Aller au contenu
linglang

[Tuto] House of the Dead 4: Alternative install

Messages recommandés

House Of The Dead 4 (Lindbergh)

Works fine on Window$ 10 (1803) and TeknoParrot 1.86 (straight loaded)

I run it with GameLoader (0.3.2.7) and TeknoParrot 1.81 X-MAS Special.

 

 

Lindbergh (BudgieLoader) games do NOT run on other versions of Window$ (8, 7, et cetera) !

 

Run HOTD4_MouseFix.exe as administrator.

Run GameLoader All RH as administrator.

the_house_of_the_dead_4_by_pooterman-dc801qh.png

Edit 14-02-2019

 

The fault in "version 1" of these instructions was:

I forgot to mention,

Run HOTD4_MouseFix.exe as administor.

Run Gameloader All RH.exe as administrator. 

 

I got House Of The Dead 4 working with Gameloader All RH !

 

DOES NOT RUN CORRECTLY ON 1.88 or higher.
(as far as I know, just tested it on version 1.90 no go !

 

So run 1.81 X-MAS Special !

 

Just played it to the "end", "James", I won't spoil it ....

 

I can get it to work with the mouse ,crosshair, dead centre.

I have no idea how to configure it for a second player, second mouse on 1 system.

At the moment,  I can connect a second mouse to the PC, Ds_Diag sees it as a second device.

But in game, both mice, control the player 1 crosshair. 

And I am missing the sound effects of the guns and zombies.

There is only music and dialogue.

 

OK, here is my documentation to get it working.

 

WAIT, this is the long version, here is the shortend version, less to read.

 

Enjoy.

 

 

I use a three button mouse a keyboard and a wireless XBox 360 controller, 

to get the mouse working to aim, shoot, reload and throw grenades.

It should also be possible with only a keyboard and mouse, use Direct Input in TeknoParrot Emulation settings.

For Xbox 360 controller input use XInput in TeknoParrot Emulation settings.
 

Disable the headphone outputs of the Xbox 360 controllers in Window$ 10.

Set the default output to the correct audio output device.

https://www.youtube.com/watch?v=YWX4WxMkDxk

Otherwise the Xbox 360 controllers switch the audio output to their headphone outputs everytime.

Extract the HODT4 .bin file with 7zip or PowerISO


https://www.7-zip.org/
https://www.poweriso.com/

 

Then you need these files.

 

Characters look corrupted ?
Use the shader fix files, place in HOD4/disk0/fs
http://www.emuline.org/applications/core/interface/file/attachment.php?id=4729


Files needed for the test menu, place in HOD4/disk0/elf

(HOD4/disk0/elf/hod4testM_HD.elf)
http://www.emuline.org/applications/core/interface/file/attachment.php?id=4730

 

GameLoader All RH, place the three .exe files in HOD4/disk0/elf/
https://mega.nz/#!4l0EFSDZ!So_xejXzSQEjDaqs6eeSaMW5TYC85jPPlRIzlXdGcGk


Different resolution hod4M.elf files, place in HOD4/disk0/elf/

Use the one needed for the native resolution of your monitor / TV.
http://www.mediafire.com/file/37k3y387vjwgm7u/2+-+HOTD4+game.exe+for+Game+Loader+All+RH.rar

 

Read the readme.txt files included in the compressed files !

 

Out of this thread, thanks to 7zxkv.

 

 

First open 2 - HOTD4 game.exe for Game Loader All RH with 7Zip.

In your HOD4/disk0/elf folder change the extension of you original hod4M.elf to hod4M.elfo

 

Can not see extensions of your files ?

https://www.thewindowsclub.com/show-file-extensions-in-windows

 

Drag the correct resolution hod4M.elf from 7Zip into your HOD4/disk0/elf folder.

Choose the one with the correct native resolution for your monitor.
 

For the Gameloader All RH  to work, you must:

 

1. Put the 3 exe in the folder of a game, in this case, HOD4/disk0/elf

 

2. Launch the Game Loader Installer.exe file (do it once)

 

You will get a Virus warning to see, FAKE !!

 

5c461d5dd209a-Warning2-png-df1fbb0c5712f

 

5c461d5c47c32-Warning1-jpg-55e355f790fe3
 

(Old news, not anymore since version 0.3.2.3 of GameLoader ALL RH)

3. Go to C: \ Users \ USER NAME \ AppData \ Roaming \ Game Loader All RH \ TTX.ini


4. Edit TTX.ini and change the line 

 

[Ignore]
Warning= Agree

 

5. Run Game Loader Installer.exe once again, and install the necesary files

 

6. Run the Game Loader Config.exe file, follow the instructions in the video below

 

On to the next step.
This video shows how to config GameLoader All RH for HOTD4.
https://www.youtube.com/watch?v=7lSFvzd4pfc


HOTD4_MouseFix.zip can be found here, place in HOD4/disk0/elf/
http://forum.arcadecontrols.com/index.php/topic,149714.msg1674784.html#msg1674784

 

"HOTD4_MouseFix.exe" can be start minimalized in the task bar by running the command : "HOTD4_MouseFix.exe -minimized".

 

Crosshair mouse cursors can be found here.
http://www.rw-designer.com/gallery?search=crosshair+cursors&by=new
The filename has to be CrossHair.cur
This file needs to be installed in disk0/elf/sv

 

Onto the next step.

In Game Loader Config on the Update rate Tab, uncheck Update rate mouse cursor hide.

On the Loader Settings 1 Tab, click on Select Folder, and link it to your TeknoParrot folder location.

This should start TeknoParrot.

 

1. In TeknoParrot go to "EMULATION SETTINGS" and uncheck "Use Mouse for gun Games".  
That way you can set whatever keyboard key you want for START, TEST and SERVICE.
  

2. Go to HOTD4 game settings, set your START, TEST, SERVICE keys in "input Mapping" and check "General - OffscreenReload Hack".

Others options are not important so do as you wish.


3. Make sure you link the correct path to hod4M.elf in TeknoParrot.

.....\HOD4\disk0\elf\hod4M.elf for game mode.
......\HOD4\disk0\elf\hod4testM_HD.elf for testmode.

 

4. Now just run "HOTD4_MouseFix.exe" before starting the game.

"HOTD4_MouseFix.exe" can be start minimalized in the task bar by running the command : "HOTD4_MouseFix.exe -minimized".

 

Configure your game settings in TeknoParrot for House Of The Dead 4.

 

Onto the next step.

Demulshooter:

https://github.com/argonlefou/DemulShooter/releases

 

DemulShooter needs.
.NET 3.5 (includes .NET 2.0 and 3.0)

https://docs.microsoft.com/en-us/dotnet/framework/install/dotnet-35-windows-10

 

Do you get error 0x800f081f, like I did ?

Here is the solution.

https://www.youtube.com/watch?v=ZHQqb7IOHZE


https://androidfilehost.com/?fid=1322778262904003837

 

Copy the file microsoft-windows-netfx3-ondemand-package.cab to the root of C:

 

At the Command prompt (run as admin) paste this text, it will install .NET 3.5 if you have error 0x800f081f

 

Dism.exe /online /enable-feature /featurename:NetFX3 /source:C:\ /LimitAccess

 

 

DOES NOT RUN CORRECTLY ON 1.88 or higher !

 

So run 1.81 X-MAS Special !

 

My settings which work for me, on window$ 10 1803 (April) revision, and TeknoParrot 1.81 XMAS Special, XInput joysticks.

https://ibb.co/MM9RpzH
https://ibb.co/NVfFP9P
https://ibb.co/tJXYvf0
https://ibb.co/HhSM66v
https://ibb.co/vDrd2pL
https://ibb.co/7vd9C0t
https://ibb.co/Y7y6xMX
https://ibb.co/xmLm4rV
https://ibb.co/Y2SbBsF
https://ibb.co/2Z3BKgc
https://ibb.co/3mq6m8g
https://ibb.co/Z29118Y
https://ibb.co/RSXDrrz
https://ibb.co/34zSNMf

 

Onto the next step.

TeknoParrot still shows the Window$ mouse cursor ?

You can use GameLoader All RH (0.3.2.7) in conjunction with TeknoParrot (1.92) to suppress the Window$ mouse cursor.

"Update rate mouse cursor hide", enable and set to 0.

https://ibb.co/BjNLTxJ
https://ibb.co/dGnHxKH

 


Onto the next step.

 

This step is probably optional !


Demulshooter 8.5.2 can be found here.


http://forum.arcadecontrols.com/index.php/topic,149714.msg1674095.html#msg1674095

 

Here is the DemulShooter Wiki.
https://github.com/argonlefou/DemulShooter/wiki

 

I extracted the DemulShooter files in HOD4/disk0/elf

 

Launch Ds_Diag.exe and change, select a device at the top, it should be your Xbox 360 controller.

Move your mouse it should change the raw input values, test your mouse buttons.

In DemulShooter choose your P1 Device, it should be your Xbox 360 controller.

5c461ae813184-HOD4-Ds-Diag-jpg-58b0a45c0

5c461ae70b595-HOD4-Demul-Shooter-Setting

On to the next steps.


7. Launch HOTD4_MouseFix.exe as administrator.

 

8. Launch Game Loader All RH.exe as administrator.


Wait a few moments, you get a black screen, with green v0.3.2.4 at the bottom.

 

Patients ......

 

Right mouse click is start or 1 on keyboard ?

 

Enjoy !!

 

 

I hope that this tutorial helps other people out.

It takes you a few moments to read, but it took me all night to figure it out.

When you get the game working, thanks to this "manual", please give a thanks at this post.

:very-good:

 

Modifié par linglang
proof read, added info, added link demulshooter.
  • Thanks 1

Partager ce message


Lien à poster
Partager sur d’autres sites

Créer un compte ou se connecter pour commenter

Vous devez être membre afin de pouvoir déposer un commentaire

Créer un compte

Créez un compte sur notre communauté. C’est facile !

Créer un nouveau compte

Se connecter

Vous avez déjà un compte ? Connectez-vous ici.

Connectez-vous maintenant

×