Jump to content

[Tuto] Shining force Cross Raid: How to Install


linglang
 Share

Recommended Posts

Shining force Cross Raid. (RingEdge)

Works fine on Window$ 10 (1809) and TeknoParrot 1.90, with shader.farc applied.

Works fine out of the box, as long as you apply the shader.farc files, otherwise you get black graphics glitches.

 

- Works only on NVIDIA (due to shaders)

SFCR.png

iccard.bin, iccard.txt

 

Both files in the root of c:?

 

I just figured out, that Shining Force Cross Elysion uses the same files, and overwrites them, corrupting the card for Shining force Cross Raid

 

Once you've created a card, you can not create a second one, use the original iccard.bin, iccard.txt files to create a new card.

 

So when you want to load a card from one or other game, save the files found in the root of c:

 

in a separate folder, and place the necessary files in the root of c: when needed for one or the other game.

 

This game uses your mouse or a touchscreen.

 

Configured the game for Directinput?

 

Configure it for keyboard use.

 

https://ibb.co/VTtx0HZ

 

Somehow, in the TeknoParrot settings up, down, left, right are 90 degrees rotated so when you press up you go right.

 

Also in the beginning of the game the characters run to the left, wait a few moments, the first question you get is if you want a "training".

 

Press the buttons configured for up, down, left, right.

 

Use only digital inputs , as far as I know, both  analogue and digital controls configured "bites".

 

Quote:

  • Touch screen works, just use mouse or if you have touch screen, use that.

  • Multiplayer links but no modes are unlocked, feel free to hax!

  • If you use Digital movement, please LEAVE ANALOG UNBINDED!

  • Same thing other way around, or controls don't work.

 

Copy the shader.farc files and replace file inside "rom" folder.

 

Shining Force Cross Raid Patch & Correct iccard.bin, iccard.txt files.

http://www.emuline.org/applications/core/interface/file/attachment.php?id=3985

Shining Force Cross Raid Patch

https://cdn.discordapp.com/attachments/539568423999504384/539765399433248768/shader.farc

 

IC Card Setup
Download these files (
iccard.bin, iccard.txt) and place in C: root.

Currently you cannot change or name your character.

 

On to the game .......

 

Executable files is, project_f-ringedge-release.exe

 

At the Sega screen press F2 to insert a card!

:ptdr:

 

https://ibb.co/fvK8w6N

Press IC Setup multiple times

https://ibb.co/p3gLLVs 
https://ibb.co/TYsMV83 
https://ibb.co/q0bZk29 
https://ibb.co/NT8Z5Bs 
https://ibb.co/6RkxwsP

 

You have created a IC card, it takes you back to the SEGA screen, press F2 again to load the just created card.

 

Enjoy !

 

I hope that this tutorial helps other people out.

It takes you a few moments to read, but it took me all night to figure it out.

When you get the game working, thanks to this "manual", please give a thanks at this post.

:very-good:

 

And a BIG thanks for the people who originally uploaded the games, we all can enjoy (if you do it right) !!!

And of course all the people involved in, the game loaders and JVS I/O emulation applications we use, and all the people I "forgot".

 

Also look at the posts below, some members / people add helpful information, thank them also .....

Edited by linglang
title
Link to comment
Share on other sites

 
 

Thank you. Another method that saves me being able to use the game.

Are you going to do a tutorial for Daitona 3 ?. I have tried many things including edit several .Ini but always start the game puts "network discovery, please wait" for a few seconds and then closes

Link to comment
Share on other sites

 
  • 2 months later...
On 23.02.2019 at 11:03 PM, linglang said:

Shining force Cross Raid. (RingEdge)

Works fine on Window$ 10 (1809) and TeknoParrot 1.90, with shader.farc applied.

Works fine out of the box, as long as you apply the shader.farc files, otherwise you get black graphics glitches.

 


- Works only on NVIDIA (due to shaders)

SFCR.png

iccard.bin, iccard.txt

 

Both files in the root of c:?

 

I just figured out, that Shining Force Cross Elysion uses the same files, and overwrites them, corrupting the card for Shining force Cross Raid

 

Once you've created a card, you can not create a second one, use the original iccard.bin, iccard.txt files to create a new card.

 

So when you want to load a card from one or other game, save the files found in the root of c:

 

in a separate folder, and place the necessary files in the root of c: when needed for one or the other game.

 

This game uses your mouse or a touchscreen.

 

Configured the game for Directinput?

 

Configure it for keyboard use.

 

https://ibb.co/VTtx0HZ

 

Somehow, in the TeknoParrot settings up, down, left, right are 90 degrees rotated so when you press up you go right.

 

Also in the beginning of the game the characters run to the left, wait a few moments, the first question you get is if you want a "training".

 

Press the buttons configured for up, down, left, right.

 

Use only digital inputs , as far as I know, both  analogue and digital controls configured "bites".

 

Quote:

  • Touch screen works, just use mouse or if you have touch screen, use that.

  • Multiplayer links but no modes are unlocked, feel free to hax!

  • If you use Digital movement, please LEAVE ANALOG UNBINDED!

  • Same thing other way around, or controls don't work.

 

Copy the shader.farc files and replace file inside "rom" folder.

 

Shining Force Cross Raid Patch & Correct iccard.bin, iccard.txt files.

http://www.emuline.org/applications/core/interface/file/attachment.php?id=3985

Shining Force Cross Raid Patch

https://cdn.discordapp.com/attachments/539568423999504384/539765399433248768/shader.farc

 

IC Card Setup
Download these files (
iccard.bin, iccard.txt) and place in C: root.

Currently you cannot change or name your character.

 

On to the game .......

 

Executable files is, project_f-ringedge-release.exe

 

At the Sega screen press F2 to insert a card!

:ptdr:

 

https://ibb.co/fvK8w6N

Press IC Setup multiple times

https://ibb.co/p3gLLVs 
https://ibb.co/TYsMV83 
https://ibb.co/q0bZk29 
https://ibb.co/NT8Z5Bs 
https://ibb.co/6RkxwsP

 

Enjoy !

 

I hope that this tutorial helps other people out.

It takes you a few moments to read, but it took me all night to figure it out.

When you get the game working, thanks to this "manual", please give a thanks at this post.

:very-good:

 

And a BIG thanks for the people who originally uploaded the games, we all can enjoy (if you do it right) !!!

And of course all the people involved in, the game loaders and JVS I/O emulation applications we use, and all the people I "forgot".

 

Also look at the posts below, some members / people add helpful information, thank them also .....

Thank you for the tutorial, i do not charge a card like you in the picture I press f2 probably for not seeing the card: P Where to put these cards because I do not have such a root folder and therefore I can not go further in the menu :(
Any fix for full screen ?

Edited by kris85
Link to comment
Share on other sites

 

@kris85

 

You do have a root folder, anyone does.

 

C:\ is the root of your hard disk drive.

So you place the iccard.bin file at c:\iccard.bin

Also iccard.txt ?

It contains only this line 12345678901234567890

 

Remember both games use the same iccard.bin file to save !

So not to corrupt it, use two separate files !

So you have to make two separate files, one for each game from a fresh iccard.bin

I made a folder in C:\ containing the (renamed).bin files. (Elysion.bin and Raid.bin) so I know which one is which.

One for each game, made from a fresh iccard.bin

One .bin which I place in C:\ when needed for a game, it needs to have the name iccard.bin to work.

Also place a unused iccard.bin file in the folder, should you need to make a new card.

Link to comment
Share on other sites

 
35 minutes ago, linglang said:

@kris85

 

You do have a root folder, anyone does.

 

C:\ is the root of your hard disk drive.

So you place the iccard.bin file at c:\iccard.bin

Also iccard.txt ?

It contains only this line 12345678901234567890

 

Remember both games use the same iccard.bin file to save !

So not to corrupt it, use two separate files !

So you have to make two separate files, one for each game from a fresh iccard.bin

I made a folder in C:\ containing the (renamed).bin files. (Elysion.bin and Raid.bin) so I know which one is which.

One for each game, made from a fresh iccard.bin

One .bin which I place in C:\ when needed for a game, it needs to have the name iccard.bin to work.

Also place a unused iccard.bin file in the folder, should you need to make a new card.

Thanks for the answer, I am closer now than farther, now I fight what I am doing, not so that I can not see the card like on 3 ss : P

Link to comment
Share on other sites

 
6 hours ago, linglang said:

@kris85

 

You do have a root folder, anyone does.

 

C:\ is the root of your hard disk drive.

So you place the iccard.bin file at c:\iccard.bin

Also iccard.txt ?

It contains only this line 12345678901234567890

 

Remember both games use the same iccard.bin file to save !

So not to corrupt it, use two separate files !

So you have to make two separate files, one for each game from a fresh iccard.bin

I made a folder in C:\ containing the (renamed).bin files. (Elysion.bin and Raid.bin) so I know which one is which.

One for each game, made from a fresh iccard.bin

One .bin which I place in C:\ when needed for a game, it needs to have the name iccard.bin to work.

Also place a unused iccard.bin file in the folder, should you need to make a new card.

I was just wondering if anyone would be able to create a bat file which could tell each separate game on launch which bin to pick for which game

Link to comment
Share on other sites

 
  • 6 months later...

Shader fixes for Shining Force Cross

Raid, Elysion, Exlesia

https://gofile.io/?c=wxVXqh

 

I run the game with Gameloader All RH 347 and teknoparrot 281

 

Shining Force Cards.rar

http://www.emuline.org/applications/core/interface/file/attachment.php?id=7942

Here is all you need.

A clean card to create your own.

And prepared cards for both games.

Just created not played at all.

Extract what you need to the root of C:

Remember ....

 

  On 2/23/2019 at 11:06 PM, linglang said:

I just figured out, that Shining Force Cross Elysion uses the same files, and overwrites them, corrupting the card for Shining force Cross Raid

 

Once you've created a card, you can not create a second one, use the original iccard.bin, iccard.txt files to create a new card.

 

So when you want to load a card from one or other game, save the files found in the root of c:

 

in a separate folder, and place the necessary files in the root of c: when needed for one or the other game.

 

F2 to load the created game card.

Or to create a new card with the clean card file.

 

The mouse cursor can be very far off when running the game at any other than the original resolution of 1280x720

Press around the character then you can see how far off the mouse click is detected.

I have no solution for that.

The mouse is completly out of wack even after a calibration in the test menu.

In the test menu the x Y position detection is correct but (in game) the mouse is still out of wack.

Edited by Onkel
Link to comment
Share on other sites

 
  • 3 months later...
 
  • 4 months later...

Hi,

 

Did anyone ever figure out how to get both Shining Force games to work without having to change out the icard files on the root of C every time?

I was wondering if creating a hard symbolic link would work. Like putting one set (iccard.bin, iccard.txt) on the root of the D drive and then creating a hard link to fool it into thinking it's on the root of the C drive. Any thoughts on whether this might work, or would it always reference the one on the real C drive first?

 

Edited by buck116
Link to comment
Share on other sites

 
  • 1 month later...
 
  • 8 months later...
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...