Jump to content
Houb

RPCS3 : Les "bons" jeux type arcade parfaitement "jouables"

Recommended Posts

hace 20 horas, Houb dijo:

A quite good new PC at this time :

CM (Z370) : 100€

Proc (i5-9600K) : 240€

DDR4 (16GB 2666) : 60€

GC (GTX-1060) : 160€

=> 560€ in France (with a lot of taxes) so approx 560$ in the US I think ;)

Thanks for your reply, but unfortunately this PC you mention costs around US$ 1500 where I live, there are better options for around US$ 1000, like Ryzen 5 2600, Core i5 8400, even Core i7 8700 ( core i7 8700 with GTX 1050 and 8 GB ram costs US$ 1100.) These are generic PCS that are built upon request. 

Edited by customizer2

Share this post


Link to post
Share on other sites

My motherboard only supports the following CPUs: Intel Core 2 Extreme - Core 2 Quad - Core 2 Duo - Pentium Dual Core - Celeron Dual Core - Celeron, Penryn Quad Core Yorkfield - Dual Core Wolfdale - These CPUs have a poor perfomance not enough for RPCS3. So if I have to change the motherboard, it´s better to buy a new PC, I don´t have skills to build one myself.

Edited by customizer2

Share this post


Link to post
Share on other sites

Just to show examples about how powerful the PC should be to run Ridge Racer 7 with RPCS3.

This video shows the game emulated on an Intel Core i5 3570k with GTX 1050 Ti.

As you can see, it runs ingame at average 30 fps with stuttering sound.

 

 

 

And with Ryzen 7 2700 and RTX 2060 GPU, seems better, but doesn´t show the fps in the video:

 

 

 

Edited by customizer2

Share this post


Link to post
Share on other sites

Steep prizes for computer hardware in Uruguay.

Are taxes that high ?

Sorry to hear that you will need a new PC to emulate a PS3, and the emulation is not even bit perfect.

 

Sending a Q8300 CPU to you from Europe would cost about US$ 20, I do not think it is worth the money.

It would be cheaper to order one form China including free shipping !

So that is a no go, sending a CPU which is also to slow to run RCPS3.

 

 

Prices of the previous generation Ryzen has lowered a lot !!

 

And even if you have a fast PC, CPU / GPU, check the RCPS3 compatibilty list

Hidden Content

    Give reaction or reply to this topic to see the hidden content.

As you can see it is still problematic.

Edited by linglang

Share this post


Link to post
Share on other sites
hace 11 horas, linglang dijo:

Steep prizes for computer hardware in Uruguay.

Are taxes that high ?

Sorry to hear that you will need a new PC to emulate a PS3, and the emulation is not even bit perfect.

 

Sending a Q8300 CPU to you from Europe would cost about US$ 20, I do not think it is worth the money.

It would be cheaper to order one form China including free shipping !

So that is a no go, sending a CPU which is also to slow to run RCPS3.

 

 

Prices of the previous generation Ryzen has lowered a lot !!

 

And even if you have a fast PC, CPU / GPU, check the RCPS3 compatibilty list

Hidden Content

    Give reaction or reply to this topic to see the hidden content.

As you can see it is still problematic.

 

Thanks again for your interest. Prices in my country are steep for consoles, not so much for PCs and related hardware, if you compare with USA.

Argentina and Brazil, for example, have high taxes for imported hardware, so it is far more expensive than in Uruguay.

 

Regarding  Q8300 CPU, it is about 40% faster than my CPU, according to the web page 

Hidden Content

    Give reaction or reply to this topic to see the hidden content.
, but it would be not enough for RPCS3.

 

And if I have to spend money I prefer a CPU that can run Ridge Racer 7 at least at 30 fps. I think with background music off, it is quite playable.

 

I will have to decide between risking to buy a 2nd hand PS3 console and a PC HD monitor or HD TV, or just buy a high end PC.

 

As Ryzen CPUs are going lower in price, and that also lower Intel CPUs prices, I will have to be careful about what PC to buy, in order to get the best value for money.

For the moment, if I could afford it, I would prefer a Ryzen 7 2700 or an Intel Core i7 8700, they are both around the same price ( including a GTX 1050 GPU ). 

 

Edited by customizer2

Share this post


Link to post
Share on other sites

Hi Guys,

 

Thank you for this amazing list. Added some of these hidden gems to my cabinet many thanks!!

 

I am having extreme issues with removing trial versions of TMNT Re shelled and some other games.

 

Wondering if you guys know what I am missing here. 

 

Here are my steps:

 

Get the game from PSNStuff and updates if available.

Retrieve the edat file with PSNStuff and rename it to .rap

Put the .rap file under dev_hdd0/Home/000000001/exdate

 

Seems simple enough, but ingame it still shows the trial menu.

 

Anything else I am missing, seems RPCS3 has some issues unlocking trial games with this method. Even tried to leave as an edat and copy the files to the game folder but same issue...

 

Any help is appreciated!

 

 

Edit: Found the problem, the games were loaded from another drive and the dev_hdd0/Home/000000001 rested on that folder, the one in the emulator folder was not the correct one. Putting all the rap files on the new folder fixed the issue.

 

Thanks!

Edited by student123
Issue resolved

Share this post


Link to post
Share on other sites

Hey guys
thanks to your list, I discovered so many games that I did not know, and I think it's great.

Thank you all.

 

_____________________________________________________

Hidden Content

    Give reaction or reply to this topic to see the hidden content.

Hidden Content

    Give reaction or reply to this topic to see the hidden content.

Hidden Content

    Give reaction or reply to this topic to see the hidden content.

Edited by beyyy18

Share this post


Link to post
Share on other sites

@Houb

 

Moondiver, Resgun and Rush'n'Attack are even better running at 60fps!!!! 1. create a custom config, 2. edit with a text editor and change   Vblank Rate: 60 to   Vblank Rate: 120

Edited by ducon2016

Share this post


Link to post
Share on other sites
9 hours ago, ducon2016 said:

@Houb

 

Moondiver, Resgun and Rush'n'Attack are even better running at 60fps!!!! 1. create a custom config, 2. edit with a text editor and change   Vblank Rate: 60 to   Vblank Rate: 120

Thanks man, will give that a try :)!

Share this post


Link to post
Share on other sites
8 hours ago, student123 said:

Thanks man, will give that a try :)!

 

Yes try it, it is amazing. It makes those games even better than on the original PS3!

Share this post


Link to post
Share on other sites
7 hours ago, Safur said:

What is this Vblank please??

Hidden Content

    Give reaction or reply to this topic to see the hidden content.

 

But you do not need to understand what it means. Just change the line in the config file. In the config file it is "Vblank Rate: 60" change to "Vblank Rate: 120"

Edited by ducon2016

Share this post


Link to post
Share on other sites

Alors j'ai testé le Vblank en modifiant 60 pour 120 sur certains jeux (God Of War 3 et MotorStrom pacific Rift) et je n'ai remarqué aucun changement au niveau des fps. A moins que le Vblank se remette automatiquement à 60 et qu'il faille mettre le fichier de config en lecture seule.

Sinon je ne vois vraiment pas à quoi ça peut servir de modifier cette valeur...

Edited by Safur

Share this post


Link to post
Share on other sites
On 7/25/2019 at 3:06 AM, Safur said:

Alors j'ai testé le Vblank en modifiant 60 pour 120 sur certains jeux (God Of War 3 et MotorStrom pacific Rift) et je n'ai remarqué aucun changement au niveau des fps. A moins que le Vblank se remette automatiquement à 60 et qu'il faille mettre le fichier de config en lecture seule.

Sinon je ne vois vraiment pas à quoi ça peut servir de modifier cette valeur...

 Cette option debloque Les jeux bloques a 30fps. Cela ne rends pas ta machine plus rapide.

  • Thanks 1

Share this post


Link to post
Share on other sites

Je confirme ca débloque bien le framerate sur Moon Driver le jeu passe de 30fps à 60fps et la vitesse reste identique, c'est juste plus fluide :)

 

Par contre je viens de tester Resogun et le jeu passe bien de 30 à 60 fps mais il tourne aussi 2x plus vite et c'est injouable ;)

Edited by Houb

Share this post


Link to post
Share on other sites
5 hours ago, Houb said:

Je confirme ca débloque bien le framerate sur Moon Driver le jeu passe de 30fps à 60fps et la vitesse reste identique, c'est juste plus fluide :)

 

Par contre je viens de tester Resogun et le jeu passe bien de 30 à 60 fps mais il tourne aussi 2x plus vite et c'est injouable ;)

 

Essaye Clocks scale: 50  pour Resogun

Share this post


Link to post
Share on other sites
Il y a 4 heures, ducon2016 a dit :

Essaye Clocks scale: 50  pour Resogun

non malheureusement ça ne marche pas: le jeu reste accéléré

Share this post


Link to post
Share on other sites
Le 27/07/2019 à 11:32, Houb a dit :

non malheureusement ça ne marche pas: le jeu reste accéléré

J'ai eu le même soucis avec Motorstorm Pacific Rime. S'il dépasse les 30fps il est accéléré. Du coup je bloque les fps à 30.

Share this post


Link to post
Share on other sites

so i was trying playstation all stars battle royale the other day ... and it seems its running at 60fps most of the time in all the stages i tried except (dojo - parappa the rapper stage)..

i played with 2 or 3 players at the same time seems fine (versus or practice ) .. but arcade mode seems to crash for me after the first battle ... so i guess its really close to being playable

Share this post


Link to post
Share on other sites

 

 

MGS 4 Coming 

En  1 semaine ! Chapeau les mecs!

Vous trouverez une build custom de l'émulateur dans le decriptif de la vidéo , attention en vous attendez pas à ce que ça marche tout de suite .j'essaye trouver une config qui pourrais me faire dépasser l'écran titre pour l'instant mais la prouesse est énorme surtout que konami ne le rééditera surrement jamais  !

Ca c'est de la sauvegarde de patrimoine videoludique !  

 

Fox is not die !

Share this post


Link to post
Share on other sites

Oui, c'est sympa que Jojo redevienne jouable. Dommage que ses DLC posent probleme.

Une des solutions est donnee ici:

Hidden Content

    Give reaction or reply to this topic to see the hidden content.

Citation

The solution is by using the decrypted campaign files, so instead of data0100.edat you need to use data0100.dat (decrypted with TrueAncestor edat tool) but then renamed again back to "data0100.edat". Same is needed for data0200 through data0600.

J'ai jete un oeil sur TrueAncestor edat, mais je n'ai rien reussi a faire.

Si qqn sait decrypter les DLC (version USA), je suis preneur: j'adore Jojo.

Share this post


Link to post
Share on other sites

J'ai les  dlc décryptés et ça marche impec, mais seulement pour la version Euro... Si jamais...

 

 

Edited by Houb

Share this post


Link to post
Share on other sites

Merci pour la proposition Houb.:very-good:

Du coup, j'ai creusé un peu + et ca marche nickel. Voici mes notes:

 

Pour la version euro:
1) Installer les 3 packages
01-CAMPAIGN MODE PACK 2 UPDATE 4.21+
02-ALL CHARACTER DATA DLC PACK EU (NPEB01922)
03-JOJO'S BIZARRE ADVENTURE ALL STAR BATTLE EU ALL DLC FIX (NPEB01922)
2) Dans .config/rpcs3/dev_hdd0/game/NPEB01922/USRDIR/, on trouve plein de fichiers .edat. Les copier et les coller dans
.config/rpcs3/dev_hdd0/game/NPEB01922_DLC/USRDIR/

Pour la version US (qui contient aussi le francais d'ailleurs):
Ca ressemble, sauf que c'est NPUB31391/USRDIR a copier dans NPUB31391_DLC/USRDIR

-----------
For example,after the installation of DLC characters unlock pkg,Campaign Data pkg and Fix DLC pkg.There are two folders created under the directory \dev_hdd0\game,NPUB31391 and NPUB31391_DLC.You have to move all keyxxxx.edat files in folder NPUB31391 to the directory dev_hdd0\game\NPUB31391_DLC\USRDIR.The folder NPUB31391 can be deleted now.
Note:All 6 dlc edats (data0100.edat ~ data0600.edat) should be manual decrypted first by using TrueAncestor EDAT Rebuilder, then renames them back to dataxxxx.edat

Hidden Content

    Give reaction or reply to this topic to see the hidden content.

Version 1.65:
1) Lancer une 1ere fois le rebuilder: ca cree un dossier: edat. Fermer le programme
2) placer ses data0100.edat ~ data0600.edat dans ce dossier edat
3) Relancer rebuilder. Choisir 1: "decrypt edat only", puis A ("All")
4) Supprimer les fichier data0100.edat ~ data0600.edat de depart.
5) Renommer les fichiers decryptes de .dat en .edat
6) Les deplacer vers NPUB31391_DLC/USRDIR (ou NPEB01922_DLC/USRDIR/ si version euro)

 

J'ai fait qqes tentatives pour le passer en 60fps (au lieu de 30), mais ca n'a rien donné. Si qqn a reussi, je suis preneur de ses reglages...

 

Une partie des instructions pour activer les dlc vient d'ici: 

 

Edited by grandvent

Share this post


Link to post
Share on other sites

Au fait, Sony a sorti une maj du firmware. Pour ceux qui veulent, c'est ici:

Hidden Content

    Give reaction or reply to this topic to see the hidden content.

avec un chagelog tres detaille...

Citation

 

New for 4.85

This system software update improves system performance.

 

@Houb Un autre jeu type arcade a ajouter a la liste de la 1ere page (si tu veux):

galaga legions dx (je ne pense pas qu'il soit sorti sur pc)

 

  • Like 1

Share this post


Link to post
Share on other sites

Super! Effectivement il marche bien et il est très sympa, merci, j'ajoute !! :very-good:

 

Edit : J'en ai profité pour faire quelques modifs :

 

JoJo's Bizarre Adventure : All-Star Battle (BLES01986) => Audio: Buffering Disable or Audio Buffer Duration: 20ms

SoulCalibur V (BLES01250) => Write Color Buffer & Resolution Scale 100% (or Resolution Scale 300% & Resolution Scale Threshold 144x144) (Powerful CPU needed)

Under Defeat HD Deluxe Edition (BLES01752) => Disable Vertex Cache

 

Edited by Houb

Share this post


Link to post
Share on other sites

Mon PC : Intel Core i7 4790K 4.4 GHz / MSI GeForce GTX 1060 X6G / Ram 16Go Kingston HyperX DDR3 / Motherboard Gigabyte G1 Sniper B5

Bonjour à tous,

Super Topic que j'apprécie particulièrement car RPCS3 est un émulateur de plus en plus performant ! Moi aussi je n'installe que des jeux type "Arcade", si possible des exclues, car pour le reste autant les prendre au format PC. Mes trois coups de coeur testés ce mois-ci sont "Virtua Fighter 5", "Tekken 6" et "Time Crisis 4". Avec ma config les trois jeux passent impeccablement (60 FPS en moyenne) et ne présentent aucuns bugs graphiques. Je trouve d'ailleurs que VT5 est meilleur sur RPCS3 qu'avec Teknoparrot. Pour "Time Crisis 4 [BLUS30093]" (version Américaine) ne pas oublier d'activer le Write Color Buffers dans les options GPU pour enlever le voile blanc sur l'image. Une fois fait le jeu est parfait, est le lightgun est automatiquement émulé par la manette Xbox. C'est le seul jeu de tir pour PS3, je l'ai vu tourner dans une salle Arcade du côté de Biscarosse. Ma version de RPCS3 est la 00.6-8419-fcc75c8b Alpha :fiesta:Je poste la vidéo qui n'est pas de moi (j'ai la flemme pardon) mais j'ai le même rendu :

 

 

Merci pour les infos sur "Galaga Legions DX", je ne connaissais pas. Je vais moi aussi l'essayer.

  • Like 1

Share this post


Link to post
Share on other sites

I just want to check my problem with the game (time crisis razing storm)

After updating the new version 0.0.7-8759 Rpcs3, the game will not start.

 

For example, I choose Pirates Dead Storm and don't start the game.

 

Does anyone have this problem also in the new build ???

Share this post


Link to post
Share on other sites
Le 01/09/2019 à 19:10, tryphoxxx a dit :

Une fois fait le jeu est parfait, est le lightgun est automatiquement émulé par la manette Xbox. C'est le seul jeu de tir pour PS3, je l'ai vu tourner dans une salle Arcade du côté de Biscarosse.

Je vois qu'on a fréquenté la même salle d'arcade :) Le Trimaran à Biscarrosse plage.

J'y ai découvert tous les plus beaux jeux Arcade : Virtua Cop 1 et 2, Sega Rally, Daytona USA, Time Crisis et j'en passe!

Sans compter les nombreux flippers!!

Maintenant la salle a fermé et ce sont des boutiques à la con qui y sont à présent. Dégouté...

  • Like 1

Share this post


Link to post
Share on other sites
Has anyone been able to configure the mouse in the new version that came out with mouse support in guns games?

Hidden Content

    Give reaction or reply to this topic to see the hidden content.

Share this post


Link to post
Share on other sites
Il y a 14 heures, punkdark2000 a dit :

Has anyone been able to configure the mouse in the new version that came out with mouse support in guns games?

Hidden Content

    Give reaction or reply to this topic to see the hidden content.

I also had setup problems and I solved it.

 

The whole problem was that you need to change the settings not in the global pad settings but only on the specified game (Time crisis, for example), right mouse button on a specific game and there Change Configure:

 

Configure - I / O set

Move handler -Mouse
Camera Seting -Fake
Camera input- PS Eye

 

Only then does the game start to record the Move device and want to calibrate the move

after calibration, Mouse works perfectly.

 

Configure Pad:

 

Mouse acceleration - 30

Bez názvu.jpg

Edited by sonic323
  • Like 1

Share this post


Link to post
Share on other sites
1 hour ago, sonic323 said:

I also had setup problems and I solved it.

 

The whole problem was that you need to change the settings not in the global pad settings but only on the specified game (Time crisis, for example), right mouse button on a specific game and there Change Configure:

 

Configure - I / O set

Move handler -Mouse
Camera Seting -Fake
Camera input- PS Eye

 

Only then does the game start to record the Move device and want to calibrate the move

after calibration, Mouse works perfectly.

 

Configure Pad:

 

Mouse acceleration - 30

Bez názvu.jpg

I did exactly what you said and it worked out thank you very much, but I'm playing Dead Storm Pirates and the shots don't hit the characters although the mouse moves correctly. Do you know what it could be?

Share this post


Link to post
Share on other sites

I don't know,:gene:

it works well for me,


It may not have saved the calibration correctly


Canceling calibration is on my keyboard (C)
Saving Calibration (Mouse Midle)

 

Or the game low Framerate (Slow CPU ..)
Acceleration Mouse must be at - 30 (X, Y)

 

Mouse Works Perfect (Following Exactly Cursor )

Share this post


Link to post
Share on other sites

I see

 

I know why you can't

 

In GPU settings (Graphics)

 

checkmark - Vrite colors buffers    (and firing has an effect on enemies)

Edited by sonic323
  • Like 2

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×