Jump to content
linglang

[Tuto] Let's go Jungle, install, AMD fix.

Recommended Posts

This is all I got probably kind of weak but I can play quite a few Teknoparrot games (although I can't get the graphics right in Luigi's Mansion Arcade) I'm not real advanced with computers and don't know what kind of GPU that is. 

 

Processor    Intel(R) Core(TM) i3-7100U CPU @ 2.40GHz, 2400 Mhz, 2 Core(s), 4 Logical Processor(s)
 

I already followed a guide to change it to max performance in settings. Maybe I just can't play it. 

Edited by Jayinem

Share this post


Link to post
Share on other sites
1 hour ago, Jayinem said:

i3-7100U CPU

https://ark.intel.com/content/www/us/en/ark/products/95442/intel-core-i3-7100u-processor-3m-cache-2-40-ghz.html

Which has a Intel HD Graphics 620 onboard, so my guess is most games need the dedicated GPU to work properly, but windows on your laptop gives priority to the HD graphics 620 IGPU

Check link i gave you

 

Luigi's Mansion, works at 1920x1080 resolution, maybe there is a patch to lower needed resolution, search

 

Share this post


Link to post
Share on other sites

The problem is my computer doesn't have anything that first link says. It says open graphic properties I did that. It says open advanced mode I have no such thing on mine there's no screen to choose that. Then it says go to 3D options my options there are nothing like that tutorial says. What I do have is

 

Conservative Morphological Anti-Aliasing and the options are Override Application Default Settings, Enhance Application Default Settings or turn off. Multi Sample Anti-Aliasing Use Application Default Settings or turn off, Anisotropic Filtering Use Application Default Setting 2x 4x 8x 16x, and vertical sync Use Application default settings or use driver settings. That was all under Application settings, there's also Global Settings which only has Application Optimal Mode which I have enabled. 

 

None of that is in that guide so I don't know what to choose. 

 

 

Share this post


Link to post
Share on other sites

Je veux jouer à Let's Go Jungle Special. Mon problème est qu'il ne me laisse pas jouer, même si je touche les boutons de ma wiimote comme une arme à feu, cela n'a pas d'importance, c'est le seul jeu qui ne répond pas aux boutons ou quoi que ce soit, je joue Lets go jungle et let go island et ils vont bien- . Je télécharge les patchs d'insertion mais 24 crédits apparaissent et ça baisse mais je n'arrête pas de dire le bouton que sa fonction ignore. Aidez-moi?

Edited by susoarkangel

Share this post


Link to post
Share on other sites
En 4/11/2019 a las 6:46, ducon2016 dijo:

 

I have the same problem. First player works fine, but second player does not start. Is it a known issue or is there a way to make it work?

 

The game works but the screen is black only can heard the game

 

What should i be doing wrong?

 
 
Edited by blackhat

Share this post


Link to post
Share on other sites
En 18/4/2020 a las 7:07, pillemats dijo:

i have a problem:

only black screen with lgj_final

the game starts well and i can see in game the hud display, but the rest is black....

 

i am using an gtx1050ti and intel core2duo

 

please help

 

 

I have the same problem

 

Have you been able to make it work?

 

Regards.

Share this post


Link to post
Share on other sites
On 5/31/2020 at 6:13 PM, susoarkangel said:

Je veux jouer à Let's Go Jungle Special. Mon problème est qu'il ne me laisse pas jouer, même si je touche les boutons de ma wiimote comme une arme à feu, cela n'a pas d'importance, c'est le seul jeu qui ne répond pas aux boutons ou quoi que ce soit, je joue Lets go jungle et let go island et ils vont bien- . Je télécharge les patchs d'insertion mais 24 crédits apparaissent et ça baisse mais je n'arrête pas de dire le bouton que sa fonction ignore. Aidez-moi?

I have the same problem. Let's Go Jungle works fine, Let's Go island works fine, but Jungle Special does not allow any controls. The game loads but I cannot start the game. Controls are setup in Teknoparrot using X360 controller.

Share this post


Link to post
Share on other sites
En 3/6/2020 a las 21:24, Mcfilmmakers dijo:

I have the same problem. Let's Go Jungle works fine, Let's Go island works fine, but Jungle Special does not allow any controls. The game loads but I cannot start the game. Controls are setup in Teknoparrot using X360 controller.

Résoudre avec le patch Trymado, j'ai suivi les instructions et cela fonctionne correctement pour moi

Share this post


Link to post
Share on other sites
11 hours ago, susoarkangel said:

Résoudre avec le patch Trymado, j'ai suivi les instructions et cela fonctionne correctement pour moi

 

Lequel? Pas besoiin le shader fix, je suis avec nvidia. le coin mod ne donne aucun instruction donc je ne sait pas quoi faire avec. Inverted mouse n'est pas mon probleme..

Share this post


Link to post
Share on other sites

I'm getting this, not sure what I am doing wrong. I got GameLoader to run Operation Ghost, but Lets Go Jungle seemed different, a lot of the settings were grayed out.  All my configurations are just like the ones set up in the beginning of this tutorial. Sorry I'm a total noob at GameLoader

image.png.5165216e2bd64e2c1f86c3f7cf36d9b1.png

 

 

Edited by mastersamman
small pic

Share this post


Link to post
Share on other sites
On 6/3/2020 at 3:24 PM, Mcfilmmakers said:

I have the same problem. Let's Go Jungle works fine, Let's Go island works fine, but Jungle Special does not allow any controls. The game loads but I cannot start the game. Controls are setup in Teknoparrot using X360 controller.

You need to go into service mode and change "ticket" to "coin". Then it will let you insert a credit and then start.

 

Hope you don't have a high hz monitor though. Game runs too fast on monitors above 60hz, frame limiters don't seem to slow it down either.

 

 

 

Share this post


Link to post
Share on other sites

Good evening everybody! i was directed to this forum to ask for help with lets go jungle on teknoparrot ver .392.

 

I'am able to run various games including lets go island with no problems but no matter what i try, lets go jungle will be a black screen with audio only.

 

My specs are Lenovo M93p tiny with i5-4750t with 8gb ram and intel4600hd graphics.

 

I have downloaded different dumps including one on here but to no avail.  Any help would be much appreciated thank you.

Share this post


Link to post
Share on other sites
Le 30/06/2020 à 00:49, jedi1972 a dit :

bump

 

Not sure but I think it is relative to your gpu. It's recommanded to use an nvidia gpu the most part of the time with all these games... 

Share this post


Link to post
Share on other sites
13 hours ago, ginzu said:

 

Not sure but I think it is relative to your gpu. It's recommanded to use an nvidia gpu the most part of the time with all these games... 

 

Thanks for the reply ginzu.  

 

I thought it might be that reason and that's the frustrating aspect of it because i am able to play quite a number of games via teknoparrot. Funnily enough, including Lets go island!

 

oh well, that's the nature of emulation.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×