hasse

On 2/28/2022 at 3:28 AM, Lesteph25 said:

HUM, so it would be above all a problem of screen and retinal persistence.
what size is your monitor?
which slab? (IPS, VA, etc.)

try to activate the scaling by GPU... on certain configuration, it can improve the visual.

but the best advice I can give you (after spending years...yes...years...adjusting all over the place to try to mitigate this effect (which comes a lot from the eyes in the end) , it's to buy you a 120Hz screen. and even with a screen at 1200€, you will be a little disappointed (I did AAA on a 5 difficulty, and AAA on a 7 difficulty this weekend, so... . not that bad anyway ^^,)

 

what does your motor check look like?
59.9998 and moving very fast? the last 2 decimal places?

 

My monitor is 21.5 inches and IPS.
I'm going to play with the settings you gave me for now.

What should I do if I have a sound gap?
I have it set to Vsync-ON
When I turn Vsync-OFF, the afterimage of the object remains.

10 hours ago, Lesteph25 said:

- not use max framerate !!!! terrible for IIDX.

- not use low latency mode

 

 

Vsync : ON

resolution : 1280x720 and look in the résolution Windows option if your not at 59Hz ! if this , turn to 60Hz  and

 

 

your monitor is 60hz ? not a 100 or 120 hz

if 100 Hz (fake 100Hz : change the hdmi imput name for PC ou GMAE

IF 120 Hz, patch your dll for 102hz

 

I've tried those methods, but the problem still persists.

my monitor is 60hz.

54 minutes ago, philtrum1 said:

Max frame rate setting check.and... V-sync on.

As you said, I tried the following settings

Max frame rate : 60 FPS

V-sync : on

After all, when I look at the falling of objects and bar lines,

it feels strange compared to the old chassis I usually play on in game centers.

What settings do other people use who play at 60FPS as I do? 

Il y a 11 heures, Faq_U a dit :

パッチャーのldjで力120hzのタイミングを削除してみましたか？

@Omar2

You mean the check here, right?
I tried turning the check off, but it did not solve this problem.

Of course, I have overwritten the local files with the modified patch.

My GPU settings are as shown in the image.

Are there any other possible causes?

I'm using a 60 Hz monitor made by LG.
When I check the monitor at game launch, I get 60FPS.
However, there is an afterimage effect on the knots. The drop speed is also fast.
I would be satisfied if I could get the same performance as the old chassis.
I've looked at the GPU settings, patches, and configs, but I haven't found a good solution.
Please let me know what the solution is.

(The version I'm playing with is LDJ-2021083000)

il y a une heure, ryuzo7980 a dit :

do this basically

I was able to set it. Thank you.
However, the specs of my computer are garbage.
Is a graphics board required?

Can anyone please tell me the setting to turn off BGA?
The object looks distorted probably because the FPS is down.