Jump to content

[EMU] PCSX2 P2IO Fork


Recommended Posts

This is a fork of PCSX2 (the PS2 emulator) that works with Konami Python 1/2 and Konami Bemani Python games, which were based off Playstation 2 hardware.

Can be downloaded here:

https://github.com/987123879113/pcsx2

 

Claims to work with Thrill Driver (a Konami Python 2 game) and most of the Python Bemani Games. At the moment there is no compatibility list, plus some games have MagicGate DRM which requires a few bios files which are nearly impossible to find. If anybody were able to supply these it would be greatly appreciated. The closest thing to a BIOS I have found is the KPYTHON.ZIP file for MAME which has the file name "b22a01.u42" Can't figure out how to get any of the bin files I need from that. Download: b22a01.u42

 

You need to use a blank PS2 hard disk file for it to work, download that here: fake_hdd.raw

To load it go into Config > Network and HDD Settings > Check "Enabled" > Click Browse and select the file.


For loading games try converting MAME CHD files using chdman into img and then back to iso and see if that works. 

 

Link to comment
Share on other sites

 
11 hours ago, witherzombie222 said:

This is a fork of PCSX2 (the PS2 emulator) that works with Konami Python 1/2 and Konami Bemani Python games, which were based off Playstation 2 hardware.

Can be downloaded here:

https://github.com/987123879113/pcsx2

 

Claims to work with Thrill Driver (a Konami Python 2 game) and most of the Python Bemani Games. At the moment there is no compatibility list, plus some games have MagicGate DRM which requires a few bios files which are nearly impossible to find. If anybody were able to supply these it would be greatly appreciated. The closest thing to a BIOS I have found is the KPYTHON.ZIP file for MAME which has the file name "b22a01.u42" Can't figure out how to get any of the bin files I need from that. Download: b22a01.u42

 

You need to use a blank PS2 hard disk file for it to work, download that here: fake_hdd.raw

To load it go into Config > Network and HDD Settings > Check "Enabled" > Click Browse and select the file.


For loading games try converting MAME CHD files using chdman into img and then back to iso and see if that works. 

 

coo                   

 list https://www.system16.com/hardware.php?id=831                               This hardware is based on Sony PlayStation 2

Edited by Cool Coyote
Link to comment
Share on other sites

 
 
On 16/01/2022 at 6:31 AM, Cool Coyote said:

interesting tidbit      Kelloggs Vs. Capcom

and other fakes 🙃

http://www.system16.com/hardware.php?id=960

 

Got to love a bit of Kellogs Vs Capcom, it almost makes you wish it was real, it would be grrrreat to beat up that annoying tiger.

Link to comment
Share on other sites

 
 

I am interested in this.... A clean MagicGate dump is all we need for proper Namco System 246 emulation???  

 

alright... I have the system 246 dongle files.. Who wants to help me get this up and running?

Edited by powergyser
Link to comment
Share on other sites

 
  • 3 weeks later...
 
  • 2 weeks later...
 
  • 1 month later...
Le 15/01/2022 à 19:58, witherzombie222 a dit :

Il s'agit d'un fork de PCSX2 (l'émulateur PS2) qui fonctionne avec les jeux Konami Python 1/2 et Konami Bemani Python, qui étaient basés sur le matériel Playstation 2.

Peut être téléchargé ici :

https://github.com/987123879113/pcsx2

 

Prétend fonctionner avec Thrill Driver (un jeu Konami Python 2) et la plupart des jeux Python Bemani. Pour le moment, il n'y a pas de liste de compatibilité, et certains jeux ont MagicGate DRM qui nécessite quelques fichiers bios qui sont presque impossibles à trouver. Si quelqu'un était en mesure de les fournir, ce serait grandement apprécié. La chose la plus proche d'un BIOS que j'ai trouvée est le fichier KPYTHON.ZIP pour MAME qui porte le nom de fichier "b22a01.u42". Je ne sais pas comment obtenir les fichiers bin dont j'ai besoin. Télécharger: b22a01.u42

 

Vous devez utiliser un fichier de disque dur PS2 vierge pour que cela fonctionne, téléchargez-le ici : fake_hdd.raw

Pour le charger, allez dans Config> Paramètres réseau et disque dur> Cochez "Activé"> Cliquez sur Parcourir et sélectionnez le fichier.


Pour charger des jeux, essayez de convertir les fichiers MAME CHD en utilisant chdman en img, puis de nouveau en iso et voyez si cela fonctionne. 

 

 

Hello all have you seet that movie of 24/03/2022 the game boot very good

 

Link to comment
Share on other sites

 

Has anybody had any success with trying this emulator?, it looks super promising if the right bios files can be found which I am assuming just cannot be had from mame and are coded to the actual individual hardware, that is where my knowledge or indeed lack of ends though, so if anybody can help out I would really appreciate it.

Link to comment
Share on other sites

 

For people are interested Thrill Drive 3 now working with Pcsx2  with a incredible good work by people 

Look here

 

My gameplay movie of this wonderful game

 

Link to comment
Share on other sites

 
1 ora fa, soso92 ha scritto:

For people are interested Thrill Drive 3 now working with Pcsx2  with a incredible good work by people 

Look here

 

My gameplay movie of this wonderful game

 

nice news  :)

how to bind  an analog stick ?

Link to comment
Share on other sites

 
Il y a 9 heures, joefish a dit :

nice news  :)

how to bind  an analog stick ?

I was able to configure my G29 steering wheel which works well for left and right steering in test mode calibration.  On the other hand I cannot calibrate my accelerator and brake pedals the calibration is in error every time

Link to comment
Share on other sites

 
3 ore fa, soso92 ha scritto:

I was able to configure my G29 steering wheel which works well for left and right steering in test mode calibration.  On the other hand I cannot calibrate my accelerator and brake pedals the calibration is in error every time

in this way its not so good and 40 gb for just a game from 2004 is crazy

i found the issue with analog stick. its a matter of xinput and dinput. with dinput it works the analog steering using a stick but with xinput is not working. tell that to devs if you can thanks

Edited by joefish
Link to comment
Share on other sites

 

The game works great!
 

Does anyone know how to get coins to work? The game makes a sound when a coin is inserted but it doesn’t register the coin. So far I can only figure out how to play in freeplay mode.

Link to comment
Share on other sites

 
 
 
On 4/10/2022 at 6:55 AM, BlueSupernova22 said:

I managed to get a ddr supernova img file but i have no idea how to set it up. any ideas anyone?

Where did you get that? Btw, you can use same tutorial for TD3 for SN too, which is in archive with TD3 dump and launch info, link is under the relevant VGE video

Link to comment
Share on other sites

 
 
 
  • 1 month later...

Do any of you have intermediate skills using git? I’ve played P2IO on a win 10 laptop which works great however my arcade cabinet runs windows 7 which v1.7 of PCSX2 doesn’t work on. I’m wondering if someone here could help merge the P2IO fork with PCSX2 v1.6? Is that possible?

 

Any help is greatly appreciated! Thanks in advance

Link to comment
Share on other sites

 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...