MrMystery

I have a problem with 'Daemon Bride Additional Gain' - when I start the game, I just get the "game.exe has stopped working" error. It worked just fine on my older configuration, but after changing components (and having Windows 7 installed as before), it has only run once and that one time seemed like it run by accident... Any suggestions?

it is just 3 new extra characters + characters balance

 

here there are :

 

- Susanoo

- Mai Natsume

- Es

 

But the Steam version is the most complete version cause of story mode, and Steam version already had all characters.

To be honest, I never played nor liked BlazBlue storymode, and for some reason, in all iterations that are ported to Steam, "anime" parts are choppy, even though they work perfectly fine when played in Media Player (and even though the game runs smoothly during the battle). Besides, the latest version doesn't allow setting keys for both players on keyboard and there's also a problem with VJoy. Not to mention the size. :D

Thank you, WildWolf!
I hope this version is much better than the Steam one.

Chaos Code 2.11, le mapping des touches est pénible en 2 joueurs. En mode test, c'est formidable, en jeu, il y a duplication.

Yeah, controls for Player 2 are quite messy.

Has anyone figured out finishing moves yet?

And I'm waiting for Chaos Code 2.01 to be fixed/re-dumped... or released on Steam, but that seems unlikely to happen. :/

Alors j'ai finis les testes pour BBCF:(tester sur Windows 7 64bit Service Pack 1)

 

Donc pour ceux qui on un problème de sauvegarde sur le test mode,j'ai trouver comment réussir a sauvegarder correctement le test mode avec le dernier idmacx 1.1 fix:

 

 

1er: il faut décocher "create of sv" (ces ça qui fou la merde,ça empêche la sauvegarde du test mode de bien fonctionner)

j config 1.1 fix.jpg

donc je vous conseille d'utiliser le ttx common save,qui marche impeccable(mémorise la configuration du test mode)

http://uptobox.com/qzewnlxdhmaf

 

2eme: Passe impeccable sur le dernier idmacx1.1 fix(voici mes réglage pour BBCF):

j config 1.1 fix.jpg

 

Voila mes fichiers prêt a l'emplois pour BBCF:(juste a cliquer sur game.exe)

http://uptobox.com/zbmfdxdzxr38

 

3eme: J'essaye de trouver le moyen d'enlever l'inscription en rouge sur BBCF,et peut être le moyen de le mettre en anglais.

 

Pour enlever l'inscription en rouge:(lol)

BBCF.jpg

Il faut aller sur DATA/LocalizeAC/jpn_idlist.txt

ouvrer le avec un bloc note,puis sur la ligne 328 ,laisser un espace vide.

BBCF.jpg

ou le lien:

http://uptobox.com/sr1y15t7wirl

 

enjoy

BBCF.jpg

Thank you, it works!

It would be cool if the offline icon could be removed as well.

Ces une question ou pas?

 

Not a question, but an answer - I played the game with 300109.key and I didn't have any problems, except that I can't save Test mode settings.

What key are you using exactly? I tried several, but when I win a match the game crash.

It works with 300109.

What's the game key?

edit: Never mind, it works with most of the keys, yet it seems that it can't save Test mode settings.

Thanks for BB CF!
(Still hoping for the working latest version of Chaos Code.)

I finish and i never saw that happen. Maybe you run a clone version.

No, I'm pretty sure it was the original version.

Has anyone managed to finish Oriental Legend 2? When I played it the other day, my character got stuck at the beginning of stage 3 (or was it 4?). I could perform all the moves, but I couldn't move forward, as if there was an invisible barrier.

Has anyone managed to run/hack 2.01.02 version of Chaos Code - New Sign of Catastrophe? Or is it still unplayable?

Yes just do Alt+Enter

You can also generate a ini file with the command line "mame.exe -cc" and set in the mame.ini created "aspect" to "4:3" if you you want 

Alt+Enter is the first thing I tried, but for some reason, it doesn't work. In normal versions of MAME, I don't have that problem. :/

Thank you!
But, is it possible to run the games in fullscreen?

!!! How do I get Ending B anyway?

Finish the first three fights of arcade mode with super cancels, and you will fight your rival after stage 3. As long as you complete arcade mode successfully beyond this point, you will get ending B.

http://wiki.mizuumi.net/w/Chaos_Code

It seems like this only applies to the console port and maybe to the (not-working) version 2.02. I've finished arcade mode with 3 characters and there's only one ending, whether you fight your rival or not. :/

In Chaos Code: I finished the story mode with Rui with and without the requirements for B ending (once I fought the rival and the second time, I didn't), yet in both cases I got the same ending. Does this mean some characters don't have two endings?

I had the same problem.

 

Extract all files from "3 - NesysService.rar" to Nesys folder.

Extract all files from idamcx to game folder (however you don't need folder RDIF and gamekeys.zip files in your folder)

Go to Nesys folder and run Install.bat as administrator

Press Y then ENTER

Press ENTER again

You may leave the command line opened

Go back to your game root folder and set game.exe properties as administrator in compatability tab. Press "OK"

Select RFIDGod_inject.exe do the same as game.exe (set it as administrator)

Finally Run RFIDGod_inject.exe

 

Note:

This game works with iDmacDrv32.dll (39k version) so you can use JConfig to map your keys.

 

After using JConfig, delete or rename the file monitor_misc.bin generated by JCOnfig or else your game wont run in fullscreen.

I think it's a setting issue but I didn't have time to try to understand it.

 

If it complains about missing dll files, all you have to do is copy those missing files to the folder.

 

Tested on Windows 10 64Bits

 

I hope it helps you.

 

Let me know if it worked for you

Thank you! Now it works, albeit the controls for Player 1 are f*cked-up even though I set everything right. :D

But never mind, I think I'll stick to the Steam version.

Game speed.

For "not recognize Keyboard" error you will have to copy to your folder the idma.... file with 36k size (the from idac file not idacX).

The keyboard keys will not be able to be define (it will be hardcoded keys " cursor keys; a; s; d; z; x; c) however it works. In other words Jconifg it will not work with 36k version.

 

For some reason most games work with idma... 39k version, however some do not like it and for those you will have to keep 36k version.

Thank you!

edit:

What about SkullGirls?

Whether I run it as administrator, with Nesys.bat, with or without RFIDGod_inject.exe, after the loading screen, I just get a blinking message. :/

What is the solution for Psychic Force 2012 "Not Recognize Keyboard" error?

I finally managed to run Chaos Code! After turning D3D9 Wrapper ON, changing savepath to "sv" in config.txt, and turning Free Play ON in test mode. And even now, game.exe crashes a couple of time, before it starts the game. Weird! :D

This is the "problem signature" I get after Chaos Code crashes with "game.exe has stopped working":
 

 

Problem Event Name: APPCRASH

Application Name: game.exe

Application Version: 0.0.0.0

Application Timestamp: 52326981

Fault Module Name: StackHash_2264

Fault Module Version: 0.0.0.0

Fault Module Timestamp: 00000000

Exception Code: c0000005

Exception Offset: 0351b5ed

OS Version: 6.1.7601.2.1.0.256.1

Locale ID: 9242

Additional Information 1: 2264

Additional Information 2: 2264db07e74365624c50317d7b856ae9

Additional Information 3: 875f

Additional Information 4: 875fa2ef9d2bdca96466e8af55d1ae6e

Is there anyone who knows what this means and what could I try? Please?
Chaos Code is the game I want to play the most and I still can't run it.

MrMystery: https://mega.nz/#%21Rgpz2ILT%21iBAHc8leRDfFlilXXH3i6CooDNz_QSzf8S3Be_vc99E (posted several month ago) is a Nesica dump or TTX dump or Ringwide dump?

It should be Nesica, given that it has Nesys folder and the fact the older version  of game.exe can make it go in-game.

In case you can run Chaos Code (I still can't), there's a way to open the newer version (the one posted a few months ago) BUT it is still unplayable. Here's the screenshot my cousin made today:



He copied "game.exe" and "game.inf" from Ver1.03.00 to Ver2.01.02 folder and started it. He says that Test mode is functional, the opening movie also works, but when you get to the select screen, you can't select a character, as the screenshot suggests.
But, maybe this will give someone the idea what to do with Ver2.01.02 game.exe and make it fully playable.