Aller au contenu

khoubash

GamerLine
  • Compteur de contenus

    46
  • Inscription

  • Dernière visite

  • Jours gagnés

    1

Messages posté(e)s par khoubash

  1. En 27/3/2019 a las 17:32, defre1976 dijo:

    bbcv.jpg.5b4a36864f818ac54e45642cd8b1eacd.jpg

    uh oh , i can dream ha B) .  But on the other hand i find 100 euro for 1 gun to much . Not worth it .

     

    I have 2 wiimotes with guns and a dolphinbar . And its working perfect together with touchmote and demulshooter .

     

    My problem is hyperspin . I have 2 xbox 360 controllers , 1 logitech G25 wheel .

    So touchmote emulates xbox 360 controller to wiimotes .

     

    When touchmote is actif , i will see 4 xbox controllers and 1 G25 wheel . Here is the problem . If i don't connect the 2 original xbox 360 controllers . Then the 2 emulated wii controllers will be in position 1 and 2 in demulshooter . while i saved them for position 3 and 4 . Because my original xbox 360 controllers where connected before i turn on touchmote . 

     

    It works perfect if i turn the controllers in correct order and then start hyperspin .

    But then still you have a problem , when you close the game that use the touchmote and demulshooter . When you exit the game , i can not control hyperspin anymore with the original xbox 360 controller .

     

    so what should happen , if i want to play a shooting game , for example golden gun . It should first start touchmote automatic followed by demulshooter , then the game in teknoparrot .

    It works almost in rocketlauncher , touchmote starts together with demulshooter , but game don't start from teknoparrot , so i am stuck here .

    And this is because i add touchmote , if i remove it in rocketlauncher , then game start together with demulshooter .

     

    And offcourse it should kill touchmote when i exit the game , otherwise the position of the controllers will be messed up again .

     

    Thats why i am litte interested in aimtrak or sinden light guns . But i found them expensive . pffff 200 euro for aimtrak . And then the reviews are not so super .

     

    I you know how to start touchmote demulshooter and golden gun teknoparrot , i would be very happy :very-good:

     

     

     

     

    The aimtrak is a Bullshit, I have one instaled in an Original Namco gun, it works fine but you have to be a mast, if you move from the place where you calibrated it is unbalanced, and better not speak of the kit of aimtrak recoil, other shit, the best thing that I recommend is to buy only the pcb and install it inside an old Namco playstation gun or the other alternative, wait for this new gun to come out. Ultimarc has become very rich selling the aimtrak light gun , because its manufacture does not exceed 25 dollars. The big problem is that the geeks don't repair spending even if we are hungry, we only care about satisfying our whims and no matter the price. I hope this new creator does not abuse like him.

  2. xs4all4me

     

    Today i made a clean installation with DaytonaLaunch3.3 (patched) .rar and everything is the same, but it doesn't matter, it's not very important either. I have tired of so much searching without result. Here i leave all my configuration + the ini file.

    The last picture is of my DK2 file, when opening the file, there is no data. Thank you very much for all your attention.

     

    x360ce.ini

     

     

    1.png

    2.png

    3.png

    4.png

    5.png

    6.png

    7.png

  3. hace 20 horas, xs4all4me dijo:

     

    Correct, I didn't do the re soldering as I wanted to keep the original cables as is, so I just basically swapped the cables out, much cleaner.

    You can also purchase this little device:

    http://derekspearedesigns.com/g25-to-g27-shifter-adapter.html

    I ordered one, it hasn't arrived yet but the G25 shifter turned up first, couldn't wait for the above adaptor to arrive and after some googling, found out that I didn't really need that adaptor and just a simple cable swap.

    Oh well, now I have no use of this adaptor when it arrives :( This adaptor is good for those that don't want to either re solder the wires or swap the cables out.

    You can easily sell the adapter online on eBay or a forum.

  4.  

    hace 20 horas, xs4all4me dijo:

     

    Interesting, asking the obvious, I'm assuming you using the "DaytonaLaunch3.3(patched).rar" files on the first page?

    Your Daytona.exe is patched as per the instructions in the above file?

    And your launching the game using DaytonaLaunch.exe file?

    Here i attach the screenshot the configuration of the file in xbox360ce, in the daytona folder i launch the D3LauncherCL.exe.

    Regarding the shifter, here in Spain it is almost impossible to find for sale only the G25 shifter, very scarce. My G27 shifter has it integrated into the gearbox of an arcade machine, a hard job to fit it. :what: :furax:

    I show you my arcade cabinet, that i have built with the modified G27 steering wheel.

     

     

     

    hh.png

     

    G27 shifter

    cc.jpg

    ghg.jpg

    sfsdf.jpg

     

     

     

     

    kijhgiuh8.jpg

    hjkhjh.jpg

  5. En 18/3/2018 a las 1:24, xs4all4me dijo:

     

    I'm still trying to get force feedback working but it doesn't seem to work, I followed what people have suggested on here but still no good, I will keep trying.

     

    As for the shifting, yes I got it working, in xbox360ce change the following.


    X = 1st Gear
    A = 2nd Gear
    Y = 3rd Gear
    B = 4th Gear

     

    Since our G27 shifter is a 6 gear H pattern, it's up to you how you want to setup the gears:

    Example:
    1 3 -

    2 4 -

    - 1 3

    - 2 4

    1 - 3

    2 - 4

     

    FYI:

    When they released the Logitech G27, for some odd reason, they removed the Sequential (Up and Down shifting) feature that was in the previous G25 model. This was a great feature for games that require/uses Sequential shifting.

    Did you know the G25 shifter is 95% the same as the G27 shifter? Only difference is a mechanism that changes from H pattern to Sequential and two wires. I just recently purchased a cheap G25 shifter only from eBay and the only mod you need to do is swap the cables over. There is plenty of YouTube vids that show you how to take apart the shifter, and it's as simple as unplugging the cable, so the G27 cable goes into the G25 and that it. So now I'm rocking a G25 shifter on my G27 Steering wheel and now have the best of both worlds for shifing gears in racing games :) If you can find one and know how to use a screw driver, I really recommend this mod.

     

    Now as for the Km/h, yeah I tried getting into the test menu to see if there is a region setting on there, but can't get the test menu working yet so I will keep trying.

     

    UPDATE:

    Managed to get the TEST menu working, had to change the compatibility mode to Windows 8 (I'm on the latest Windows 10 build) for the C:\Sega\shell\Shell.exe and also need to install DESKEY (DS2) as per instructions on the first page, "T" is to enter and "Y" is to select.

    Didn't find any reference to SPEEDO, but I did find the localisation options which are the language selections, tried changing to other languages but the speedo didn't change.

    xs4all4me

    Yes, i have the same configuration of the shifter in xbox360ce, the shifter works in xbox60ce but in game always in 1st, i can't change the speed. This is my configuration:

     

     

    shift.png

  6. hace 13 horas, xs4all4me dijo:

    Help in trying to change the Speedo to Km/h.

     

    C:\Sega\shelldata\GameSettings.ini

    Below setting doesn't work.

     

    SPEEDO=Km/h

     

    I've tried:

    KM/H

    KM/h

    Km/h

    Km/H

    km/h

    Kp/h

    KP/H

    kp/h

     

    I'm using Bruce's settings HERE.

     

    Unless this game was never released in countries that uses Km/h and was left out?

    I can´t access to test mode, but if you can change the region? Maybe you can change the metric.

  7. hace 13 horas, xs4all4me dijo:

     

    To change view, in xbox360ce.

     

    Since you have a G27 like me, change the following in the Controller 1 tab:

     

    Button 1 = D-Pad Up

    Button 3 = D-Pad Left

    Button 4 = D-Pad Right

    Button 2 = D-Pad Down

     

    The above assigns the 4 red buttons on the shifter to change view, I mapped the buttons just like the arcade, from left to right, Full, Bonnet, Rear Behind, Rear Behind Far.

     

    hace 13 horas, xs4all4me dijo:

     

    To change view, in xbox360ce.

     

    Since you have a G27 like me, change the following in the Controller 1 tab:

     

    Button 1 = D-Pad Up

    Button 3 = D-Pad Left

    Button 4 = D-Pad Right

    Button 2 = D-Pad Down

     

    The above assigns the 4 red buttons on the shifter to change view, I mapped the buttons just like the arcade, from left to right, Full, Bonnet, Rear Behind, Rear Behind Far.

    @

    xs4all4me

    Work. Thank you very much.  A question, do you have the force feedback and the shifter running?

  8. En 13/1/2018 a las 0:37, hunico000 dijo:

    I make all, but i don’t have ffb...😩

    logitch g27

    Hi, please can you help me? I have G27 but  i can´t press the start button, i have the xbox360ce but don´t work.

     

     

    Edit: It work, when you configure the xbox360ce, save and rename the file xinput1_3.dll to xinput9_1_0.dll

    Thank you guys.

     

    How to change the view?

×
×
  • Créer...