Jump to content

[Arcade PC] Need for Speed Carbon (Global VR)


spiderzsoft
 Share

Recommended Posts

 
  • Replies 85
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

 
26 minutes ago, torostanco said:

grazie spiderzsoft un bel gioco 

funziona tramite il launcher basta mettere la spunta su ovveride car e poi star game perfetto grazie

 

sì caro funziona tramite il launcher e anche il comando CMD per l'esecuzione .... molto presto il frontend sarà lì :very-good:   in questo momento non ho il permesso per il caricamento :ennuyeux:

 

 

Edited by spiderzsoft
Link to comment
Share on other sites

 

Game works perfectly! Awesome!

 

Now we just need NFS Underground and GT working! Was there more than 3 NFS arcade cabs?

 

Here's my button list so far. Please add onto it. There's things like View and Exiting game I haven't found.

 

keyboard u/d/l/r = steering/gas/brake

r = reset car

t = change song

Right Shift = N2o

Alt-F4 = quit

Edited by LEGEND80
Link to comment
Share on other sites

 
8 hours ago, LEGEND80 said:

Game works perfectly! Awesome!

 

Now we just need NFS Underground and GT working! Was there more than 3 NFS arcade cabs?

 

Here's my button list so far. Please add onto it. There's things like View and Exiting game I haven't found.

 

keyboard u/d/l/r = steering/gas/brake

r = reset car

t = change song

Right Shift = N2o

Alt-F4 = quit

C= Change the camera

L= Reverse the camera

A= Steering

Z= Brake

R=Reset Car

After the race is over, the game closes.

Edited by xtremebuga
Link to comment
Share on other sites

 

I was able to make the roam mode work by just creating a bat file with the parameters:

 

Start CarbonRelease.exe -race ce.17.1  -width 1366 -height 768 -numai 4 -playernumber 1 -playercount 2 -windowed - trans 1

 

If you change race ce.17.1 para-race ce.15.1, go back to normal.
I do not understand much of the subject, but for those who want to try to create a loader for this game stay the tip.

 

Sem_t%C3%ADtulo.png?1542298017

Sem_t%C3%ADtulo1.png?1542298441

Sem_t%C3%ADtulo2.png?1542298469

Sem_t%C3%ADtulo3.png?1542298492

Sem_t%C3%ADtulo4.png?1542298522

Another detail, I could not configure the button to change Shift gear.

 

Edited by xtremebuga
Link to comment
Share on other sites

 
3 hours ago, xtremebuga said:

I was able to make the roam mode work by just creating a bat file with the parameters:

 

Start CarbonRelease.exe -race ce.17.1  -width 1366 -height 768 -numai 4 -playernumber 1 -playercount 2 -windowed - trans 1

 

If you change race ce.17.1 para-race ce.15.1, go back to normal.
I do not understand much of the subject, but for those who want to try to create a loader for this game stay the tip.

Another detail, I could not configure the button to change Shift gear.

 

that is very useful for making own loaders. also same method we use in Underground & GT version :very-good:

Edited by spiderzsoft
Link to comment
Share on other sites

 
 
 
 
 
23 hours ago, fire10 said:

Id love for someone to make an easy to follow guide for Need for Speed Underground, Ive heard its fully working now is that right?

Great work on these and thanks loads for the uploads and sharing

 

kinda wish there was an video installation 

Link to comment
Share on other sites

 
 
 

Thanks darksabre9 just found the video. I wonder if there is now a way to use an installed copy rather than having to instal via install disks, have you heard any news of this. Also cannot seem to find the install disks. Do you have it working, could you upload the install mate

 

Edit: just seen xtremebugas post ill wait and see what happens then now, thanks buddy. Hopefully these will get the same work that the fast and furious games did thanks to ducon and Mohkerz

Edited by fire10
Link to comment
Share on other sites

 
38 minutes ago, xtremebuga said:

Lets waiting what sayd spiderzsoft:

 

frontend is coming soon.... :very-good: don't forget to say Thanks

 

 

at this time frontend not fix on win7, win10, just open in win XP but when ever we select any stage for playing game gonna crashed. my friend working on it. other wise if he will allow me then i will upload backup Disk ISO..

 

Sorry for my bed English hope you guys understand me :gene:

Link to comment
Share on other sites

 
 
3 hours ago, fire10 said:

Thanks darksabre9 just found the video. I wonder if there is now a way to use an installed copy rather than having to instal via install disks, have you heard any news of this. Also cannot seem to find the install disks. Do you have it working, could you upload the install mate

 

Edit: just seen xtremebugas post ill wait and see what happens then now, thanks buddy. Hopefully these will get the same work that the fast and furious games did thanks to ducon and Mohkerz

we hope ducon and Mohkerz or any other expert fixed Super Bike 2 controller very soon

Edited by spiderzsoft
Link to comment
Share on other sites

 

Will the need for speed games ever run exactly like their arcade versions without pc hacks and launchers. It's great but I miss the actual arcade experience,  what is stopping these getting fixed like the fast and furious games guys

Link to comment
Share on other sites

 
  • 1 month later...
 
  • 2 weeks later...
 

All Need For Speed Arcade cabinets have an Immersion Force Feedback PCB that only feeds Wheel input into a USB HID input.

 

The Gas / Brake pedals come in a Nytric USB board that takes in the 2 analog signals and several digital signals.  It also supports digital out (lamp drivers).

 

If you install a Nytric board in a windows PC it will show up as a USB HID Device.

NFS uses this input stream for buttons, Gas Analog, Brake Analog & to turn on lights/card dispensers.

I used USBlyzer and I could read the data stream.

I'm not real familiar with HID or USB data streams but the DATA I saw was...

02 00 01 00 01 00 01
FF FF FF FF 00 00 00
01 28

I don't understand the first line at all but only the first byte would change a little.

The second line first two bytes are the Gas analog input (10 bit?)
The second line third & fourth bytes are the Brake analog input (10 bit?)
The second line fifth Byte is Digital In B

01 = Music Button
02 = Look Back Button
04 = NOS
08 = not used?
10 = View Button
20 = E Brake
40 = Shift Up
80 = Shift Down

The second line 6th Byte is Digital In A

01 = Shift Left? (6 speed shifter cabinet)
02 = Shift Right?  (6 speed shifter cabinet)
04 = Card Dispense?
08 = Card Dispense Error?
10 = Start Button
20 = Operator Button

I did not find the Coin Line 0 or $ Coin Line 1 inputs (will search again).

The Third line both bits flittered about quiet a bit but I couldn't make any sense out of them (data checksum or something?)

I know this USB device is also set up for outputs, there are 4 MOSFETs on the board, probably for the lamp drivers

DOUTPWR0 = Start Lamp
DOUTPWR1 = Lead Lamp
DOUTPWR2 = Brake Lamp

There are also some digital line outs
DOUT0 = Card Dispense
DOUT1 = Hold/Drop Card

I don't know how to use USBlyzer to write to a port, but it would be simple to test these if I could.

From KLOV posting.....

Here is what I have found with USBlyzer:

Connection Status Device connected
Current Configuration 1
Speed Low (1.5 Mbit/s)
Device Address 1
Number Of Open Pipes 1

Device Descriptor USB IO BOARD
Offset Field Size Value Description
0 bLength 1 12h
1 bDescriptorType 1 01h Device
2 bcdUSB 2 0110h USB Spec 1.1
4 bDeviceClass 1 00h Class info in Ifc Descriptors
5 bDeviceSubClass 1 00h
6 bDeviceProtocol 1 00h
7 bMaxPacketSize0 1 08h 8 bytes
8 idVendor 2 0483h SGS Thomson Microelectronics
10 idProduct 2 0003h
12 bcdDevice 2 0401h 4.01
14 iManufacturer 1 03h "NYTRIC INC"
15 iProduct 1 01h "USB IO BOARD"
16 iSerialNumber 1 02h "ST1"
17 bNumConfigurations 1 01h

Configuration Descriptor 1 Bus Powered, 100 mA
Offset Field Size Value Description
0 bLength 1 09h
1 bDescriptorType 1 02h Configuration
2 wTotalLength 2 0022h
4 bNumInterfaces 1 01h
5 bConfigurationValue 1 01h
6 iConfiguration 1 00h
7 bmAttributes 1 80h Bus Powered
4..0: Reserved ...00000
5: Remote Wakeup ..0..... No
6: Self Powered .0...... No, Bus Powered
7: Reserved (set to one)
(bus-powered for 1.0) 1.......
8 bMaxPower 1 32h 100 mA

Interface Descriptor 0/0 HID, 1 Endpoint
Offset Field Size Value Description
0 bLength 1 09h
1 bDescriptorType 1 04h Interface
2 bInterfaceNumber 1 00h
3 bAlternateSetting 1 00h
4 bNumEndpoints 1 01h
5 bInterfaceClass 1 03h HID
6 bInterfaceSubClass 1 00h
7 bInterfaceProtocol 1 00h
8 iInterface 1 00h

HID Descriptor
Offset Field Size Value Description
0 bLength 1 09h
1 bDescriptorType 1 21h HID
2 bcdHID 2 0110h 1.10
4 bCountryCode 1 21h US
5 bNumDescriptors 1 01h
6 bDescriptorType 1 22h Report
7 wDescriptorLength 2 0061h 97 bytes

Endpoint Descriptor 81 1 In, Interrupt, 10 ms
Offset Field Size Value Description
0 bLength 1 07h
1 bDescriptorType 1 05h Endpoint
2 bEndpointAddress 1 81h 1 In
3 bmAttributes 1 03h Interrupt
1..0: Transfer Type ......11 Interrupt
7..2: Reserved 000000..
4 wMaxPacketSize 2 0008h 8 bytes
6 bInterval 1 0Ah 10 ms

Interface 0 HID Report Descriptor
Item Tag (Value) Raw Data
Usage Page (Bar Code Scanner) 05 8C
Usage 09 01
Collection (Application) A1 01
Report ID (1) 85 01
Usage 09 01
Logical Minimum (0) 15 00
Logical Maximum (255) 26 FF 00
Report Size (8) 75 08
Report Count (4) 95 04
Feature (Data,Var,Abs,NWrp,Lin,Pref,NNul,Vol,Bit) B1 82
Report ID (2) 85 02
Usage 09 02
Logical Minimum (0) 15 00
Logical Maximum (255) 26 FF 00
Report Size (8) 75 08
Report Count (1) 95 01
Feature (Data,Var,Abs,NWrp,Lin,Pref,NNul,Vol,Bit) B1 82
Report ID (3) 85 03
Usage 09 03
Logical Minimum (0) 15 00
Logical Maximum (255) 26 FF 00
Report Size (8) 75 08
Report Count (5) 95 05
Feature (Data,Var,Abs,NWrp,Lin,Pref,NNul,Vol,Bit) B1 82
Report ID (4) 85 04
Usage 09 04
Logical Minimum (0) 15 00
Logical Maximum (255) 26 FF 00
Report Size (8) 75 08
Report Count (1) 95 01
Feature (Data,Var,Abs,NWrp,Lin,Pref,NNul,Vol,Bit) B1 82
Report ID (5) 85 05
Usage 09 05
Logical Minimum (0) 15 00
Logical Maximum (255) 26 FF 00
Report Size (8) 75 08
Report Count (4) 95 04
Feature (Data,Var,Abs,NWrp,Lin,Pref,NNul,Vol,Bit) B1 82
Report ID (1) 85 01
Usage 09 01
Logical Minimum (0) 15 00
Logical Maximum (255) 26 FF 00
Report Size (8) 75 08
Report Count (15) 95 0F
Input (Data,Var,Abs,NWrp,Lin,Pref,NNul,Bit) 81 82
End Collection C0

If someone could write a driver that takes these inputs & makes them available for SuperModel/Mame/M2 Emulator that would be awesome!

If I can provide any more support from the hardware end, please let me know.

Link to comment
Share on other sites

 
  • 2 weeks later...
 
On 15/11/2018 at 7:26 PM, spiderzsoft said:

that is very useful for making own loaders. also same method we use in Underground & GT version :very-good:

@spiderzsoft could you give us an example of using own loaders or bats similar to commandline extremebuga showed above for Need For Speed Underground, it would be much appreciated.

Link to comment
Share on other sites

 
 
 
  • 1 month later...
 
  • 3 weeks later...
 
  • 1 month later...
 
 

mega://enc2?   => for file
mega://fenc2?  => for folder

You need Mega Downloader 1.7


http://www.emu-france.com/utilitaires/325-utilitaires-divers/328-internet/7555-megadownloader-portable/

(100% reliable because unpacked)

Checked .exe on www.virustotal.com is OK (false positive for some A/V).  

Tested and approved by 7zxkv, no risk.

 

I use antimicro to assign keyboard inputs to joystick.

https://github.com/AntiMicro/antimicro/releases

Edited by Onkel
Link to comment
Share on other sites

 
  • 2 months later...

has anyone gotten this to work yet mines crashes after i pick my shifting options before the race i'm on win10 1903

nfs carbon crash pic.png

Link to comment
Share on other sites

 
  • 1 month later...
 
  • 3 weeks later...

You can now enable career mode with the attached batch file.

Career Mode Features:
-120 events, including boss battles
-100+ unique preset cars

 

Q:What is career year 1/2?
A:In the arcade version, you can race two careers. The only difference is in the boss fights, where you get a different boss for each career year.

Usage: Extract the CarbonRelease.bat file to where your CarbonRelease.exe file is, choose an event from the excel document, and modify the bat file accordingly, with the help of the provided image.

 

NFS Carbon Arcade Career Mode.zip

Edited by konigsseg
Link to comment
Share on other sites

 
2 hours ago, konigsseg said:

You can now enable career mode with the attached batch file.

Career Mode Features:
-120 events, including boss battles
-100+ unique preset cars

 

Q:What is career year 1/2?
A:In the arcade version, you can race two careers. The only difference is in the boss fights, where you get a different boss for each career year.

Usage: Extract the CarbonRelease.bat file to where your CarbonRelease.exe file is, choose an event from the excel document, and modify the bat file accordingly, with the help of the provided image.

 

NFS Carbon Arcade Career Mode.zip

dude thanks for this im going to be playing around with it, but i hope to see more progress on the frontend when it's done

Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share


×
  • Create New...