[TUTO] Initial D Stage Zero Arcade - how to setup and play (Nvidia & AMD Cards working)

[nikogamer233nk]

il y a 1 minute, petje a dit :

Try ?

Maybe you will not have that specific problem.

ok

[Guest petje]

You can try version 8 of segatools for new steering options and a older version of minime for server functions

[nikogamer233nk]

il y a 15 minutes, petje a dit :

You can try version 8 of segatools for new steering options and a older version of minime for server functions

IT WORKS!!!! thanks man, but how do i create a character and save, because when i hit start at aime card registration it goes to the not saving game part, you know what i mean?

 

 

[Guest petje]

7 minutes ago, nikogamer233nk said:

IT WORKS!!!! thanks man, but how do i create a character and save, because when i hit start at aime card registration it goes to the not saving game part, you know what i mean?

 

 

1,2 are used in the service menu

3 is insert coin

Press and hold enter when it asks to use a aime card

[nikogamer233nk]

il y a une heure, petje a dit :

1,2 are used in the service menu

3 is insert coin

Press and hold enter when it asks to use a aime card

Do you know why there is like a very big deadzone when using wheel?

Its pretty dificult to control

Also, at what degrees should my wheel be turn at? 540, 250?

Thanks for the help

[segaoutrun123]

Is there anyway to map the arrow buttons using wheel

cant you use wheel for left right and shifter for up down

or is it not possible yet

[Guest petje]

idzio.dll determines the steering the original included version is probably more precise 

250 ?

i have no steering wheel so i can not test

[nikogamer233nk]

il y a 1 minute, petje a dit :

idzio.dll determines the steering the original included version is probably more precise 

250 ?

i have no steering wheel so i can not test

ok, the only thing that bothers me is the deadzone, but i can bear with it

 

[rabidduck]

Hey! Thanks again for releasing all this info! I'm having a issue that I've run out of ideas to regarding the shifter(using a G29). I've noticed it seems to not even matter what I put in in the segattools.ini (perhaps hardcoded like the arrow keys?) for the shift options. The paddles always pick 5/6 gear and the Tri/Square/Sqr/X all goto a specific gear(even if I leave them unbound in segatools.ini)

; Button mappings for the simulated six-speed shifter.
shiftDn=6
shiftUp=7
; Button mappings for the positional shifter, if present.
gear1=
gear2=
gear3=
gear4=
gear5=
gear6=

 

Also the cars always switch back to AT from MT(if I goto a gear itll goto MT for a second or two and then go back to AT). I read earlier in the thread this was caused by autoNeutral=1, however I changed it to autoNeutral=0(assuming 0 is off) however the same thing happens. Cheers!

[KimFD3S]

I have the same problem as rabidduck but with a T300 RS it seems the value keep changing each time I boot the game. Like I found a value for Throttle but it was on break, so I switched the value in segatool to throttle but nothing happen in the throttle. Also if I go into test mode in the game and try the input settings, throttle and clutch are never recognized while paddle are recognized as gear 1 and 2 and some other buttons as other gears. No buttons works for up/down gear.

 

Not sure how to set the wheel up, any help is appreciated.

[KimFD3S]

@petje Stupid question but if I overwrite the minime folder in C: will I loose my save game ? Or is my save online tied to my ip ?

[Guest petje]

16 minutes ago, KimFD3S said:

@petje Stupid question but if I overwrite the minime folder in C: will I loose my save game ? Or is my save online tied to my ip ?

No it is felica.txt in SDDF_1.31.00/app/package/DEVICE

[KimFD3S]

On 12/8/2019 at 10:10 AM, petje said:

No it is felica.txt in SDDF_1.31.00/app/package/DEVICE

Ok thanks, I'm guessing you dont know how to fix the paddle shifting with a t300rs by chance ?

[asu1235678]

hi guys,i got the game all working and fine,but my only problem is the minimap so big and in the middle of the screen.and also the resolution so small when play fullscreen the graphics look so bad.anyone has solution?thanks 

[Guest petje]

game only runs correct at 1920x1080 as far as i know

[asu1235678]

3 hours ago, petje said:

game only runs correct at 1920x1080 as far as i know

 

nevermind,i changed the res on initiald.ini and renderer.ini to 1360x768 and works like charm.

do you know how to increase the win point value after winning?pretty hard to grind the level and points :D

[KimFD3S]

21 hours ago, asu1235678 said:

 

nevermind,i changed the res on initiald.ini and renderer.ini to 1360x768 and works like charm.

do you know how to increase the win point value after winning?pretty hard to grind the level and points :D

As far as I know there's no cheat or save editor yet for ID0. You'll have to play the game (I know crazy right).

[Kobe46]

12 hours ago, KimFD3S said:

As far as I know there's no cheat or save editor yet for ID0. You'll have to play the game (I know crazy right).

Actually there is. I am not familiar with how to do it, you have to edit the database so that things are unlocked. I know it can be done, like ID8 from what I recall, it is very similar.

 

Someone else might have some more insight, but it is possible to do so.

[KimFD3S]

9 hours ago, Kobe46 said:

Actually there is. I am not familiar with how to do it, you have to edit the database so that things are unlocked. I know it can be done, like ID8 from what I recall, it is very similar.

 

Someone else might have some more insight, but it is possible to do so.

You're right, I should have said there's no way to do it right. I've seen people adding different gauge on discord so it can be done but it's quite complicate atm from what I got.

 

[Kobe46]

Heh, so I just learned it on the fly. Understand databases kinda. So here is a quick document on how to change Level, Fame, DPoints and unlock Gauges and cup... I wrote this like 20 minutes ago. Enjoy. This is all from Discord community :D I just compiled what I could find. Might add more later on if I guess feel like searching for more. I only play this seldomly lol.

 

Enjoy.

ID Zero Modify data.docx

[Guest petje]

Minime Version 9

https://gofile.io/?c=WtUzPE

Backup your c:/minime folder and overwrite files with this new release

[Kobe46]

On 12/8/2019 at 1:46 AM, KimFD3S said:

I have the same problem as rabidduck but with a T300 RS it seems the value keep changing each time I boot the game. Like I found a value for Throttle but it was on break, so I switched the value in segatool to throttle but nothing happen in the throttle. Also if I go into test mode in the game and try the input settings, throttle and clutch are never recognized while paddle are recognized as gear 1 and 2 and some other buttons as other gears. No buttons works for up/down gear.

 

Not sure how to set the wheel up, any help is appreciated.

I am not familiar with T300 RS, but is there software for the device like Logitech does? I have the Logitech support application which actually allowed my Driving Force GT to function with my gear shifter. It has the up and down shifter, the Logitech software allowed the shifter to be assigned a button map.

@rabidduck are you using this software for your wheel?

 

With T300 RS are the button mappings changing under the set up USB game controllers config in Windows?

[KimFD3S]

@Kobe46 Thanks for the tuto, works wonder for credit. As for the 300 RS, I'm good now, didnt post on this thread but I got everything working. Kinda have a huge deadzone but other than that all buttons are working now as they should. And yes trick was to check value on the thrustmaster software. Before I was using value from Teknoparrot dinput test. But found out the hard way that it's not working that way. Once I used Thrustmaster values, everything worked. Oh and if you dont have a separate shifter and want to use paddle on the wheel, set up and down to 2 and 1 and dont forget to reassign gear after that are numbered from 1 to 6 to buttons other than 1 and 2 otherwise you'll have a conflict (took me way longer than I should have to figure that one out) as well as not using the same buttons on gear that you want on view/start).

@petje Can I upgrade from 7 ? or should I upgrade 7 to 8 and then 8 to 9 ?

 

 

Edited December 13, 2019 by KimFD3S

[Guest petje]

As far as i know, straight to 9

[KimFD3S]

On 12/7/2019 at 10:35 PM, rabidduck said:

Hey! Thanks again for releasing all this info! I'm having a issue that I've run out of ideas to regarding the shifter(using a G29). I've noticed it seems to not even matter what I put in in the segattools.ini (perhaps hardcoded like the arrow keys?) for the shift options. The paddles always pick 5/6 gear and the Tri/Square/Sqr/X all goto a specific gear(even if I leave them unbound in segatools.ini)

; Button mappings for the simulated six-speed shifter.
shiftDn=6
shiftUp=7
; Button mappings for the positional shifter, if present.
gear1=
gear2=
gear3=
gear4=
gear5=
gear6=

 

Also the cars always switch back to AT from MT(if I goto a gear itll goto MT for a second or two and then go back to AT). I read earlier in the thread this was caused by autoNeutral=1, however I changed it to autoNeutral=0(assuming 0 is off) however the same thing happens. Cheers!

 

Ok when I tried that on my wheel, I had to set up gear anyway (like not letting them blank) Assign them to buttons you dont use.

As for paddle, make sure you use the value that are shown on the Logitech software if you have one. It worked for me after that way.

 

@petje Thanks again, eveything works fine now and ffb is finally working better now.

Edited December 13, 2019 by KimFD3S

[Kobe46]

@KimFD3S

Gauges is in my document. It is last step. Change value to 16383 under table: idz_unlocks.

After that in game go to garage/factory and adjust the settings option when in garage. You can see 14 different gauges to select.

[SimonBv]

Hello everyone, the game is giving me error 8306.
From what I saw my configuration is correct and even in the second window that opens the server appears in green, I don't know what error I am making help please.

[Guest petje]

  On 11/27/2019 at 8:47 PM, Kobe46 said:

I am not familiar with the 8304 or 6502 error messages.

I know that 8305 and 8306 are related to the value in segatools.ini for dipsw being set to 0. This should be adjusted to dipsw=1

[SimonBv]

The value of dipsw was already 1 by default, what else could it be?

[Kobe46]

@SimonBv Is your keychip commented? with ; in the front? Does the error come up after the wheel calibration or right at the beginning before anything gets booted up?

Also confirm no firewalls are on, or anti virus that could be preventing application from seeing local server.

Edited December 13, 2019 by Kobe46

[SimonBv]

Nope my keychips is not commented with ";" 

The error appears after wheel calibration, I have disabled windows defender and now I will check if deactivating the firewall this is fixed.

[Kobe46]

@SimonBv Since it is booting up with screen data, try hitting 1 on keyboard to boot into test menu, navigate using 2 and go to network test and see where it fails to see where it fails at.

[SimonBv]

 After testing with the firewall disabled, the error still appears, this is the capture of my network test.

[Guest petje]

Do you run minime ?

[SimonBv]

yep

[Guest petje]

It looks like something is wrong with your segatools.ini something of the network settings.

Here my segatools.ini it is set for 192.168.1.2

Set your network adapter to a static ip e.g. 192.168.1.2 ?

what is your network adres in ip4 ?

In dosbox type ipconfig

Set your DNS to 8.8.8.8 and 8.8.4.4. ?

 

segatools.ini

[Kobe46]

I would just make sure your [dns] section in Segatools.ini is setup with the network IP Address of your local machine. I assume you are running Minime on the same machine and not a separate one? but yea just make sure your IP Address is set there.

as precaution, make sure [keychip] section is setup with your Network Address: 

Example: if IP: 192.168.1.8 then Network Address can be 192.168.1.0 or to be sure, 192.168.0.0 works too.

 

I don't think DNS is an issue since if All.Net gets a connection, the established network seems to be fine. Just curious as well, what version of Windows are you on? Windows 10 build??