but now the game is launching better than ever, the aime card thingy is working well. my tasoller is now turning black when game is launching and get the right color when the game is on, if i emulate the aime card it even turned blue and red as it should be, but still no answer from the touch pad when i tap on it. i link the zip where i got the segatoolschusan-segatools_v1.0.3.1_by_fufubot_team.zip note that i also installed all the file in there i also link my segatools.inisegatools.ini just in case something is wrong. if you tell me eveything should work i'll go ahead and do the laborious install of the touchpad firmware with the special wire. once again thanks a lot for your help you're doing god's work the segatools.ini file looks fine to me. I dont have any more idea, never seen this problem before. so your game boots to menu, you can scan in a card, the colors are all correct on the controller, but doesnt respond to inputs? honestly have no idea. maybe double check your 2 usb cables and try plugging the data cable in another USB hub (usb2 vs usb3), and plug the power usb cable into an actual power brick (if not already) 5 minutes ago, Scribbler said: your [vfs] is fucked, either put the directoy in "quotes" or just use relative paths. Looks like all your folders are inside the bin folder so just put amfs=amfs, option=Option, appdata=appdata the paths can have spaces, I have spaces in mine and my game works fine, this shouldnt be fking up the tasoller anyway
Eryx Posted February 28, 2024 Posted February 28, 2024 Il y a 5 heures, Scribbler a dit : your [vfs] is fucked, either put the directoy in "quotes" or just use relative paths. Looks like all your folders are inside the bin folder so just put amfs=amfs, option=Option, appdata=appdata Il y a 5 heures, mmm7 a dit : the segatools.ini file looks fine to me. I dont have any more idea, never seen this problem before. so your game boots to menu, you can scan in a card, the colors are all correct on the controller, but doesnt respond to inputs? honestly have no idea. maybe double check your 2 usb cables and try plugging the data cable in another USB hub (usb2 vs usb3), and plug the power usb cable into an actual power brick (if not already) the paths can have spaces, I have spaces in mine and my game works fine, this shouldnt be fking up the tasoller anyway Thanks for your answers i'll try différent stuff and Come back to you either to tell that i threw my tasoller against a wall or that a miracle occured. I'll do a backup and fuck around the files and USB cable, finally i'll update the touchpad. Thanks a lot nonetheless you really helped me a lot!
Scribbler Posted February 28, 2024 Posted February 28, 2024 48 minutes ago, Eryx said: Thanks for your answers i'll try différent stuff and Come back to you either to tell that i threw my tasoller against a wall or that a miracle occured. I'll do a backup and fuck around the files and USB cable, finally i'll update the touchpad. Thanks a lot nonetheless you really helped me a lot! How old is your Tasoller? If you bought it new when did you buy it? If it was purchased in 2022 or later then you shouldn't need to use a UART cable to flash the firmware. If it's older than that and still on Factory 1.0 firmware, then follow the DAO guide to get on 2.0 https://www.dj-dao.com/en/support/11.html If your Tasoller is newer (or after you've done the UART flash if it's older) grab the custom firmware files from here https://pixeldrain.com/u/v28yFBTZ There's a readme in the zip that'll tell you exactly what to do, with only the regular USB cables being required. You can use the fufubot segatools included with the custom firmware and it should just work in its default configuration, though I personally recommend using; segatools: https://gitea.tendokyu.moe/Dniel97/segatools/releases chuniio for tasoller: https://gitea.tendokyu.moe/Scribbler/chuniio-tasoller/releases and follow the instructions for the dlls herehttps://gitea.tendokyu.moe/Scribbler/chuniio-tasoller#configuration and as my user box to the left says, check my profile for useful links
huangallen Posted February 28, 2024 Posted February 28, 2024 sorry, the next question is i pass all the test but still cannot connect internet in the game i have done all the instructions in https://rentry.org/artemisscreenshots061223
Scribbler Posted February 28, 2024 Posted February 28, 2024 (edited) 24 minutes ago, huangallen said: sorry, the next question is i pass all the test but still cannot connect internet in the game i have done all the instructions in https://rentry.org/artemisscreenshots061223 I recommend you read what I wrote several times at the very top of that page. The errors claim the database doesn't exist. Follow the instructions on the Artemis git page, not the rentry page. https://gitea.tendokyu.moe/Hay1tsme/artemis/src/branch/master/docs/INSTALL_WINDOWS.md Use the MASTER branch for Chunithm, not the develop branch. Edited February 28, 2024 by Scribbler added git link
Iden Posted March 2, 2024 Posted March 2, 2024 I'm completely new to all of this, is there anyone with a guide on how to install chunithm sun plus on pc or like an already set up version of the game?
SnowAlutma Posted March 4, 2024 Posted March 4, 2024 I have read the texts and what not but does anyone have to link to this discord server I have been hearing and help me out to get started?
Razzer1 Posted March 4, 2024 Posted March 4, 2024 does anyone have chunithm sun plus, if preferably the full pack or either only the SDHD 2.10 or later?
Jaay Posted March 8, 2024 Posted March 8, 2024 On 1/22/2024 at 3:59 AM, TheKitBoi said: Data Collective Would it be possible to get an invite as well please?
TechaNinja Posted March 9, 2024 Posted March 9, 2024 Can someone provide me with a working Chu Sun Plus (with omnimix) or the discord invite, to get it? I only have base chu sun (and i dont think the options i added, worked). I was in hospital for a bit, minor operation all good went wel just takign it easy now. Having friends over in a couple days so would love to have that playable so we can just kinda chill. It's basically like a yay your op was successful and no issues, welcome back, kinda party.
nagaseiori Posted March 9, 2024 Posted March 9, 2024 It has a large delay when I play the Sunplus, even though I have set the delay at -2.0 (A and B). My PC has a worse delay than the real gaming machines. I am using a hand made pad with cable like tasoller. The seller said, theoretically there will be no delay. And I found a file named JudgeTiming.ini. If there is a possibility, I can set a suitable parameter so there will be no delay.
Subway Posted March 10, 2024 Posted March 10, 2024 On 1/22/2024 at 8:59 AM, TheKitBoi said: Data Collective May I also have an invite please?
Revrs01 Posted March 15, 2024 Posted March 15, 2024 does anyone have the complete chunithm sun plus? I click almost every link in the previous 50 pages, most of the links are down, can anyone share the file again ? Thanks
Emmuu Posted March 19, 2024 Posted March 19, 2024 On 1/22/2024 at 3:59 AM, TheKitBoi said: Data Collective Is there any possibility of getting an invite please.
darksabre9 Posted July 24, 2024 Posted July 24, 2024 2 hours ago, Bentoowo said: WHATS GOOD EMULINE I MISSED YALL!!!! same ngl, glad to see ya 1
Bentoowo Posted July 24, 2024 Posted July 24, 2024 (edited) also here emuline chunithm luminous data https://pixeldrain.com/u/6zKCMrjy Edited July 26, 2024 by Bentoowo 7
pensifir Posted July 24, 2024 Posted July 24, 2024 从我第一次接触中二游戏的那一刻起,我就知道自己找到了一个不可或缺的生活伙伴。每一音符的跳动、每一段旋律的律动,不仅是对我反应能力的挑战,更是一段深入五彩斑斓音乐世界的奇妙旅程。这款游戏不仅仅是娱乐的方式,它更是激发我灵感的源泉,帮助我在困难时刻找到力量和快乐。每当我面对生活中的挫折和挑战,音乐就像是一股温暖的力量,将我从阴霾中拉出来,让我重新找到前进的动力。 在游戏中的每一首歌、每一个关卡,都让我与音乐和内心深处的自己建立了更加深厚的联系。随着我不断进步,我发现自己不仅仅是在游戏中变得更强大,更是在生活中获得了更多的自信和勇气。这种音乐和游戏的结合,已经成为我日常生活中不可或缺的一部分,为我带来了无数的快乐和满足。它不仅是一种娱乐方式,更是让我生活变得更加丰富多彩、更有意义的重要部分。 因此,我想问问大家,有没有哪位好心人能够通过分享LUMINOUS PLUS来帮助我的生活变得更加美好?这个游戏不仅是我的爱好,更是我心灵的避风港。在那里,我能够忘却烦恼,找到内心的宁静。所以,我真诚地希望能够通过LUMINOUS PLUS来体验更多的音乐,继续这段充满魔力的旅程。如果有人愿意分享,我将非常感激,这将为我的生活增添无尽的欢乐和感动。
chokooo Posted July 24, 2024 Posted July 24, 2024 wow it's been a crazy long time. anyone know what happened to the site?
nosoucy62 Posted July 26, 2024 Posted July 26, 2024 Le 24/07/2024 à 20:31, chokooo a dit : wow it's been a crazy long time. anyone know what happened to the site? bug informatique
kuu124 Posted July 26, 2024 Posted July 26, 2024 (edited) chunithm-premium-freeish.dll How do I use this? Edited July 27, 2024 by kuu124
taptaptap2023 Posted July 28, 2024 Posted July 28, 2024 (edited) I have Luminous working as guest mode, using AquaDX remote, and I am unable to create a new save file. When I first tried to create a new save, I accessed some other player's save file (we used the same 20 digit aime). When I changed the 20 digit number in aime.txt and try to create a new account, I get this error: I tried several different 20 digit values but I always get this error unless I use the values that belong to the other player. Any advice on what I should try? EDIT: Found the issue! Just had to go to the service menu and make some changes. Edited September 11, 2024 by taptaptap2023
John78947324 Posted July 28, 2024 Posted July 28, 2024 Welcome back,emuline. Does anyone know the best version of Aqua to run Luminous? ver0.0.44 was not work.
MXDrako Posted July 28, 2024 Posted July 28, 2024 4 hours ago, John78947324 said: Welcome back,emuline. Does anyone know the best version of Aqua to run Luminous? ver0.0.44 was not work. Try this: https://github.com/hykilpikonna/AquaDX?tab=readme-ov-file#usage-v1-developmental-preview 1
dakong91 Posted July 29, 2024 Posted July 29, 2024 (edited) Im trying to use aquadx1-1-dev and after starting start.bat it says unable to acces jarfile aqua.jar. Anyone know where to get this file? Edited July 29, 2024 by dakong91
poggi Posted July 29, 2024 Posted July 29, 2024 Sorry to be the millionth person asking but could i get an invite to the discord, thanks
TamamoNo1 Posted July 29, 2024 Posted July 29, 2024 On 7/28/2024 at 12:16 PM, taptaptap2023 said: I have Luminous working as guest mode, using AquaDX remote, and I am unable to create a new save file. When I first tried to create a new save, I accessed some other player's save file (we used the same 20 digit aime). When I changed the 20 digit number in aime.txt and try to create a new account, I get this error: I tried several different 20 digit values but I always get this error unless I use the values that belong to the other player. Any advice on what I should try? I think it says that because it was started as Guest Mode, you can't use an Aime card. I guess we'll have to wait for a solution for the authentication servers to work.
Ryuu139 Posted July 31, 2024 Posted July 31, 2024 I've spent more than 8 hours trying to configure chunithm and every time I open the start.bat it leaves this message. Help plsss!
taptaptap2023 Posted July 31, 2024 Posted July 31, 2024 (edited) 1 hour ago, Ryuu139 said: I've spent more than 8 hours trying to configure chunithm and every time I open the start.bat it leaves this message. Help plsss! Can you check your segatools to make sure the path is correctly written? Example of what mine looks like: [vfs] ; Insert the path to the game AMFS directory here (contains ICF1 and ICF2) amfs=C:\Users\XXXXXXXXXXXXXXXXXXXX\Chuni\CHUNITHM LUMINOUS 2.22\bin\amfs ; Insert the path to the game Option directory here (contains Axxx directories) option=C:\XXXXXXXXXXXXXXXXXXXX\Chuni\CHUNITHM LUMINOUS 2.22\bin\option ; Create an empty directory somewhere and insert the path here. ; This directory may be shared between multiple SEGA games. ; NOTE: This has nothing to do with Windows %APPDATA%. appdata=C:\Users\XXXXXXXXXXXXXXXXXXXX\Chuni\chunithm sun v4\App\bin\appdata Edited July 31, 2024 by taptaptap2023
Ryuu139 Posted July 31, 2024 Posted July 31, 2024 My SegaTools look like this [vfs] ; Insert the path to the game AMFS directory here (contains ICF1 and ICF2) amfs=C:\Games\CHUNITHM LUMINOUS 2.22\CHUNITHM LUMINOUS 2.22\bin\amfs ; Insert the path to the game Option directory here (contains Axxx directories) option=C:\Games\CHUNITHM LUMINOUS 2.22\CHUNITHM LUMINOUS 2.22\bin\option ; Create an empty directory somewhere and insert the path here. ; This directory may be shared between multiple SEGA games. ; NOTE: This has nothing to do with Windows %APPDATA%. appdata=C:\Games\CHUNITHM LUMINOUS 2.22\CHUNITHM LUMINOUS 2.22\bin\appdata
Zen_B7 Posted July 31, 2024 Posted July 31, 2024 5 minutes ago, Ryuu139 said: My SegaTools look like this Remove 2.22 from folder name and edit segatools accordingly.
Ryuu139 Posted July 31, 2024 Posted July 31, 2024 29 minutes ago, Zen_B7 said: Remove 2.22 from folder name and edit segatools accordingly. I removed 2.22 from folder name and i have my segatools edited accordingly but it still doesn't work.
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now