Jump to content
spiderzsoft

[Arcade PC] Chunithm Crystal / Paradise (Sega NU 1.1)

Recommended Posts

Thank you for the above reply

 

And as my experience before

The custom firmware seems more accurate than the official one

Because someone said that the custom firmware is direct input

Instead of the official one using the keyboard input

So the input delay maybe lower

 

And my question is that

If we update to the 2.0 and the custom firmware is not working

Can't we enjoy the lower input delay advantage from the custom firmware?

Or is the 2.0 improved this problem also?

Share this post


Link to post
Share on other sites
35 minutes ago, hydk789 said:

Thank you for the above reply

 

And as my experience before

The custom firmware seems more accurate than the official one

Because someone said that the custom firmware is direct input

Instead of the official one using the keyboard input

So the input delay maybe lower

 

And my question is that

If we update to the 2.0 and the custom firmware is not working

Can't we enjoy the lower input delay advantage from the custom firmware?

Or is the 2.0 improved this problem also?

I think it's less that cfw has less delay and more that cfw activates before you even touch the panel, keyboard mode/chuniio doesn't have any notable delay to speak of iirc

Share this post


Link to post
Share on other sites
4 hours ago, redalchemy said:

Wait doesn't that mean we can update to 2.0 and only install the LED custom firmware and leave the dao on the 2.0 host firmware and it will work fine with the 2.0 update and still show the LED menus?

 

I think the problem is that the CFW uses a different chuniio.dll that changes both input and LED. So if you use 2.0 Host with custom LED the LED won't work because you still need to use the keyboard chuniio.dll. If you use CFW chuniio.dll you will probably get the reverse, LED with no input.

Share this post


Link to post
Share on other sites
Le 2021/2/23 à 11:07, paradise a dit :

ver 1.55 leak:
CHUNITHM PARADISE LOST

I'm very surprised, because what a surprise he guessed PARADISE LOST, which is the information announced today! Who are you!?

Hidden Content

    Give reaction or reply to this topic to see the hidden content.

Edited by ROMROM

Share this post


Link to post
Share on other sites
4 hours ago, hydk789 said:

Thank you for the above reply

 

And as my experience before

The custom firmware seems more accurate than the official one

Because someone said that the custom firmware is direct input

Instead of the official one using the keyboard input

So the input delay maybe lower

 

And my question is that

If we update to the 2.0 and the custom firmware is not working

Can't we enjoy the lower input delay advantage from the custom firmware?

Or is the 2.0 improved this problem also?

2.0 has almost the same accuracy with CFW, as I experienced.

Share this post


Link to post
Share on other sites
5 hours ago, ROMROM said:

I'm very surprised, because what a surprise he guessed PARADISE LOST, which is the information announced today! Who are you!?

Hidden Content

    Give reaction or reply to this topic to see the hidden content.

Just check the game files for paradise base lol it was all there

Share this post


Link to post
Share on other sites

Hi I have been able to run Paradise but I noticed that I do not have a lot of World End's chart. Does anyone have the files for them? Thanks!!

Share this post


Link to post
Share on other sites
On 5/6/2021 at 7:01 PM, ROMROM said:

I'm very surprised, because what a surprise he guessed PARADISE LOST, which is the information announced today! Who are you!?

Hidden Content

    Give reaction or reply to this topic to see the hidden content.

.

Edited by Crafty The Fox

Share this post


Link to post
Share on other sites

Hi there, I would like to buy the tasoller. Is there any person who have experience of setting up it to the game?Should I use segatools to do that?

Share this post


Link to post
Share on other sites
2 hours ago, YunXiuRZ said:

Hi there, I would like to buy the tasoller. Is there any person who have experience of setting up it to the game?Should I use segatools to do that?

Yea use segatools, 32key is enabled by default you just need to edit the settings file to actually bind them, or use the cfw with the provided chuniio.

Share this post


Link to post
Share on other sites
2 hours ago, Notacat said:

Yea use segatools, 32key is enabled by default you just need to edit the settings file to actually bind them, or use the cfw with the provided chuniio.

Excuse me, how can I bind the air input? And what it cfw?

Share this post


Link to post
Share on other sites
44 minutes ago, YunXiuRZ said:

Excuse me, how can I bind the air input? And what it cfw?

Air input should already be bound correctly (set your Windows keyboard settings to US layout if you're having trouble).

Cfw is the custom firmware which provides HID lightning, but if your Tasoller is on touch firmware 2.0 it won't work.

Share this post


Link to post
Share on other sites
15 hours ago, Notacat said:

Yea use segatools, 32key is enabled by default you just need to edit the settings file to actually bind them, or use the cfw with the provided chuniio.

Uhmm idk what you're doing but you actually only need the 32key dll. You do not need to edit the controls in segatools.

 

18 hours ago, YunXiuRZ said:

Hi there, I would like to buy the tasoller. Is there any person who have experience of setting up it to the game?Should I use segatools to do that?

You need to set the Tasoller to 32 key mode and then replace your chuniio.dll with the one I posted a few pages ago here. It should be in the Mega folder for the game too. Or get it from the Amazon download page. You do not edit SegaTools to change your controls.

 

13 hours ago, YunXiuRZ said:

Excuse me, how can I bind the air input? And what it cfw?

Custom firmware is better than the 32key dll too. You need to download the ledfix folder that has everything you need. Install the host firmware and the led firmware then use the included zadig program to install the driver to the PC. Then once again replace your chuniio.dll with the one in the cfw folder. This will display the menus through the LEDs on your controller as well. As someone said though, if your Tasoller is on 2.0, it won't work.

Share this post


Link to post
Share on other sites
2 minutes ago, redalchemy said:

Uhmm idk what you're doing but you actually only need the 32key dll. You do not need to edit the controls in segatools.

 

You need to set the Tasoller to 32 key mode and then replace your chuniio.dll with the one I posted a few pages ago here. It should be in the Mega folder for the game too. Or get it from the Amazon download page. You do not edit SegaTools to change your controls.

 

Custom firmware is better than the 32key dll too. You need to download the ledfix folder that has everything you need. Install the host firmware and the led firmware then use the included zadig program to install the driver to the PC. Then once again replace your chuniio.dll with the one in the cfw folder. This will display the menus through the LEDs on your controller as well. As someone said though, if your Tasoller is on 2.0, it won't work.

Ok, thanks for your response

Share this post


Link to post
Share on other sites
1 hour ago, lonelyneet said:

我看不懂英文 怎么办 守着资源干着急

PPXClub? Otherwise, google translate.

Share this post


Link to post
Share on other sites
3 hours ago, lonelyneet said:

我看不懂英文 怎么办 守着资源干着急

你遇到什么问题了?

Share this post


Link to post
Share on other sites
Le 2021. 4. 27. à 07:42, redalchemy a dit :

You need the PCIe card I posted 1 page ago. I had the same issue as you and this fixed it. Just plug this into your PCIe slot and plug the controller into it. 

 

Again, for anyone else reading this. If your Tasoller doesn't work for the custom firmware, purchase a new USB 3.0 PCIe board. 

 

Here is the one I used:

Hidden Content

    Give reaction or reply to this topic to see the hidden content.

 

 

 

 

I bought a USB 3.0 PCIe board last night.

 

And plugged the PCIe board into the x570 motherboard and connected the Tasoller to the new USB 3.0 port.

 

But still it dosen't work user led patch

 

Did I work on it properly? Is it correct to plug the newly purchased PCIe board into the motherboard?

Share this post


Link to post
Share on other sites
Le 2021/5/9 à 13:43, lonelyneet a dit :

我看不懂英文 怎么办 守着资源干着急

你那是啥问题 我这正好在看有无更新

Share this post


Link to post
Share on other sites

Is there a summary of how to installation?

I want to know from download to play.

I have TASOLLER.

I hope you can understand my poor English.

 

Share this post


Link to post
Share on other sites
1 hour ago, nanashi774 said:

Is there a summary of how to installation?

I want to know from download to play.

I have TASOLLER.

I hope you can understand my poor English.

 

Go to page 28 of the forum

Share this post


Link to post
Share on other sites
11 hours ago, ealee said:

你那是啥问题 我这正好在看有无更新

就是一直提示网络处理中让我等 我ip设置的是本机ipv4的地址 dns是 8 8 8 8  8 8 4 4 请问是这两个地方出错了 还是其他地方出错了吗

我看上面的解答说 以管理员身份启动 start.bat但是这样他会提示我 缺少inject 普通打开就没事

想了很久找不到原因 请你帮帮我好吗

Share this post


Link to post
Share on other sites
23 hours ago, FDFD said:

 

 

I bought a USB 3.0 PCIe board last night.

 

And plugged the PCIe board into the x570 motherboard and connected the Tasoller to the new USB 3.0 port.

 

But still it dosen't work user led patch

 

Did I work on it properly? Is it correct to plug the newly purchased PCIe board into the motherboard?

it sounds like you did it right. have you installed the zadig driver?

Share this post


Link to post
Share on other sites
Il y a 9 heures, redalchemy a dit :

it sounds like you did it right. have you installed the zadig driver?

 

Yeah, I did everything in the guide.

 

One thing I doubt is that the device driver shows a "!" sign even though I installed WinUSB on I SAY NYA-O with zadig, but I don't know what's wrong with it.

Share this post


Link to post
Share on other sites

Anyone know minimum GPU for this game? I've got a GT 730 in my project rig now and it only runs about 20FPS in game. Would a GT 1030 suffice? 

Share this post


Link to post
Share on other sites
4 minutes ago, uglystru said:

Anyone know minimum GPU for this game? I've got a GT 730 in my project rig now and it only runs about 20FPS in game. Would a GT 1030 suffice? 

Hidden Content

    Give reaction or reply to this topic to see the hidden content.

Share this post


Link to post
Share on other sites
6 hours ago, FDFD said:

 

Yeah, I did everything in the guide.

 

One thing I doubt is that the device driver shows a "!" sign even though I installed WinUSB on I SAY NYA-O with zadig, but I don't know what's wrong with it.

That's disconcerting to hear. Yea that means it isn't working. Sad to know the fix doesnt work for everyone. You seem sadly unlucky tho because it's worked for several others :( all I can say is try all of the USB ports in the new USB board. I plug my power cord into the wall instead of the other USB.

Share this post


Link to post
Share on other sites
On 5/7/2021 at 1:13 PM, bvb123 said:

Hi I have been able to run Paradise but I noticed that I do not have a lot of World End's chart. Does anyone have the files for them? Thanks!!

.

Share this post


Link to post
Share on other sites

The update to Paradise Lost seems to be a DL from the server without an installation kit.

 

I'm using translation, so I'm sorry if it's strange.

Share this post


Link to post
Share on other sites
il y a 35 minutes, sakuya3423 a dit :

The update to Paradise Lost seems to be a DL from the server without an installation kit.

 

I'm using translation, so I'm sorry if it's strange.

By the way, LOST can do it, but there are no new songs ...

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×