Cellinarac

I'm pretty sure everything is setup right, I know I have been trying things for a while now, I've even tried using the IPV4 from my connection to my roughter, the IPV4 I get when I do a ipconfig check, I've tried changing various subnet settings but for some reason after switching to this segatools, it doesn't seem to work, segatools-v004 downloaded from http://www.emuline.org/topic/1659-arcade-pc-initial-d-arcade-stage-zero-sega-nu-2/

2 hours ago, Onkel said:

Segatools.ini

[io3]
; Input API selection for JVS input emulator.
; Set "xinput" to use a gamepad and "dinput" to use a steering wheel.
mode=xinput
; Automatically reset the simulated shifter to Neutral when XInput Start is
; pressed (e.g. when navigating menus between races).
autoNeutral=1
; Use the left thumbstick for steering instead of both on XInput Controllers.
; Not recommended as it will not give you the precision needed for this game
singleStickSteering=1
; Adjust scaling for steering wheel input.
;
; This setting scales the steering wheel input so that the maximum positive
; and minimum negative steering inputs reported in the operator menu's input
; test screen do not exceed the value below. The maximum possible value is 128,
; and the value that matches the input range of a real cabinet is 97.
;
; NOTE: This is not the same thing as DirectInput steering wheel movement
; range! Segatools cannot control the maximum angle of your physical steering
; wheel controller, this setting is vendor-specific and can only be adjusted
; in the Control Panel.
restrict=97
 

well, first I tried adding those lines to the old segatools.ini, that caused the whole thing to not load anymore, then I found and downloaded new version of segatools, coppied that to the dir the old was in, setup network and everything per OP, now all I get is network error which makes no sense being I kept my old segatools.ini and coppied that info exactly the same.... I did notice another option in the new ini that wasn't in the old, 
Insert the path to the game Option directory here (contains OPxx directories)
option=

not sure if that has anything to do with it or not, but that doesn't say it's network related

On 11/16/2019 at 10:59 PM, Kobe46 said:

Anyone got a solution for the two stick steering ?

Only one stick gives 50% in test mode the second stick gives the other 50%   

did anyone ever get this fixed? nearly impossible to drift having to use both sticks to get 100% steering
thanks!

a while later......

changing the input from xinput to dinput gives 100% steering range on the single stick, however the gas/brake I can't get setup to work right to save my life lol
Using xbox 360 controller. no matter how I assign the Axis for accel/brake it finds any axis as being half pressed and there seems to be no way to get the top triggers set to left/brake, right/gas because it sees it as single axis "RZ"

I also found out the "accelaxis" and 'brakeaxis" do the exact opposite. accel actually changes control for brake and brake changes control for gas lol