Vmundo

On 8/24/2022 at 3:31 AM, MASHIHRO said:

 

Thank you Vmundo

With CHUNITHM he now has a custom firmware TASOLLER.

However, when playing the game, the screen blacks out at an unspecified time and he gets error code 6401.

I'm trying to replace the contents of the bin folder with a file that can be downloaded from this thread, but it doesn't work

Also, I do not understand how to write segatools.ini when I want to use TASOLLER's CFW

[newio86]
path=chuniio_tasoller.dll
;path=chusnio_x86.dll

[newio64]
;path=chusnio_x64.dll
path=chuniio_tasoller_x64.dll

[aime]
aimPath=DEVICE\aime.txt

[chuniio]
path=chuniio_tasoller.dll
;; For Chunithm NEW (segatools_64.ini)
path=chuniio_tasoller_x64.dll

;; Uncomment for Chunithm NEW
chusan=1

This is the segatools.ini I'm using, and Tasoller is running in the game for the time being, but is it correct?

 

If you downloaded chunithm from the guide on page 17, theres a folder called "手台設定", the folder inside that called "chusanio" has the files you can just copy and paste into bin. 

in my segatools.ini, I just have this, not [chuniio]:
 

[newio86]
path=chusnio_x86.dll

[newio64]
path=chusnio_x64.dll

4 hours ago, MASHIHRO said:

Phenomenon: Windows Device Manager
I can't get rid of the warning at "I SAY NYA-O"

 

Purchase TASOLLER and DAO original TASOLLER_HOST_MCU_V2.01
TASOLER_LED_MCU_V2.0.bin
installed the
(Touch Firmware is not installed)

I tried playing CHUNITHM, but it doesn't react well (Slide judgment sometimes breaks off)

to see if it improves
I installed custom firmware.

Even if I install the driver with zadig-2.7
Windows device manager
The warning at "I SAY NYA-O" does not disappear → (TASOLLER cannot be used with CHUNITHM)

my environment is
CPU RYZEN5900X
M/B ASUS ROG Strix X570-E Gaming
will be

As mentioned in previous threads and custom firmware manuals
I tried adding a USB card from PCI-EXPRESS, but the situation did not change

This card has a Renesas D720202
It seems that a controller called

If you have a similar environment and solved the problem by adding a PCI card, what kind of controller is installed?

Or is there a solution other than adding a USB card to PCI?

yea, that host fw doesn't work with AMD CPU's, use this one instead, installs the same way
TASOLLER_HOST_customize_FW_AMD_20210920.bin

21 hours ago, bakaaa said:

I recently bought my Tasoller, so it has firmware 2.0, I'm scared that if I install the custom firmware, it'll overwrite the 2.0 firmware and I would have to get the UART burning cable.

In that guide you linked, there is a folder inside the chunithm folder called "手台設定" that has a guide as well as the chusnio dlls and other files for the CFW, just make sure to use the default newio fields instead of the keyboard ones in segatools. You don't need the UART cable, or need to worry about overwriting the base firmware. From when I was installing it, the CFW is for the host and LED FW, which can be done through the USB ports on the tasoller, and you can revert to the original FW for that anytime with no problems. It's only the touch firmware that is installed with the UART cable, which is not needed to install the CFW. The only issue I ran into was needing a different host FW for AMD cpus. 

Using a tasoller, how do you get the LED colors to sync with the in game buttons? I've looked through this thread, but its a bit confusing to navigate which one is the actual solution, this is for new plus

Does anyone know if it's possible or how to enable course mode? I don't have that option after scanning the aime card.