Scribbler

On 1/4/2025 at 9:24 AM, Nelg44 said:

Controller help. I have slidershim running and see my key inputs on the top half of the program.

 

a) What do I set the output device too?

b) Do I need specific keys or to ";" out anything in particular in sega.ini?

c) Is there I0 dll's which are required? currently I have the brokenithm ones (3 of) in the app directory.

 

Brokenithm-Evolved - Android works fine

 

Any help would be appreciated

Slidershim is normally used to make controllers work with games that aren't CHUNITHM. Is there any reason you're trying to use it when you already have Brokenithm-Evolved working?

If you REALLY want to use slidershim with CHUNITHM, you'll need to set the output to one of the keyboard modes. This should be the segatools.ini settings for Keyboard 32-zone, Tasoller Layout

 

[io3]
; Test button virtual-key code. Default is the F1 key.
test=0x70
; Service button virtual-key code. Default is the F2 key.
service=0x71
; Keyboard button to increment coin counter. Default is the F3 key.
coin=0x72
; Set to 0 for enable separate ir control. Deafult is space key.
ir=0

[ir]
; Uncomment and complete the following sequence of settings to configure a
; custom ir-cappable controller if you have one.
ir1=0xBF
ir2=0xBE
ir3=0xDE
ir4=0xBA
ir5=0xDD
ir6=0xDB

[slider]
; Enable slider emulation. If you have real AC slider, set this to 0.
; Slider serial port must be COM1.
;enable=1

; Key bindings for each of the 32 touch cells. The default key map, depicted
; in left-to-right order, is as follows:
;
;                   SSSSDDDDFFFFGGGGHHHHJJJJKKKKLLLL
;
; Touch cells are numbered FROM RIGHT TO LEFT! starting from 1. This is in
; order to match the numbering used in the operator menu and service manual.
;
; Uncomment and complete the following sequence of settings to configure a
; custom high-precision touch strip controller if you have one.
cell32=0x41
cell31=0x31
cell30=0x5A
cell29=0x51
cell28=0x53
cell27=0x32
cell26=0x58
cell25=0x57
cell24=0x44
cell23=0x33
cell22=0x43
cell21=0x45
cell20=0x46
cell19=0x34
cell18=0x56
cell17=0x52
cell16=0x47
cell15=0x35
cell14=0x42
cell13=0x54
cell12=0x48
cell11=0x36
cell10=0x4E
cell9=0x59
cell8=0x4A
cell7=0x37
cell6=0x4D
cell5=0x55
cell4=0x4B
cell3=0x38
cell2=0xBC
cell1=0x49

On 12/21/2024 at 6:52 AM, junniebabe said:

Anyone know if a114 is out for luminous or luminous plus? I know we have most options for luminous plus, but I haven't seen that one yet

What do you mean luminous OR luminous plus? You shouldn't be combining options from different versions.

Also, there's no such thing as A114 for luminous plus. It's A001 to A112. Regular luminous is A001 to A181.

Any Chunithm Verse posters?

13 hours ago, themlgpro said:

Has anyone gotten it to work on the latest Artemis Master?
My Luminous is still not connected to the AllNet, and I'm not sure why...

When I run the game into Artemis, it shows that the machine is unregistered, as well as the billing:


I feel like I've done everything, from reinstalling and reconfiguring Artemis Master, setting ownership in dbutils, checking IP-addresses in Core config and segatools,
and such.
The database is connected, but I'm not able to see where I can register the serial into the database...
In the end, I can't save any progress on Chunithm, which makes me very sad   :(((
 

Your screenshot shows SDDT connecting to artemis. SDDT is ongeki, not chunithm ...

18 hours ago, Galaya said:

I hope he’d release jconfig  

for wangan6RR version 3.05 with offline saving publicly 

awesome loader!💪

the dump is public for a long time now

wangan6R already works with offline saving with jconfig

and with tp not

Hello robert1996. Thank you for all you do for the community 🙏

13 hours ago, Zen_B7 said:

Scroll up and LOOK ?!?!

                                                                                                                                                                                                                            🙄

they're not asking for an invite to the emuline discord 🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄

11 hours ago, Breaker MKV said:

A tutorial video on how to make this run would be VERY appreciated. 

There is no tutorial and no guide on how to run this, because you can't run this. This game REQUIRES a server to run, even in single player mode. The server is still under development and hasn't been made public yet, as it is not finished.

You're just gonna have to wait.

24 minutes ago, huangallen said:

sorry, the next question is i pass all the test but still cannot connect internet in the game
i have done all the instructions in https://rentry.org/artemisscreenshots061223 

I recommend you read what I wrote several times at the very top of that page. The errors claim the database doesn't exist. Follow the instructions on the Artemis git page, not the rentry page.

https://gitea.tendokyu.moe/Hay1tsme/artemis/src/branch/master/docs/INSTALL_WINDOWS.md

Use the MASTER branch for Chunithm, not the develop branch.

48 minutes ago, Eryx said:

 

 

Thanks for your answers i'll try différent stuff and Come back to you either to tell that i threw my tasoller against a wall or that a miracle occured.

 

 

I'll do a backup and fuck around the files and USB cable, finally i'll update the touchpad.

 

Thanks a lot nonetheless you really helped me a lot!

How old is your Tasoller? If you bought it new when did you buy it? If it was purchased in 2022 or later then you shouldn't need to use a UART cable to flash the firmware.

If it's older than that and still on Factory 1.0 firmware, then follow the DAO guide to get on 2.0 https://www.dj-dao.com/en/support/11.html

If your Tasoller is newer (or after you've done the UART flash if it's older) grab the custom firmware files from here https://pixeldrain.com/u/v28yFBTZ

There's a readme in the zip that'll tell you exactly what to do, with only the regular USB cables being required.

You can use the fufubot segatools included with the custom firmware and it should just work in its default configuration, though I personally recommend using;

segatools: https://gitea.tendokyu.moe/Dniel97/segatools/releases

chuniio for tasoller: https://gitea.tendokyu.moe/Scribbler/chuniio-tasoller/releases

and follow the instructions for the dlls herehttps://gitea.tendokyu.moe/Scribbler/chuniio-tasoller#configuration

and as my user box to the left says, check my profile for useful links

2 hours ago, huangallen said:

could anyone tell me whats wrong with it when i enter python dbutils.py create to install artemis and it doesnt have allnet connection

  to 

4 hours ago, Eryx said:

so i did my research and i was in fact using fufubot segatools so i redid my segatools.ini just in case,

i had some problem while debugging but now the game is launching better than ever, the aime card thingy is working well.

my tasoller is now turning black when game is launching and get the right color when the game is on,

if i emulate the aime card it even turned blue and red as it should be, but still no answer from the touch pad when i tap on it.

 

i link the zip where i got the segatoolschusan-segatools_v1.0.3.1_by_fufubot_team.zip note that i also installed all the file in there

 

i also link my segatools.inisegatools.ini just in case something is wrong.

 

if you tell me eveything should work i'll go ahead and do the laborious install of the touchpad firmware with the special wire.

 

once again thanks a lot for your help you're doing god's work

your [vfs] is fucked, either put the directoy in "quotes" or just use relative paths. Looks like all your folders are inside the bin folder so just put amfs=amfs, option=Option, appdata=appdata

5 hours ago, Eryx said:

update that i updated my LED and HOST Firmware to V2, touchpad is now rainbow but no answer from touchpad inside and outside the game,

when i plug it the AIR stuff detect my hand and the LEDs are lit but when i touch the pas everything deactivate and nothing respond,

i believe that i have to update the touchpad firmware like the tasoller constructor indicated, can you confirm that ?

 

also will i need to do anything else to my bin folder for my tasoller to work ?

for info i just dowloaded the sun plus install and changed the segatool.ini for it to work with artemis,

and again thanks a lot for your answer it so frustrating to have spent 300+ bucks for it not to work now

it will depend on which segatools you are using

if you're using fufubot, make sure you have

path=tasoller.dll

in your segatools.ini under the [chuniio] section

if you're using dniel97 segatools, download these; https://gitea.tendokyu.moe/Scribbler/chuniio-tasoller/releases/tag/1.7.2 and put them in your app/bin folder (next to chusanapp.exe) and then in segatools.ini, in the chuniio section, write

path32=chuniio_tasoller.dll
path64=chuniio_tasoller_x64.dll
chusan=1

3 hours ago, Kairunrun said:

誰かChunithm LuminousのDATAファイル持ってる人いますか?

Does anyone have a data file for chunith luminous?

Nothing has been posted publicly yet, though private groups do have it.

2 hours ago, galafador said:

 

this might be dumb but what about using just a single space for the teamname? maybe try half/full width space each

While that will give a blank name it won't remove you from the team. You need to remove the team assignment in the database itself.

4 hours ago, aruser said:

Is there any information about option for CHUNITHM int?

it was posted to 1cc with just the audio rekeyed to SDHD. other files might need removing to stop any potential conflicts https://pixeldrain.com/u/EjCE2zvC

15 hours ago, NanamiArihara said:

is there any newer brokenithm with chuniio hook dll input support for wifi use please

like connecting to 192.168.x.x from the tablet browser

i don't want the specific one for android or ios

since i just use it in wirelessly

 

actually i have tried slidershim also

but it sends the input like a keyboard

and i am having problem with the touch zone around 01-12

even i edited the segatools key mapping already

the android/ios app versions are used because they have less latency. If you have io dll's for brokenithm-kb or slidershim that worked in the past, they should still work with latest segatools.

Offline patcher for all Chunithm versions.

Offline Patcher.zip

11 hours ago, ibrahim2340 said:

im sorry i didnt join that server (i got that link from somewhere else), i dont know you cant upload that to here. Im sorry

they're fine with people mirroring the files and posting them here, they just don't want their own direct links posted here.

10 hours ago, Ghostxdeath said:

query, how do I change the IP in aqua (I tried with application.properties but the IP does not change)

Because how else can I create an ID so I don't have to play as a guest?

you need to change segatools.ini to point at your local ip address

2 hours ago, ibrahim2340 said:

-snip-

1 hour ago, chokooo said:

thank you for the information, unfortunately im not a programmer guy so i just spent 2 hours trying to build those files, but i completely failed, it assumes i already have the environment set up correctly, which i cant figure out how to do. is there any way to get an in-depth guide or even just the already compiled files?

there is a releases tab at the top, it has pre-compiled files.

13 hours ago, Maximusboy said:

I've been following this guide (using Tasoller), and when I attempt to run start.bat, I'm given the error "chusanhook_x86.dll: DLL failed to load inside target process"

I have followed step 4, which requests replacing the chusanhook files with the ones in /手台設定/.

Another issue I found was this guide refers to a segatools.ini file inside "\app\bin\DEVICE\", where there isnt a segatools.ini file. I've created a segatools.ini there with all the correct settings put in place.

Any help would be much appreciated

Edit: Using the original chusanhook_x86.dll lets the game load up, everything works including Tasoller's LEDs, but the touch sensor data is not being noticed by the game.

Edit 2: Now the rainbow LED's aren't responding to touch either 😕

reinstall the custom firmware. if you have rainbow leds but no touch then your touch side of the firmware is probably fucked.

This file has instructions inside https://pixeldrain.com/u/v28yFBTZ

segatools.ini should be in app/bin. The app/bin/DEVICE folder is where your aime.txt is (where you put your card number)

8 hours ago, chokooo said:

Hey can anyone give me an input on how to use brokenithm ios? i downloaded the app fine, but there's no instructions on how to make it work anywhere.

make sure you have itunes installed on your pc (via exe installer, not microsoft store) and then follow the instructions here https://gitea.tendokyu.moe/beerpsi/chuniio-brokenithm

14 hours ago, Ivanlol said:

I'm stuck. Can someone send me their full Chunithm file that has Sun Plus and tasoller file that is programmed with the lights?

chusan segatools

tasoller dlls

your tasoller needs to be on custom firmware for this to work

11 hours ago, SnowFlower said:

First, thanks for the Alo! It was really convenient.

I have one problem. Can you tell me what procedure is needed to change IP in Sunplus Alo?  My internet IP changed because I moved out. Before using Alo, this issue was solved by changing IP in segatool.ini config but I don't know where and how to change IP with Alo

I deleted the whole file, downloaded it again, and did Artemis setup again, but still, it doesn't work.
Thanks for answering and have a good day!

segatools.ini is _GAMEDATA/App/bin_whateveroptionyouplaywith/segatools.ini if you want to set your local IP manually.

3 hours ago, sdnwls said:

So, are there currently no safe SUN PLUS files?

There are plenty of safe files. The game files themselves are completely fine.

If you used a random bin.zip from the chinese community that was posted 2 months before the game even leaked, they you might be infected.

2 hours ago, rutin said:

I solved it. I manually put the key value of the sega tools that NEW was using, and it works well.

You need the custom firmware for the tasoller. Keyboard mode isn't supported since 99% of people don't use it with Tasoller in keyboard mode.

10 hours ago, cocosuki said:

Where can I download CHUNITHM PARADISE LOST AIO?

Someone would need to make one first.

1 hour ago, kratos1883 said:

So,for me that i downloaded your Chunitm Sun Plus Aio there are no problems if i start It you saying? Also if i change the Ip Address in ini file my friend?

You shouldn't need to touch the ini files at all. Read the instructions in either the post I made or the README.txt