[Arcade PC] Justice League - Heroes United (Global VR)

[Rex2573]

3 ore fa, Trymado ha scritto:

I use win7 et game work perfectly.

Install manually the codec

also my version run perfectly but it miss off the video intro  so i should need a preconfigured file to solve this issue if possible

Edited May 24, 2020 by Rex2573

[Arcadegamer1]

https://www.free-codecs.com/windows_media_video_vcm_download.htm

[Rex2573]

3 ore fa, Arcadegamer1 ha scritto:

https://www.free-codecs.com/windows_media_video_vcm_download.htm

i have installed it but nothing to do

[Arcadegamer1]

just  install all the codecs you can find trial and error here

[Rex2573]

3 ore fa, Arcadegamer1 ha scritto:

just  install all the codecs you can find trial and error here

unfortunately nothingh to do

[Arcadegamer1]

ok well got mine going takes me few hours figuring it out

[Rex2573]

4 ore fa, Arcadegamer1 ha scritto:

very good hope i helped

under win 7 for 32 not

[Arcadegamer1]

it is

[Arcadegamer1]

i did have problems making it work again been mucking around with the codecs i downloaded a codec pack that  resets codecs to orignal settings tryed it and movies work again .in windows 10

just download shark007 codecs

Edited May 29, 2020 by Arcadegamer1

[enviroranger]

 Has anyone figured out how to get 2 players to work? When I plug in 2 controllers, they are both mapped to player 1. I would love to play this with my friend. Thanks.

[Arcadegamer1]

[maluja]

 

Hello I want to comment on the problem I have with this game, from the JLA game executable it works well for me in full screen but from teknoparrot the screen remains blank. Any solution? Thank you

[punkdark2000]

On 13/06/2020 at 11:10 PM, spiderzsoft said:

 

plug in 2 controllers then go to

• Main Menu
• Diagnostic
• Controller Diagnostic

and set here your 1 & 2P controllers

 

Done it

I did that but I can't get out of the main menu screen the game crashes and closes.

[Guest R.R.Z.]

19 minutes ago, maluja said:

 

Hello I want to comment on the problem I have with this game, from the JLA game executable it works well for me in full screen but from teknoparrot the screen remains blank. Any solution? Thank you

Run it windowed and lower your dektop resolution for full screen

[maluja]

hace 12 horas, R.R.Z. dijo:

Run it windowed and lower your dektop resolution for full screen

 

The resolution of my desktop is 1920 x 1080, if I launch it from the executable to 1360 x 768 it launches it in full screen, however if I launch it from teknoparrot in window mode it executes it with the reduced window and if I launch it from teknarrot to screen complete what I want the screen is blank so I deduce that the problem is teknoparrot

[Guest R.R.Z.]

25 minutes ago, maluja said:

 

The resolution of my desktop is 1920 x 1080, if I launch it from the executable to 1360 x 768 it launches it in full screen, however if I launch it from teknoparrot in window mode it executes it with the reduced window and if I launch it from teknarrot to screen complete what I want the screen is blank so I deduce that the problem is teknoparrot

In tp it runs only windowed when you lower the desktop resolution you’ll get full screen its the only way if you want to play it with tp 

Edited June 17, 2020 by R.R.Z.

[Geordiedean1974]

anyone got this working in teknoparrot mine just boots to a white screen with the spinning windows circle. i can boot from the JLA file standalone but cant get it to load in TKP...any ideas??

Edited August 4, 2020 by Geordiedean1974

[BlackPredator72]

On 3-8-2020 at 20:33, Geordiedean1974 said:

anyone got this working in teknoparrot mine just boots to a white screen with the spinning windows circle. i can boot from the JLA file standalone but cant get it to load in TKP...any ideas??

I have the same but I can't even start it from the JLA.exe

I created a shortcut with -nohardware parameter

Resolution in the ini is 1600x900

Hangs on the intro screen...Initializing

log file says: FATAL ERROR: CPhysicsManager: Failed to initialize Physics Engine!

 

After putting the 4 PhysX .dll files into the game folder, I can start the JLA.exe, but still not from TP.

Edited November 5, 2020 by BlackPredator72

[shitoken]

Me too I cannot run this via TP at all. But can run directly via JLA.exe.
Anyone able to solve?

I am using WIN7

[shitoken]

Hi  I am on win7 and getting this error

 

FATAL ERROR: CPhysicsManager: Failed to initialize Physics Engine!

 

I have replaced dll files , installed codec manually

[chrisino]

Finally got this running on Windows 7 64 bit. 

 

Installed codecs included in the download.

 

Downloaded fix_JLA_physxdll_w8_w10.rar (even though I'm running Windows 7)

 

Extracted into the game directory and ran the game exe.

 

Now works fine in full screen.

 

Jobs a good one. 

 

 

[Guest POPO69]

hello I have this error can you help me please?

[andykt]

On 12/10/2020 at 4:36 PM, chrisino said:

Finally got this running on Windows 7 64 bit. 

 

Installed codecs included in the download.

 

Downloaded fix_JLA_physxdll_w8_w10.rar (even though I'm running Windows 7)

 

Extracted into the game directory and ran the game exe.

 

Now works fine in full screen.

 

Jobs has good one. 

 

 

Nice one! Works now.

 

EDIT - spoke too soon. Game works, but no sound. I have the intro music on the attact mode, but once I press start, no sounds in game.

 

EDIT2 - fixed sound now by replacing the OpenAL32.dll

 

Guide to setting this up on Windows 10

 

Run the game in TP in windowed mode

Use Borderless Gaming to force it fullscreen

download both the OpenAL32.dll and the JLA physx dlls and drop them in the game folder

 

Shame the game is pretty rubbish

 

 

OpenAL32.dll

Edited March 12, 2021 by andykt

[kris85]

On 14.06.2020 at 4:10 AM, spiderzsoft said:

 

plug in 2 controllers then go to

• Main Menu
• Diagnostic
• Controller Diagnostic

and set here your 1 & 2P controllers

 

Done it

Hello i got 2 Questions 4 you :
Justice League - Heroes United 
1. Is it possible to somehow change the keyboard buttons in the game and in services mode
2.Similar to the first question, but it is about the LB button on the pad, so when you press it, the game ends the level with the highest result, such as a cheat, skip level which is a bit irritating and makes no sense ; (

I would like to assign buttons for my Arcade panel + Xbox 360, Ps3,4 pad etc. But as you know, navigating the service mode works on the arrows, I would just like there to be no conflicts with the buttons + I understand that you cannot assign dpad and analogue to movement on the pad at the same time up ?

Unfortunately, I wanted to write to ducon2016 but he doesn't accept the news; (

 

Edited July 9, 2021 by kris85
:)

[vince16]

Game won't start here. how do I fix the DLL:\Plugins\Release\OpenAL.dlo error???

Edited August 21, 2021 by vince16

[Pinball Virtual - Victor]

En 4/3/2018 a las 13:50, july2779 dijo:

@Mohkerz: Thanks  my OpenAl32.dll for win 10 this running good for this game. Delete old and replace with this.

 

OpenAL32.dll

With this .dll the sound work for me too, thanks

[marktnt]

Hi guys, i play at this game on my WIN10 64Bit by TecnoParrot and the game works fine :D

But i have only last problem. Not works in Full screen mode. My Resolution its 3840x2160 but i would play it in HD if is possible. How to do ?

I use TecnoParrot. Please Help Me.

Thanks, bye bye. Mark.

 

Edited October 15, 2021 by marktnt
I Fix audio problem thanks this forum

[LongnPlay]

Le 14/10/2021 à 9:40 PM, marktnt a dit :

Hi guys, i play at this game on my WIN10 64Bit by TecnoParrot and the game works fine :D

But i have only last problem. Not works in Full screen mode. My Resolution its 3840x2160 but i would play it in HD if is possible. How to do ?

I use TecnoParrot. Please Help Me.

Thanks, bye bye. Mark.

 

To change the resolution follow these steps:

1 - Right-click on the JLH.ini file and uncheck the option Read Only, then OK.

2 - Open the JLH.ini file and look for the command lines;

ScreenResolutionX=1920
ScreenResolutionY=1080

Change the 1920 and 1080 values for your monitor resolution values, save and close the text file.

3 - Right-click on the JLH.ini file and check back the option Read Only, and OK.

[immortalsoule]

I just cannot get beyond the opening pic screen and I've followed all of these ideas. The codecs, the settings, ect , ect , ect...

 

What else can i do? This is the ONLY game i can't make work on Teknoparrot out of the entire collection.

 

Anyone have any thoughts, here are my specs.

 

I repeat, "all" other games work. What is the count now, 192?

 

I could really use the help here. I'm about to order a custom made arcade control deck and i would love to his Teknoparrot completely working for my arcade party.

 

Nvidia GTX 1650 card BTW

 

Device name    Steam-01
Processor    Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz   3.60 GHz
Installed RAM    32.0 GB
System type    64-bit operating system, x64-based processor
Pen and touch    No pen or touch input is available for this display
 

Edition    Windows 11 Home
Version    21H2
Installed on    ‎12/‎11/‎2021
OS build    22000.376
Experience    Windows Feature Experience Pack 1000.22000.376.0

 

 

 

Edited January 11, 2022 by immortalsoule

[sirgubster9]

Le 14/06/2020 à 04:10, spiderzsoft a dit :

 

plug in 2 controllers then go to

• Main Menu
• Diagnostic
• Controller Diagnostic

and set here your 1 & 2P controllers

 

Done it

what keyboard key gets you into the main menu test menu?  Just says "some keyboard key" in the readme file.

 

test menu button is o. pressed all the keys and found it ha ha.

[sirgubster9]

How do you keep the settings once you change them to allow second player control. Everytime I exit game when I come back controls are set back to default again. 

[Minyi]

Hello guys, please I need help
I try install game, follow the instruction on read-me, the game running, sound is fine, but my character just walk in place when i control it
Please somebody help me to understand why this is happening ?