Jump to content
ducon2016

Mohkerz Loaderz v0.5.2

Recommended Posts

Just updated new version 0.5 with support for Mario Kart Arcade GP DX 1.0. Do not ask for 1.1, I do not intend on supporting it for a couple of months. I should have released this a long time ago, but was very busy and got injured, so better late than never.

 

The reason why I added support for 1.0 is three fold: TP stopped supporting it in the UI recently and felt it could be useful to have it open sourced (this was before OpenParrot was created), 1.0 and save did not work great in TP before, and I just wanted to show that it is possible to make the game work including save and Banapass with very small and simple code. I know the purists will prefer emulation to patching, but I do not have access to the original hardware or anything that could help me reverse quicker, so patching can still be a decent approach. 20KB without any optimization for size for a loader is not too bad :D

 

I will rewrite my own JVS at some point to streamline inputs, but patching is fun so far :D

 

 

Edited by ducon2016
  • Like 6

Share this post


Link to post
Share on other sites
2 hours ago, angelknight010 said:

A brand new loader:)

Thank you!!!

Is there any different from teknoparrot?

 

Yes, for example for MKDX1.0 the save is offline and located on your computer, not online. It is much smaller and requires less resources sitting at 20KB :D At the same time the loader is very early and small, so it only supports 5 games right now and it is not as configurable for now.

Just try it :D
 

Edited by ducon2016

Share this post


Link to post
Share on other sites

angelknight010

🧨😉TOTALLY AGREE WITH YOU, we need a higher resolution for ABC   after burner climax''   3840x2160  is more to my liking

Share this post


Link to post
Share on other sites

Still with Sega Rally 3 i get the Out of Memory for Tex. when som graphic tries to load. the title screens without 3D works fine. and i can also select track but then i crashes after that.

 

i run on Windows 10 X64

Core I9 X7900 and Titan X.

Once i have been able to play Sega Rally 3 under TeknoParrot, but then after a reboot it stopped working.

Share this post


Link to post
Share on other sites
6 hours ago, Mock said:

Still with Sega Rally 3 i get the Out of Memory for Tex. when som graphic tries to load. the title screens without 3D works fine. and i can also select track but then i crashes after that.

 

i run on Windows 10 X64

Core I9 X7900 and Titan X.

Once i have been able to play Sega Rally 3 under TeknoParrot, but then after a reboot it stopped working.

 

Do you have a log or any screenshot of the error you can share?

Share this post


Link to post
Share on other sites
Le 27/10/2018 à 15:37, Mock a dit :

Still with Sega Rally 3 i get the Out of Memory for Tex. when som graphic tries to load. the title screens without 3D works fine. and i can also select track but then i crashes after that.

 

i run on Windows 10 X64

Core I9 X7900 and Titan X.

Once i have been able to play Sega Rally 3 under TeknoParrot, but then after a reboot it stopped working.

I had the same problem after the windows 10 october update (1809). I have downgrade with 1803 version of windows 10 (april 2018 version) and now sega rally work fine. (windows 10 64bits i3 8go ddr3 ssd) (sorry for my bad english)

Edited by titf650

Share this post


Link to post
Share on other sites
On 28/10/2018 at 3:11 PM, titf650 said:

I had the same problem after the windows 10 october update (1809). I have downgrade with 1803 version of windows 10 (april 2018 version) and now sega rally work fine. (windows 10 64bits i3 8go ddr3 ssd) (sorry for my bad english)

i could fear it had to do with a windows update. since it was working once before. i have the insider updates. and maybe things has changed after they updated dx12 for this raytracing. i did try with a new RTX card but it was same issue

Share this post


Link to post
Share on other sites
il y a une heure, Mock a dit :

i could fear it had to do with a windows update. since it was working once before. i have the insider updates. and maybe things has changed after they updated dx12 for this raytracing. i did try with a new RTX card but it was same issue

 

I try to help you but my english is not very good. My current version is

 

Current build 17134

Current version 6.3

Product name Windows 10 Pro

ReleaseId 1803

 

 

 

Can you compare with your version ?

 

you can find this information in regedit

 

execute windows ->regedit

 

HKEY_Local_Machine-> SOFTWARE->Microsoft-> windows NT->CurrentVersion

 

I launch sega rally with teknoparrot 1.69 (but i think that it's ok with 1.80 version) Can you try with teknoparrot ?

 

 

current_version.jpg

 

When i have the problem, i have reinstall windows 10 with this version 1803 but with conservation personal files. I haven't use the downgrade in windows update option.

 

Edited by titf650

Share this post


Link to post
Share on other sites
On 11/17/2018 at 3:21 AM, titf650 said:

I launch sega rally with teknoparrot 1.69 (but i think that it's ok with 1.80 version) Can you try with teknoparrot ?

 

I recommend you move your question to the TeknoParrot thread. I just tried with Mohkerz Loaderz on latest version of Windows 10 fully upgraded and SR3 works fine.

 

Same values for me

 

Current build 17134

Current version 6.3

Product name Windows 10 Pro

ReleaseId 1803

Edited by ducon2016

Share this post


Link to post
Share on other sites
il y a 43 minutes, ducon2016 a dit :

 

I recommend you move your question to the TeknoParrot thread. I just tried with Mohkerz Loaderz on latest version of Windows 10 fully upgraded and SR3 works fine.

 

Désolé je lui ai proposé ce test pour vérifier que cela ne vient pas de son installation Mohkerz, si cela s'oriente vers teknoparrot je migre sur le thread teknoparrot.

Share this post


Link to post
Share on other sites
9 hours ago, titf650 said:

 

Désolé je lui ai proposé ce test pour vérifier que cela ne vient pas de son installation Mohkerz, si cela s'oriente vers teknoparrot je migre sur le thread teknoparrot.

 

Ah ok pas de probleme.

Share this post


Link to post
Share on other sites

super taff les gars moi je préfere de loin la facilité de ce loader

2 questions:

 

1. est-ce qu'on peut jouer au clavier (exemple: mario 1.0 se lance parfaitement mais aucune touche du clavier fonctionne)

2. A quand une mise à jour supportant plus de jeux, sérieux je kiffe!

 

Joyeux Noel

Share this post


Link to post
Share on other sites
6 hours ago, Darage said:

super taff les gars moi je préfere de loin la facilité de ce loader

2 questions:

 

1. est-ce qu'on peut jouer au clavier (exemple: mario 1.0 se lance parfaitement mais aucune touche du clavier fonctionne)

2. A quand une mise à jour supportant plus de jeux, sérieux je kiffe!

 

Joyeux Noel

 

1. Oui. Utilises ca: http://www.emuline.org/topic/1239-simulate-x360-controllers-when-you-just-have-a-keyboard/

a. Copies xinput9_1_0.dll du repertoire dll (pas x64) et x360kb.ini dans le repertoire de Mohkerz Loaderz.exe

b. Edite x360kb.ini avec les touches que tu veux

 

2. A quand une mise à jour supportant plus de jeux, sérieux je kiffe!

Merci, on rajoute les jeux petit a petit. C'est pas la course. On prefere bien finir les jeux et que tout marche bien, plutot que publier des trucs qui marchent a moitie.

 

Edited by ducon2016
  • Like 2

Share this post


Link to post
Share on other sites

merci beaucoup les copains!

 

Ps: pas de sons sur mariokart vous savez comment résoudre?

Edited by Darage

Share this post


Link to post
Share on other sites
En 28/10/2018 a las 15:11, titf650 dijo:

I had the same problem after the windows 10 october update (1809). I have downgrade with 1803 version of windows 10 (april 2018 version) and now sega rally work fine. (windows 10 64bits i3 8go ddr3 ssd) (sorry for my bad english)

  Merry Christmas dear all!

 

Still having same problem with Sega Rally 3..  Unfortunately, new version 1.81 did not fix it.. :(   Someone knows if Teknogoods is working in that fix?

 

Not all bad news.. Daytona 3 works perfect with this new version! Goog Christmas present for me! 

 

But please, try to fix SR3...!! It was my favourite game! 

Share this post


Link to post
Share on other sites

I'm using a Xbox One controller and I can't change the view in Sega Rally 3. I've tried to remap it to other buttons but it still won't work. Everything else works perfectly.

Any ideas?

Share this post


Link to post
Share on other sites
3 hours ago, sugarhill said:

I'm using a Xbox One controller and I can't change the view in Sega Rally 3. I've tried to remap it to other buttons but it still won't work. Everything else works perfectly.

Any ideas?

 

The X button is the one changing the view when you are racing. Nothing happens when you press it?

Share this post


Link to post
Share on other sites
Il y a 3 heures, ducon2016 a dit :

 

The X button is the one changing the view when you are racing. Nothing happens when you press it?

 

Exactly! I've tried with two different Xbox One controllers and a Switch Pro controller (that one didn't work at all).

 

Also, is there a way to activate the rear view mirror and change the difficulty?

Share this post


Link to post
Share on other sites
19 hours ago, sugarhill said:

 

Exactly! I've tried with two different Xbox One controllers and a Switch Pro controller (that one didn't work at all).

 

Also, is there a way to activate the rear view mirror and change the difficulty?

 

Download x360ce vibmod 3.1.0.3 from

Hidden Content

    Give reaction or reply to this topic to see the hidden content.

then run xinputtest.exe. Does your X button works with the Xbox One Controllers?

 

Mohkerz Loaderz only works with xinput controllers, so it will only work if you have a way to make the Switch Controller run as an xinput device. Again you can test it with the same app xinputtest.exe

Edited by ducon2016
  • Like 1

Share this post


Link to post
Share on other sites
il y a une heure, ducon2016 a dit :

 

Download x360ce vibmod 3.1.0.3 from

Hidden Content

    Give reaction or reply to this topic to see the hidden content.

then run xinputtest.exe. Does your X button works with the Xbox One Controllers?

 

Mohkerz Loaderz only works with xinput controllers, so it will only work if you have a way to make the Switch Controller run as an xinput device. Again you can test it with the same app xinputtest.exe

 

xinputtest.exe acts wierd. In game everything except for the change view button works as it should but xinputtest.exe displays a B press as X and alla the face buttons have switched places, analogue triggers is right stick and so on. The only buttons that actually seem to register right is the left stick, d-pad and R/L shoulder buttons.

But in-game Sega Rally 3 works great except that I can't change the view.

 

I have a Mayflash Ultimate Adapter so I'll try that to emulate a 360 controller. Edit: That didn't work, same problem as before. Everything except for the change view button works flawlessly. Oh, and I just noticed that apparently the change gears buttons doesn't work either (not a problem as I use automatic).

 

Is there a way to map the change view button to a keyboard button through the config file?

Edited by sugarhill

Share this post


Link to post
Share on other sites
1 hour ago, sugarhill said:

 

xinputtest.exe acts wierd. In game everything except for the change view button works as it should but xinputtest.exe displays a B press as X and alla the face buttons have switched places, analogue triggers is right stick and so on. The only buttons that actually seem to register right is the left stick, d-pad and R/L shoulder buttons.

But in-game Sega Rally 3 works great except that I can't change the view.

 

I have a Mayflash Ultimate Adapter so I'll try that to emulate a 360 controller. Edit: That didn't work, same problem as before. Everything except for the change view button works flawlessly. Oh, and I just noticed that apparently the change gears buttons doesn't work either (not a problem as I use automatic).

 

Is there a way to map the change view button to a keyboard button through the config file?

 

If xinputtest does not work it means there is a problem with your pad, nothing I can do. Few options:

 

1. Try to press B in game. Does it change the view?

2. Try remapping buttons with x360ce

3. Use Joy2Key combined with x360kb (simulates xbox controller with a keyboard) basically your joysticks will be transformed in keys through joy2key, and then the keys will be transformed back into xbox controller with x360kb. I do not recommend that option since you lose the analog levels.

Edited by ducon2016

Share this post


Link to post
Share on other sites
Il y a 2 heures, ducon2016 a dit :

 

If xinputtest does not work it means there is a problem with your pad, nothing I can do. Few options:

 

1. Try to press B in game. Does it change the view?

2. Try remapping buttons with x360ce

3. Use Joy2Key combined with x360kb (simulates xbox controller with a keyboard) basically your joysticks will be transformed in keys through joy2key, and then the keys will be transformed back into xbox controller with x360kb. I do not recommend that option since you lose the analog levels.

 

1. B is the handbrake and it works flawlessly.

2. Tried using x360ce. It doesn't do anything it seems, or maybe I'm doing it wrong (tried starting SR3 through x360ce and closing x360ce then starting SR3). The program maps the buttons correctly at least.

3. Just want that option to change the view. Don't really want to lose out on analog gas/break.

 

I've now tried with three different Xbox One controllers and the same result so there's nothing wrong with the pads. I've tried editing the Segarally3.cpp and changed the button for the camera to a button that registers like the hand brake (B) but that doesn't work either, then again I'm not sure that alone would make a difference.

Share this post


Link to post
Share on other sites
33 minutes ago, sugarhill said:

 

1. B is the handbrake and it works flawlessly.

2. Tried using x360ce. It doesn't do anything it seems, or maybe I'm doing it wrong (tried starting SR3 through x360ce and closing x360ce then starting SR3). The program maps the buttons correctly at least.

3. Just want that option to change the view. Don't really want to lose out on analog gas/break.

 

I've now tried with three different Xbox One controllers and the same result so there's nothing wrong with the pads. I've tried editing the Segarally3.cpp and changed the button for the camera to a button that registers like the hand brake (B) but that doesn't work either, then again I'm not sure that alone would make a difference.

 

For x360ce, put their xinput1_4.dll into Mohkerz Loaderz folder.

Share this post


Link to post
Share on other sites
Le 2019-02-11 à 23:01, ducon2016 a dit :

 

For x360ce, put their xinput1_4.dll into Mohkerz Loaderz folder.

Ah, I'll try that. 

Share this post


Link to post
Share on other sites
3 hours ago, sugarhill said:

That didn't do anything, oh well.

 

Come on discord for support. Easier than here.

 

1. Have you configured your buttons with x360ce?

2. Do you hear a "beep" after putting xinput9_1_0.dll in the Mohkerz Loaderz folder? If you do not hear a beep, it means you put the wrong dll. Make sure it is the x360ce xinput9_1_0.dll in 32 bit.

Share this post


Link to post
Share on other sites

@Ducon2016 @Mohkerz

 

Guys, I have a question that's a little off topic but could really use some help. I use Mohkerz loaders for SR3, Mario Kart, FnF Drift, and Ford Racing and all work great! I use Launchbox as my frontend and all of these games launch and play just fine.

 

I've been moving over to Big Box which essentially is an fancier front end to Launchbox (part of Launchbox suite though) and I can only play FnF Drift (Which I downloaded Mohkerz build that used some sort of AHK to load). The others launch and then die. (I know they launch because I hear a beep when 360 loads for directinput keyboard) So I assume it doesn't like the gameloader and wants to see the game.exe running in the background. Any idea how I can solve for this? Mohkerz, what is your AHK script that you built to launch FNF? Would it be universal for the other games?

 

I'm pretty stumped at this point so I greatly appreciate any help you can provide!

Edited by bojo5150

Share this post


Link to post
Share on other sites
il y a 12 minutes, Andrev a dit :

Any chance looking into Storm Racer G?

Give us a dump man!

  • Haha 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×