line

Il y a 19 heures, GaussTek a dit :

As cam isn't disabled by default, and you cannot access the test menu, you cannot disable it until the error shows up, so yeah, this is a regression 😞.

 

I don't remember if there's a patch to disable namcam? Can anyone post it? As it seems its needed again.

 

Hello, it's not a regression, it's actually fonction of true Arcade Cabinet. If NAMCAM is broken --> test menu ! 😉

 

So, it's proper for purist

Hello,

 

New Update : https://crediar.dev/crediar/tools/-/blob/main/dolphin/dolphin_tri_x64_14_03_2023.rar

 

Thank you Crediar !!!

Operator must have a "card unbrick tool" in exchange for a little money...

Ah... Some money

It's very good job ! @mamefan2018 and @crediar

Thanks for all.

 

So, I would use my card reader for Mario Kart. My card contain "tricard_SBKP.bin" file hex.

- When my card is read, file "User\Triforce\tricard_SBKP.bin" is generated.

In insert card screen, generated file "insert really" the card in game.

 

- When remove card procedure, file "tricard_SBKP.bin" contain is stored in my true card and "User\Triforce\tricard_SBKP.bin" is delete.

But when I dicontinous to play, the game is save and loop at this screen. Any idea ?

 

 

You can reproduct this issue with rename tricard file.

 

Finally, I would change users cards for family without reset game.

 

For test, I make this manager tool (big because framework is included).

https://mega.nz/file/btA3UQ5Z#FTBtuKuFt0ySY3ktO9Ig3Qsn9wdccpg8IJhmbangxAk

 

 

/!\ NOT USE THS TOOL WITH YOUR SAVE OR SHE WILL BE DELETE !!!

 

Before, rename "User\Triforce\tricard_SBKP.bin" to "Triforce_card_1" (without extension)

Copy tool file in Dolphin root folder

Launch tool

Launch Dolphin and MKAPG

 

With tool, select card number and click on "Insert"

 

- If you have no card, no problem. Tools wait generated tricard before stocking your profile.

- If "Triforce_card_x" exist, game detect file and load this

 

When your stop to play, wait "saving game data loop" and click on "remove" card.

 

If issue closed, you can switch and play with 5 cards (profile)

 

 

Hello,

 

@mamefan2018

I've same iso file GP2. Offset 0x800741F0 is invalid with skip boot

 

So, Namcam don't block game.

 

Pour ceux qui ne comprennent pas, voici comment faire fonctionner "from scratch" la version JPN de GP2 sans lag et sans testmode :

[OnFrame]
$Loop Fix (JPN)
0x8002EA28:dword:0x60000000
0x8002EA34:dword:0x41820158
$Skip Testmode (JPN)
0x8002E3A0:dword:0x60000000
0x8002E3AC:dword:0x60000000
$Steering power off / handle (JPN) / for skip testmode
0x80598A81:byte:0x00000001
0x80598A82:byte:0x00000000
$Disable NAMCAM (JPN) / for skip testmode
0x80598A85:byte:0x00000000
0x800741F0:dword:0x98000025
$SeatLoopPatch (JPN) / for skip testmode
0x800855dc:dword:0x4800000C
0x80085550:dword:0x60000000

[OnFrame_Enabled]
$Loop Fix (JPN)
$Skip Testmode (JPN)
$Steering power off / handle (JPN) / for skip testmode
$SeatLoopPatch (JPN) / for skip testmode

[OnFrame_Disabled]

 

Pour les puristes qui aiment naviguer dans les testmode pour faire leurs réglages :

 

[OnFrame]
$Loop Fix (JPN)
0x8002EA28:dword:0x60000000
0x8002EA34:dword:0x41820158
$Slowdown Fix (JPN)
0x80086768:dword:0x60000000

[OnFrame_Enabled]
$Loop Fix (JPN)
$Slowdown Fix (JPN)

 

Faire un copier coller dans le fichier SBNL.ini et ça fonctionnera à 60 FPS

 

En cas de doute, supprimer le contenu du dossier "users\Triforce" avant de relancer le jeu

Le 12/02/2023 à 23:04, Trymado a dit :

Quelqu'un aurait un pack prêt à l'emploi en 5.0 fonctionnant avec l'ensemble des jeux MK GP1 & 2, FZERO AX, Virtua Striker 3 & 4

Je suis en train de m'arracher les cheveux pour faire fonctionner tout ca, soit 1 marche mais pas les autres, soit j'ai des erreur dvd, bref j'ai tester au moins 5 versions différentes c'est un enfer.

 

Merci beaucoup

C'est pourtant très simple, Billy...

 

Quand tout marchera, ce sera déjà plus simple.

De plus, il ne faut pas le voir comme un émulateur clé en main. Il te faut autant de répertoire que de jeu (1 rep par Borne)

Hello, I test TriCard for my cabinet. Any idea for this loop ?

I delete file in triforce folder, but nothing...

Il y a 22 heures, mamefan2018 a dit :

I didn't notice any performance issues in most games  .. except of course when you run the game the first time and the shaders r caching ..

as for mario kart games at first i didn't see any problems at all .. but when i disabled the test menu patch i noticed slowdowns in mario kart 2 after a couple of mins in attract mode ...didn't notice any slowdowns in the first game ..

but if i enabled the test menu patch the game runs fine  ...

and of course you can always use the older version for the mario games ....and even f-zero .. they run perfectly fine on it ..and use the latest version for vs3 and vf4/2006 because the controls r fixed for these games.

Hello,

 

It's not Shaders caching. With TestMode (original wait 60sec), MK1 is'nt 100%.

With patch for no 60sec wait, it's run at 100%

 

With the new version, checking testmode = Game Lag. FPS are at 76%... No with 2023/01/24 version. This new version save TestMode Data, it's probably this

 

 

i'm not really sure what is causing this problem .. but the card is created and it keeps working fine as long as the game is not restarted .. and i tried to save state and it didn't work ..the game froze .

To bad. To be sure game write in file and read in ram, go to your folder and delete your card after game over (during attract mode). insert coin, and your card is read ... without file 🙃

 

No solution for this

Il y a 8 heures, mamefan2018 a dit :

 

it could be a bug but it could be how the machine works ... it just keeps working as long as the machine is on .. and maybe that is why there is a memory card option to save any progress and can be used  later ..and even used with the home version.

 

Ok, I test and... It's bug.

When user removed card, the reader "read" Ram. So cruel for anothers users. it's not how the machine works.

 

It's issue.

Le 26/01/2023 à 23:27, mamefan2018 a dit :

yep with f-zero the card stops working after restarting a couple of times ...and you have to create a new one ...not sure why this is happening since the mario kart memory cards r working fine with no problems at all.

By analyzing, I understand that the "tricard_SBGG.bin" file is not read. Only the contents of RAM.

When you restart a game without quit app after zero credits, the RAM is read again. Restarting Dolphin clears the RAM. "tricard_SBGG.bin" is ignored.

 

BUG?

 

Only save state to bypass problem...

il y a 5 minutes, hippopippo a dit :

it is normal by selecting "am baseboard" the native inputs are used (otherwise the arcade games won't boot), while for the WII/GC games emulation you can configure it as you like

Yes, for standard controller keys :

 

karting game

Z = test mode + coin (it's an error ?)

X = service

Analog left stick : left - right - up - down

A = item

B = cancel button

R = Gas

L = Brake

 

il y a 59 minutes, `kingston Ramsey a dit :

how to setup controls for this it seems weird to figure out

 

Ok, put PORT 1 "standard controller". Configure your key and save.

So, put PORT 1 "AM_BASEBOARD" and quit.

Salut,

Créer un dossier Dolphin MKAGP1 uniquement pour ce jeu

 

Salut @Ducon2016, Merci pour la version 309 Patchée de MKAGP1. Cependant, il manque le fameux bouton "B / Cancel" qui permet de descendre et monter lors des options. Peux-tu l'activer STP ?

Salut a tous,

 

S'agit-il d'un spoil de l'annonce de SEGA ? Bizarre vu la date de la vidéo

Merci pour ces images

 

edit :

Non, l'annonce de ce jour est pour la mini mégadrive 2 et ses 50 malheureux jeux...😑

OK,

 

Test to use monitors files from "BBCS2" in "BBCS1" and update your "jvsloader and JVSEmu" to v1.9. Maybe work ?

OK,

 

Have you delete DX files inside bbcs2 folder ? it's compilated files for woorking with specific hardware. Delete (or keep a backup) and test this. The files into the folder hook the true files of you hardware.

 

Bye

il y a 35 minutes, Persona6Arena a dit :

Now, if only I could find a way to fix the stages on Continuum Shift I... 

 

Hello

 

TTX Nesica hardware use Nvidia card. Are you tested for remove glitch ? Your Acer Nitro 5 use AMD chip, right ?

 

Bye

Il y a 5 heures, R.R.Z. a dit :

Same here I wish there was a way to remove that offline blue bar completely from bb cs2(1.1)and the 1 from f-exl(1.3.1)

Hello,

 

Use nesica unlocker for remove blue bar of bbcs2 1.11

Bravo à Houb pour cette trouvaille.

Salut,

 

Ca doit se passer par la :

 

regedit

HKEY_CURRENT_USER\Control Panel\International

 

la valeur sDecimal peut se changer en ligne de commande

Je ne garantie rien. Ce n'est pas mon lien que je vous partage.

Tu peux supprimer les posts précédents.

@WildWolf

 

Si tu peux faire un lien crypté du dernier Dump que j'avais posté, je ne sais pas faire :

 

mega://enc2?QBL9yojrrvdZs0tusP2jJFfE-mnGpQSnijPYQgIYzNNjBEhFRLCO313kzs0Hwm7I44MrWraFC1StvVhO17vjjA

 

@+

Pas humain celui-là !!!

 

 

Bonjour,

 

Je lance ce sujet pour partager des vidéos fun sur l'arcade et les jeux. Alors n’hésitez pas à l'alimenter :