Jump to content
Athlonazu385

[Arcade PC] Fast & Furious SuperCars (Raw Thrills)

Recommended Posts

8 hours ago, LEGEND80 said:

@Athlonazu385 I'm referring to this ^

 

What you're saying just doesn't make sense in the context of the HD sdaemon provided there. I think we're talking about two different things.... You stated Raw Thrills supports 2 resolutions...but then I have to set to a 3rd resolution?? in my display properties? and then that'll allow the launcher? to start without patches? What patches? Which launcher - there's two (FNFSC_LAUNCHER_v5 & MohkerzLoaderz.exe) .

 

Forgetting the resolution stuff, the FNFSC launcher works fine, but Mohkerz crashes before gameplay no matter what FYI.

 

I'm just trying to figure out how to set the resolution (specifically -res19) using the patched sdaemon above, on the FNFSC launcher (to have proper controls), with the switches below:

 

From README:

 

The following resolutions can be obtained by using command line arguments.
There is a problem, please ignore.
Thanks to MOHKERS

 

No arguments = 1366x768
-res5760 = 3840x2160
-res4800 = 3440x1440
-res19   = 1920x1080
-res16   = 1600x900
-res10   = 3200x1800
-res8    = 2560x1440
-res6    = 2560x1080
-res5    = 1280x960

Ohh i forgot about the -res switches they should work fine. Now i know what you mean now well sorry about that i was just giving some ideas to some people. It's not like its going to hurt just trying it out anyways. Now i look bad :( I tried to help but i know mohkerz got everything under control so far! The resolution i set mine to was 1600x900 which worked fine using the FNFSC Launcher because I've tried the original resolution but the only problem is the game looks too big also it also doesn't help when your running dual monitors like my setup is using so again sorry for most of the stuff that made no sense!

Share this post


Link to post
Share on other sites

To use on multi monitor setup with launcher, set your désires first monitor res in dxwnd.dxw file and then close and make it read only in Windows paramètres. Then run launcher. 

  • Thanks 1

Share this post


Link to post
Share on other sites
il y a une heure, lokofer a dit :

x360ce DOES not work :( for this game :(

 I tried with og xbox controller, 360 controller, ps3 pad through betterds3 and even keyboard with a ahk remap or x360kb..... 

Edited by Mohkerz

Share this post


Link to post
Share on other sites
1 hour ago, lokofer said:

x360ce DOES not work :( for this game :(

 

It works. Put the 32 bit xinput9_1_0.dll in the same folder as MohkerzLoaderz.exe

  • Like 1

Share this post


Link to post
Share on other sites

Yeah x360kb works without any ahk... Thanks again ducon for that tool ! 

Edited by Mohkerz

Share this post


Link to post
Share on other sites

oh you were right :D i didn't know what i was doing wrong :) sorry for the inconvinience :) is there a method to save your improvements in your car ?

Share this post


Link to post
Share on other sites

Anything that I can do to help with the progress of Analog steering wheel guys playing in Arcade cabinets?

Share this post


Link to post
Share on other sites

Some of the graphics are broken using MohkerzLoader.exe, but work fine using FNFSC_LAUNCHER_v5.exe

Infact the whole game works fine using FNFSC_LAUNCHER_v5.exe, how would I use the -res launch parameters this way? I'd like to play in 1080p.

Share this post


Link to post
Share on other sites
2 hours ago, ducon2016 said:

 

It works. Put the 32 bit xinput9_1_0.dll in the same folder as MohkerzLoaderz.exe

thanks... after 32 bit it works :very-good:

Share this post


Link to post
Share on other sites

is there possible to enter server setting for turn off free play?

  • Thanks 1

Share this post


Link to post
Share on other sites
1 hour ago, camranbant said:

Some of the graphics are broken using MohkerzLoader.exe, but work fine using FNFSC_LAUNCHER_v5.exe

Infact the whole game works fine using FNFSC_LAUNCHER_v5.exe, how would I use the -res launch parameters this way? I'd like to play in 1080p.

+1 Looking to do the same thing!

Share this post


Link to post
Share on other sites
1 hour ago, camranbant said:

Some of the graphics are broken using MohkerzLoader.exe, but work fine using FNFSC_LAUNCHER_v5.exe

Infact the whole game works fine using FNFSC_LAUNCHER_v5.exe, how would I use the -res launch parameters this way? I'd like to play in 1080p.

Probably because he has fixed the issues with dxwnd that would explain it. Simple but very effective.

Share this post


Link to post
Share on other sites
Il y a 1 heure, spiderzsoft a dit :

is there possible to enter server setting for turn off free play?

Dont ask, we will not help to enable coins... 

Edited by Mohkerz
  • Like 1

Share this post


Link to post
Share on other sites

I got the Drift's x360kb file working in SuperCars but it's still totally messed up so the only functions that work are the following:

Enter, Shift, and NumPad Enter Key: Start

Arrow Keys: Working like normal in the menus and in the race

The car will accelerate by itself but you still would have to turn the car with the arrow keys plus it's slower than normal acceleration

N Key, Enter: Nitro

 

But other than that it's still broken meaning most of the controls used in drift like c key for insert credits and Shift+Tab to enter service menu will not work but heck it was worth a try

 

I do believe you can remap the keys in the cfg file but i can be wrong but so far that's the only options that will work with the keyboard

Only works running the FNFSC_LAUNCHER_V5.exe

Share this post


Link to post
Share on other sites
Il y a 4 heures, Athlonazu385 a dit :

I got the Drift's x360kb file working in SuperCars but it's still totally messed up so the only functions that work are the following:

Enter, Shift, and NumPad Enter Key: Start

Arrow Keys: Working like normal in the menus and in the race

The car will accelerate by itself but you still would have to turn the car with the arrow keys plus it's slower than normal acceleration

N Key, Enter: Nitro

 

But other than that it's still broken meaning most of the controls used in drift like c key for insert credits and Shift+Tab to enter service menu will not work but heck it was worth a try

 

I do believe you can remap the keys in the cfg file but i can be wrong but so far that's the only options that will work with the keyboard

Only works running the FNFSC_LAUNCHER_V5.exe

Stop saying nonsense and stop crying about coins, what for ? Please... 

Share this post


Link to post
Share on other sites
1 hour ago, Mohkerz said:

Stop saying nonsense and stop crying about coins, what for ? Please... 

Well okay then I'll shut the hell up forget all this shit i talked about okay you win it's over my nonsense stops now i just tried to be useful but it doesn't work with you all so fine i won't even say anything! Jeez

Share this post


Link to post
Share on other sites

Just to be clear without being harsh.... 

Lot of work and time in this, lot more to do elsewhere. 

Game is tested and perfectly playable for lot of people with a x360 pad.... 

I will try to answer request as possible and if not, stay quiet and let community find solutions. No offense, no drama. 

Better ask for source and show your skills. 

MohkerzLoaderz sources are public, latest version will be uploaded very soon... ahk scripts and exe are no secrets too... 

 

Thats all folks ! 

  • Like 3

Share this post


Link to post
Share on other sites
On 3/13/2019 at 5:28 PM, Athlonazu385 said:

It extracts all the files in one folder unless your antivirus is deleting some certain files even if it doesn't show that the file has been moved to a virus chest you should go check your settings

I got it figured out. Apparently it was just a corrupted download. After inserting some files from the install disc back into the extracted folder I ran sdaemon.exe and it kept coming up with bad CRC check failed messages and game wouldn't start past the pre-load  screen . So I tried extracting in WinRar again and kept getting checksum failed messages. Then i scrapped that download and started with a fresh download. And 

Hidden Content

    Give reaction or reply to this topic to see the hidden content.
 it finally ran with no issues after that. Thanks for chiming in to help!

Share this post


Link to post
Share on other sites

simulation d'insert coin, lisez le readme

Hidden Content

    Give reaction or reply to this topic to see the hidden content.

  • Thanks 2

Share this post


Link to post
Share on other sites
1 hour ago, spindizzi said:

simulation d'insert coin, lisez le readme

Hidden Content

    Give reaction or reply to this topic to see the hidden content.

you are awesome 

its working Thanks :very-good:

Untitled.png

Edited by spiderzsoft

Share this post


Link to post
Share on other sites
10 hours ago, Ratface said:

I got it figured out. Apparently it was just a corrupted download. After inserting some files from the install disc back into the extracted folder I ran sdaemon.exe and it kept coming up with bad CRC check failed messages and game wouldn't start past the pre-load  screen . So I tried extracting in WinRar again and kept getting checksum failed messages. Then i scrapped that download and started with a fresh download. And 

Hidden Content

    Give reaction or reply to this topic to see the hidden content.
 it finally ran with no issues after that. Thanks for chiming in to help!

Np

Share this post


Link to post
Share on other sites

I can't make it work on my W10 x64 1809.

Game start but black screen instead of intro and gameplay.

But work good on Vmware with W7 x64 (3gb vram/8Gb ram).

Share this post


Link to post
Share on other sites
2 hours ago, Backgamon said:

I can't make it work on my W10 x64 1809.

Game start but black screen instead of intro and gameplay.

But work good on Vmware with W7 x64 (3gb vram/8Gb ram).

Works for me on Windows 10  Pro v10.0.17763 Build 17763. Try updating your graphics card driver if you can, and  I also had to install Net Framework from versions 1.1 all the way to 4.72 and also all the versions of the Microsoft 

Hidden Content

    Give reaction or reply to this topic to see the hidden content.
packages.

Share this post


Link to post
Share on other sites

I want to thank very much (Mohkerz)
Really invaluable work, the game works great
Pouzivam (360ce) and with steering wheel works perfect
Thanks for the great game (Mohkerz):very-good:

Share this post


Link to post
Share on other sites

How configure and play this game with wheel G29 ???

Share this post


Link to post
Share on other sites
4 hours ago, sonic323 said:

I want to thank very much (Mohkerz)
Really invaluable work, the game works great
Pouzivam (360ce) and with steering wheel works perfect
Thanks for the great game (Mohkerz):very-good:

yes would like to know if this can be played with a steering wheel g27 in my case or g29 other users

somebody that can clarify if it wrks with not just a x360 controller

Share this post


Link to post
Share on other sites

I have
(Logitech MOMO Racing Force Feedback Wheel)

Software x360ce (32bit)

Everything works

Share this post


Link to post
Share on other sites

Yeah wheels working too... Depends on wheel and skills to deal with dinput and xinput. 

You can even play this with a guitar controller or a wiimote.... 

Share this post


Link to post
Share on other sites

I can confirm that this works perfect on Windows 10 with the latest update and GPU drivers.


RUN FNFSC_LAUNCHER_v5.exe to play.

Plug in XBOX 360 Controller.

Left thumb stick for directions & Right top trigger for gas and Start button for boost. ESC to exit.

 

A big thank you to Mohkerz for contributing to the Arcade emulation scene. Your handwork is much appreciated. 

Share this post


Link to post
Share on other sites
Il y a 7 heures, sonic323 a dit :

J'ai
(roue de réaction Logitech MOMO Racing Force)

Logiciel x360ce (32bit)

Tout fonctionne

it would be necessary to find the means in the test mode to be able to activate the mode DInput because currently by default the game is in XInput

it work because you use x360ce but without this your wheel not working

Edited by soso92

Share this post


Link to post
Share on other sites
Il y a 21 heures, Ratface a dit :

Works for me on Windows 10  Pro v10.0.17763 Build 17763. Try updating your graphics card driver if you can, and  I also had to install Net Framework from versions 1.1 all the way to 4.72 and also all the versions of the Microsoft 

Hidden Content

    Give reaction or reply to this topic to see the hidden content.
packages.

I updated driver and checked the framwork...and as before, missing 3D at start, black screen during intro and gameplay...menus work otherwise.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×