Jump to content
linglang

[Tuto] Wangan Midnight Maximum Tune 5, Including Versus play (LAN) setup, Extra car livery.

Recommended Posts

Wangan Midnight Maximum Tune 5 (2014 update 5)

 'Wangan', literally bayshore in Japanese.

wangan_midnight_maximum_tune_5.png

Works fine with TeknoParrot version 1.0.0.201

 

Executable files is, wmn5r.exe

 

First,I'll write up the procedure for setting up a VS play network config. (before I forget)

 

Here we go !

 

First make note / pictures of the original settings in the service menu before you change them !

 

Wangan Midnight Maximum Tune 5, does NOT like to work stand alone, when configured for LAN VS play !

(At least the as slave configured cabin(s))

 

You are going to configure the settings for Versus play on two PC's.

The game will probably not work standalone with these network VS settings.

 

Second I recommend to use static IP addresses on your network cards.

https://kb.netgear.com/27476/How-to-set-a-static-IP-address-in-Windows

 

Use extra network cards and a crossover cable for a direct connection, if needed.

 

Let us setup Cabin1 (left)

In TeknoParrot Game specific settings.

Set the game .exe location (wmn5r.exe)

Next check these boxes:

General - Freeplay. (if needed)

General - Terminal Emulator.

Terminal Emu Config - 2P Event mode.

General - White screen fix. (if needed)

Set your General Network Adapter IP to  the setting of your network card.

 

Windows key+ R

cmd

ipconfig /all

 

Set your Input mapping, also for test mode.

At least test, service, enter switch and D-pad directions for the moment

I used the D-pad, LB, RB, and right stick press for the moment.

 

Now the fun begins, I can not read Japanese, my neighbour can, but I still have not asked him about translating.

 

I'll try to make it clear, here we go.

 

Go into Test mode, by joystick button press when the game boots.

Go to the second line, enter. (joystick right stick press)

Go to the top line, where it says 1, or at least set it to 1 !

The two IC lines should be left off.

The line below that something to do with force  feedback ?

Set the top line to 1 ?

Go to the two character line and press enter to exit this config.

 

Go to  the ninth line, press enter.

You should see a screen with IP adresses.

Go one line above (only choice) and refresh the IP adresses.

Go to the two character line and press enter to exit this config.

I have no idea what the settings are on the two line page, I did not use it in this configuration.

Go to the two character line and press enter to exit this config. 

You should be back at the Test menu start screen.

Press the test button to exit the test menu.

The game should restart.

Stop it for the moment and configurate the joystick / steering wheel as needed in Teknoparrot.

 

Now the settings for the second cabinet (right).

 

Let us set the TeknoParrot settings for Cabin 2 (right)

In TeknoParrot Game specific settings.

Set the game .exe location (wmn5r.exe)

Next check these boxes:

General - Freeplay. (if needed)

Terminal Emu Config - 2P Event mode.

General - White screen fix. (if needed)

Set your General Network Adapter IP to the setting of your network card.

 

Windows+R

cmd

ipconfig /all

 

Go into Test mode, by button press when the game boots.

Go to the second line, enter. (right stick press)

Go to the top line, where it says 1 and set it to 2 !

The two IC lines should be left off.

The line below that something to do with force  feedback ?

Set the top line to 2 ?

Go to the two character line and press enter to exit this config.

 

Go to  the ninth line, press enter.

You should see a screen with IP adresses.

Go one line above (only choice) and refresh the IP adresses.

Go to the two character line and press enter to exit this config.

I have no idea what the settings are on the two line page, I did not use it in this configuration.

Go to the two character line and press enter to exit this config. 

You should be back at the Test menu start screen.

Press the test button to exit the test menu.

The game should restart.

Stop it for the moment and configurate the joystick / steering wheel as needed in Teknoparrot.

 

Start both games on both PC's.

 

Press gas to start the game.

 

Enjoy .....

 

I hope that this tutorial helps other people out.

It takes you a few moments to read, but it took me all night to figure it out.

When you get the game working, thanks to this "manual", please give a thanks at this post.

:very-good:

 

And a BIG thanks for the people who originally uploaded the games, we all can enjoy (if you do it right) !!!

And of course all the people involved in, the game loaders and JVS I/O emulation applications we use, and all the people I "forgot".

 

Also look at the posts below, some members / people add helpful information, thank them also .....

 

Fixes by @Nezarn

https://github.com/Nezarn/WMMT5ResPatcher/releases

 

All 26 Episodes.

Japanese audio, English subtitles.

So you "understand the story and characters better".

 

Partial English translation pack by TatooHanz.

http://www.emuline.org/applications/core/interface/file/attachment.php?id=3624

Partial French translation by Bruce and Nuclaireland

http://www.emuline.org/applications/core/interface/file/attachment.php?id=3709

 

 

 

p.s. 

It works fine for me except the red and yellow message,

about not being able to use the passport at the moment. 

When I know of a solution for that, I will update here.

 

 

Edited by linglang
added car livery and partial translation packs. Added complete anime series.

Share this post


Link to post
Share on other sites

Is there a way to play this offline?

 

Every time I start it without connection I get a warning msg and it doesn't go in game.

 

Any workaround for this?

 

Thanks

 

------------------------------

 

SOLVED

Edited by nohero

Share this post


Link to post
Share on other sites
On 11/26/2019 at 5:13 PM, petje said:

I found this on the internet

People who play WMMT5 at a higher resolution than 1360x768 will see this

https://imgshare.io/image/wmmt5.hiEHc

 

thanks for posting up the fix for midnight maximum tune 5 - but is it possible to fix the demo screen video without that program you provided.

Sadly it is only Trial and last for 30 days.  Anyway to fix the Demo screen videos without the program or another solution for it.

 

Thanks!

Share this post


Link to post
Share on other sites
il y a 55 minutes, talnova a dit :

thanks for posting up the fix for midnight maximum tune 5 - but is it possible to fix the demo screen video without that program you provided.

Sadly it is only Trial and last for 30 days.  Anyway to fix the Demo screen videos without the program or another solution for it.

 

Thanks!

Il existe un lien avec toutes les vidéos en 1080p je ne sais pas si j'ai encore le  lien ou l'archive des vidéos je dois rechercher ça mais ça existe

Share this post


Link to post
Share on other sites
On 7/30/2020 at 7:58 PM, soso92 said:

There is a link with all the videos in 1080p I don't know if I still have the link or the archive of the videos I have to search this but it exists

Awesome let me know if you find it!  didn't know you needed to have that -  still looking for it.  :very-good:

Share this post


Link to post
Share on other sites
Le 01/08/2020 à 09:08, talnova a dit :

Génial, faites-moi savoir si vous le trouvez! Je ne savais pas que vous aviez besoin de cela - toujours à la recherche.  :very-good:

I find it enjoy all movies in 1080p

https://mega.nz/file/RFpSnAwK#0rgvt1bmYeKqaCUQ6fqJaOfrJ4SdY45VArX3vslSexw

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×