Guest linglang Posted April 12, 2019 Posted April 12, 2019 (edited) I could not get Groove Coaster 2 Heavenly Festival to run with Teknoparrot 1.0.0.124, so i tried it with GameLoader All RH 333. So by request, here are the instructions. But first thanks @7zxkv for the original post and instructions. Ignore the manual on the game download page for now. Extract the downloads to the folder(s) of your choosing. Groove coaster 2 heavenly festival game exe.7z contains a patched game.exe, and TypeXZEROTemp.dat this file needs to be in the root of C: Go to the Gameloader All RH front page and download the latest version, (333 at the time of writing) Extract the files to the extracted Groove Coaster 2 Heavenly Festival game folder. Run Game Loader Installer.exe in the game folder next to the game.exe. You have not installed Gameloader All RH before ? You will get a "warning" about a virus, that is fake. A text file will pop up, Enter agree, and save. Text file does not show up ? Or you already installed GameLoader All RH before. Or you can find, Settings.ini at this location: C:\Users\"Your User Name"\AppData\Roaming\Game Loader All RH [Ignore] Warning=agree [FileVersion] Version=0.3.3.3 Show=0 The "Show=0" makes the green version number of GameLoader All RH at the bottom of the screen disappear after 5 seconds, as it detects the game has started. Run Game Loader Installer.exe again (if needed), now it will install the latest version of Gameloader All RH. Now run Game Loader Config.exe These are the settings I used, my monitor resolution is 1360 x 768 @ 60 Hz, but I still used 720 x 1280 at the moment, you could try your monitor resolution accordingly. https://ibb.co/vDqvHd8https://ibb.co/M5CSD5ghttps://ibb.co/Bw06X9thttps://ibb.co/hXsDt8qhttps://ibb.co/rZhzHnWhttps://ibb.co/wwBt2hHhttps://ibb.co/nQQts1Chttps://ibb.co/qJ7739Mhttps://ibb.co/FDYZkDNhttps://ibb.co/LP6Y92hhttps://ibb.co/fQ1czq5 There is mention in the original manual posted by 7zxkv on the game download page, of a (internal resolution) of 720 x 1280. Quote: Ensure that you are configured for 720P Portrait resolution (720x1280) or else you'll get a DirectX error if it is a incompatible resolution. You can try windowed mode too via "data \ system.cfg" As you can see they set the monitor resolution to tate (vertical) mode with 720 (vertical) x 1280 (horizontal) Normally one would set the resolution 1280 x 720 for Yoko (horizontal) mode, but this game needs tate, vertical mode !! That is why they switch the resolution values ! I used 720 x 1280 as you can see on the GameLoader All RH window size tab. 768 x 1360 also worked for me at the native resolution of the monitor. But i got 1 small problem, at either resolution, see this post. So if anyone got a solution for that, PM me and / or post it in the Gameloader All RH thread. I used IDMac version 1.5, replace the iDmacDrv32.dll, but save the original if needed for later. Thanks @djexpert http://www.mediafire.com/file/8o1y5loc7mrvnnf/iDmacXv1.5.rar Now you need the patched game.exe and TypeXZEROTemp.dat Contained in Groove coaster 2 heavenly festival game exe.7z Replace the original game.exe with the patched one. (save the original file) Copy TypeXZEROTemp.dat to the root of your C: drive, no need to replace if one is already there. These are the settings I used in AntiMicro. https://github.com/AntiMicro/antimicro/releases https://ibb.co/QKtg2JQhttps://ibb.co/ws841hr I assigned WASD to the left stick, Space is button press, assigned to the left front button / shoulder on the joystick. I assigned the keyboard arrows to the right stick, right Ctrl key is button press, assigned to the right front button / shoulder on the joystick. I assigned F3 (coin-up) to the back button on the joystick. F1 is service mode, the second option is input test. Start antimicro with the correct profile and minimize it, it is in the corner near your window$ clock. Start Game Loader All RH.exe the game should run now. Omnimix expansion pack ? (Not tested by me) https://mega.nz/#!KaoTgAbB!DAXrjanwZwdwXzUKX_OE2o0BX9yRikegVuaAkW06T0s I am very tired at the moment, but still, by request I put up this tutorial, so if I made a mistake PM me ! So people, test it, PM me if if needed, if it works for you, or not ..... Or leave a like at this post / tutorial, so I know if it worked out for you ! Read the original manual / tutorial posted by 7zxkv on the game download page if needed. Local LAN versus play ? (not tested yet) The player can start the play in multiplayer mode. Once a player starts recruiting, a 90-second countdown will start. Other players (up to 3 more, which can make a 4-player match) can join the match before the countdown ends. The recruiting player can also end the recruitment by pressing the BOOSTER button. Stage selecting is almost the same, only with a little difference. Any player can decide the song that will be played in the match, and each player selects his/her own modes, items, or skins. However, EXTRA mode selecting goes in a very different way. If the songs that contains EXTRA mode were selected by the player that has already unlocked the mode, then all the player can select EXTRA mode. If not, then only the player who has already unlocked the mode can select it. Enjoy !! I hope that this tutorial helps other people out. It takes you a few moments to read, but it took me a while to figure it out. When you get the game working, thanks to this "manual", please give a thanks at this post. And a BIG thanks for the people who originally uploaded the games, we all can enjoy (if you do it right) !!! And of course all the people involved in, the game loaders and JVS I/O emulation applications we use, and all the people I "forgot". Also look at the posts below, some members / people add helpful information, thank them also ..... Edited July 1, 2019 by linglang
mastershakelock Posted February 23, 2020 Posted February 23, 2020 On 4/12/2019 at 10:55 AM, linglang said: Works great
cuteshiba Posted July 4, 2020 Posted July 4, 2020 HI, sorry to necro the thread but ive been stuck with the game terminated error, I honestly followed the settings perfect and dont know what it could be!
Guest Onkel Posted July 4, 2020 Posted July 4, 2020 (edited) 52 minutes ago, cuteshiba said: HI, sorry to necro the thread but ive been stuck with the game terminated error, I honestly followed the settings perfect and dont know what it could be! Start over and try these instructions http://www.emuline.org/topic/1233-arcade-pc-groove-coaster-2-taito-type-x-zero/?do=findComment&comment=74775 Also check post #1 Edited July 4, 2020 by Onkel
cuteshiba Posted July 4, 2020 Posted July 4, 2020 2 minutes ago, Onkel said: Start over and try these instructions http://www.emuline.org/topic/1233-arcade-pc-groove-coaster-2-taito-type-x-zero/?do=findComment&comment=74775 thanks for the fast reply. even though I feel ive gone over it so many times, ill restart and try again right now. lets hope for the best!
cuteshiba Posted July 4, 2020 Posted July 4, 2020 21 minutes ago, Onkel said: Start over and try these instructions http://www.emuline.org/topic/1233-arcade-pc-groove-coaster-2-taito-type-x-zero/?do=findComment&comment=74775 Also check post #1 am I supposed to run the game through Teknoparrot GUI? because when I do it tells me to remove a few files from the directory.
Guest Onkel Posted July 4, 2020 Posted July 4, 2020 (edited) 25 minutes ago, cuteshiba said: am I supposed to run the game through Teknoparrot GUI? because when I do it tells me to remove a few files from the directory. No use Game Loader All RH.exe to start the game, takes a while Black screen ? End srtgl.exe in taskmanager srtgl.exe keeps hanging for all my GL loaded games since version 368 which sucks Edited July 4, 2020 by Onkel
cuteshiba Posted July 4, 2020 Posted July 4, 2020 (edited) 11 hours ago, Onkel said: No use Game Loader All RH.exe to start the game, takes a while when I launch through game loader RH exe now, it hangs on a black screen then eventually closes I thought I was a patient person in life till I started trying to get this to work, thank you for helping me though update: adding iDmacDrv32.dll added a white screen to the black screen, but still hangs @Onkel hmm I dont seem to have a srtgl.exe in my task manager. is there no way I can download someones config all setup? or should I try this on another computer maybe? IT WORKS ON MY OTHER COMPUTER????? Edited July 4, 2020 by cuteshiba
cuteshiba Posted July 4, 2020 Posted July 4, 2020 (edited) okay well ive made progress on the second computer, this is what I get now on launch edit: placed that file on my C: drive, just need to figure out how to insert a coin and get past info screen! edit 2: got past the info screen and can play a song, however the game is alittle laggy, ill see if its a computer issue Edited July 4, 2020 by cuteshiba
cuteshiba Posted July 4, 2020 Posted July 4, 2020 (edited) yeah I honestly dont know how to fix this lag, its just microstutters during songs, any ideas anyone? ;edit I should specify the game isnt lagging the audio is. I read that post that said to set windows audio to 2 channel 44.1 16bit to stop it but it doesnt seem to fix it... hmm Edited July 4, 2020 by cuteshiba
TheGreedApostle Posted October 7, 2020 Posted October 7, 2020 how can fix this? I just can't pass this startup problem
s2010060 Posted October 15, 2020 Posted October 15, 2020 Hi, is there anyway to create a virtual nesica ic to save my progress and unlock songs?
Jame Posted October 15, 2020 Posted October 15, 2020 4 hours ago, s2010060 said: Hi, is there anyway to create a virtual nesica ic to save my progress and unlock songs? As of writing this, there isn't any to my knowledge. Most arcade data sites seem to consider it taboo if you emulate nesica score saving too so we likely won't be getting one any time soon.
Akshuls Posted October 16, 2020 Posted October 16, 2020 23 hours ago, Jame said: As of writing this, there isn't any to my knowledge. Most arcade data sites seem to consider it taboo if you emulate nesica score saving too so we likely won't be getting one any time soon. Where can you download the actual game? Links are down.
Jame Posted October 17, 2020 Posted October 17, 2020 20 hours ago, Akshuls said: Where can you download the actual game? Links are down. The original links still work, but you'll have to replace "8ch.net" with "8kun.top"
Akshuls Posted October 17, 2020 Posted October 17, 2020 6 hours ago, Jame said: The original links still work, but you'll have to replace "8ch.net" with "8kun.top" I did that and it just took me to a discussion board about it with no links. Theres that TechnoParrot link for it but its on UpToBox and thats banned in USA. even with VPN speeds are too slow.
Jame Posted October 18, 2020 Posted October 18, 2020 57 minutes ago, Akshuls said: I did that and it just took me to a discussion board about it with no links. Theres that TechnoParrot link for it but its on UpToBox and thats banned in USA. even with VPN speeds are too slow. My bad, was thinking of the wrong thread. Here's the one with the links
Akshuls Posted October 18, 2020 Posted October 18, 2020 12 hours ago, Jame said: My bad, was thinking of the wrong thread. Here's the one with the links All i see is that russian link and im in America.. Getting like 10 kb/s ..
Jame Posted October 19, 2020 Posted October 19, 2020 On 10/18/2020 at 5:57 AM, Akshuls said: All i see is that russian link and im in America.. Getting like 10 kb/s .. That's really the only link there is that works. Either you take it or you leave it.
stanleyyeh0205 Posted September 30, 2021 Posted September 30, 2021 @linglang, thanks for sharing how you set up GLAR. I set window size to 998x1778 and was able to run the game.
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now