Jump to content

[Tuto] Sega Golden Gun.


linglang
 Share

Recommended Posts

Sega golden Gun is the easiest of the shooter / gun games to configure.

 

Here we go:

 

My settings used in Gameloader ALL RH version 0.3.3.3 and Teknoparrot 1.0.0.125

You can try to use a up to date version of the above applications.

 

Settings used in Teknoparrot 1.0.0.125

https://ibb.co/fGtWtHW
https://ibb.co/cwqVLDZ
https://ibb.co/g9DHNF2

 

Settings used in Gameloader 0.3.3.3

https://ibb.co/QXy7Xc5
https://ibb.co/N9jHsWT
https://ibb.co/gySfVX1
https://ibb.co/PWzsb9B
https://ibb.co/2825ft7
https://ibb.co/wcC9dmG
https://ibb.co/VDjSkRf
https://ibb.co/C2kvQ2Z
https://ibb.co/dDPFs7v
https://ibb.co/ZGtW5zX
https://ibb.co/6YnDjy1

 

And a BIG thanks for the people who originally uploaded the games, we all can enjoy (if you do it right) !!!

And of course all the people involved in, the game loaders and JVS I/O emulation applications we use, and all the people I "forgot".

 

Executable file is, /Game Folder/exe/RingGunR_RingWide.exe

 

Enjoy.

 

I hope that this tutorial helps other people out.

It takes you a few moments to read, but it took me all night to figure it out.

When you get the game working, thanks to this "manual", please give a thanks at this post.

:very-good:

 

Also look at the posts below, some members / people add helpful information, thank them also .....

Edited by linglang
Link to comment
Share on other sites

 

Getting an error on each link.

Link to comment
Share on other sites

 
 
  • 5 months later...
 
 
  • 2 weeks later...
 
49 minutes ago, yt6t said:

second player in lets go jungle?

I have no idea, I had to hex edit the HOTD .exe to enable the second player.

The below instructions are for HOTD !

"Just open the .elf file with any HEX editor, go to file offset 0x2D5827 and replace 0x74 by 0xEB That's all."

 

I have no idea, what to edit at what address for LGJ to enable second player, if it is needed.

Link to comment
Share on other sites

 
  • 2 months later...
 
  • 5 weeks later...
 
  • 2 months later...
Il 25/2/2019 Alle 02:53, linglang ha scritto:

Sega golden Gun is the easiest of the shooter / gun games to configure.

 

Here we go:

 

My settings used in Gameloader ALL RH version 0.3.3.3 and Teknoparrot 1.0.0.125

You can try to use a up to date version of the above applications.

 

Settings used in Teknoparrot 1.0.0.125

https://ibb.co/fGtWtHW
https://ibb.co/cwqVLDZ
https://ibb.co/g9DHNF2

 

Settings used in Gameloader 0.3.3.3

https://ibb.co/QXy7Xc5
https://ibb.co/N9jHsWT
https://ibb.co/gySfVX1
https://ibb.co/PWzsb9B
https://ibb.co/2825ft7
https://ibb.co/wcC9dmG
https://ibb.co/VDjSkRf
https://ibb.co/C2kvQ2Z
https://ibb.co/dDPFs7v
https://ibb.co/ZGtW5zX
https://ibb.co/6YnDjy1

 

And a BIG thanks for the people who originally uploaded the games, we all can enjoy (if you do it right) !!!

And of course all the people involved in, the game loaders and JVS I/O emulation applications we use, and all the people I "forgot".

 

Executable file is, /Game Folder/exe/RingGunR_RingWide.exe

 

Enjoy.

 

I hope that this tutorial helps other people out.

It takes you a few moments to read, but it took me all night to figure it out.

When you get the game working, thanks to this "manual", please give a thanks at this post.

:very-good:

 

Also look at the posts below, some members / people add helpful information, thank them also .....

 


Hi Gameloader ALL RH not open for me on Sega Golden Gun folder, it work in all other games same pc.. i have to do something??

Link to comment
Share on other sites

 
 
 
 
 
15 ore fa, emulor ha scritto:

just backup RingGunR_RingWide.exe, decompress, use jconfig to setup keys, and run the RingGunR_RingWide.exe

 

Hi i have done this but game not load stuck on mainscreen and not go full window size.. you can help?
tnx for your time

Link to comment
Share on other sites

 
 
4 ore fa, emulor ha scritto:

In jconfig you have option for windows mode, disable it.

And install:

https://www.pcgameshardware.de/Windows-Software-122001/Downloads/All-in-One-Runtimes-Download-1164729/

Choose your OS

And K-lite Codec Standard

https://codecguide.com/download_kl.htm

 

 

Ok Many Tnx but i think i have some problem on this arcade pc.. so i explain better, i have downloaded the all-in-one runtimes on my actual pc it run and start the installer, on my cab i use maximus arcade it not start and not install .. the same for other installers..

Tnx

Link to comment
Share on other sites

 
 
 
25 minuti fa, emulor ha scritto:

If Maximus Arcade is this: https://www.maximus-arcade.com/

(Windows 98 ???)

Itś very limited specifications for run some heavy games

 

I run it on windows 10 i have all configured but im unable to install some things like Direct X SDK becouse i not see the installer ..
i need to see desktop but when exit maximus i only see black screen

Link to comment
Share on other sites

 
  • 2 weeks later...

I applied jconfig and I set my keys and even tried the keys in the readme  and hit every key on my keyboard but the game does not respond for coins or to start.  

Link to comment
Share on other sites

 
  • 5 weeks later...

i can not get the game into full screen no matter what i do is there a file i have to edit to change resolution??????? i have windowed mode uncheck in teknoparrot ui and the game plays fine it just wont load full screen i have the same problem with lets go jungle

Link to comment
Share on other sites

 
 
  • 1 year later...
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...